+++ MUGEN MBX6 - Updated kit +++
09-14-2009, 05:20 PM
#1
+++ MUGEN MBX6 - Updated kit +++
Got an updated Mugen MBX6 kit I'd like to sell. I've raced the car once and have had 1 full practice day on it. It's in great shape, everything is still tight with no slop in the drivetrain--only thing that shows wear is the chassis. Looks a little shitty due the track surface being so abrasive. The body looks crappy too, I'm not that good at applying body skins....The car has a couple aluminum option parts too--rear uprights, center joint cups, front upper arm holder, steering posts and KHZ center diff top plate. I also have ALL the parts that came with the kit when it was new (box, manual, sticker sheet, setup sheet, tires, inserts, flywheel etc) and have a few spares I bought with the car, all new in package--I'll even throw in the some avid bearings and the Orion stick pack and Hitec switch I bought for it.....Servos and Transponder NOT included--They can be for the right price though.
B0315 #350 shock oil
C0257 Diff gaskets
E0154 bushing set (2)
E0520 oil seal set
E0238 Joint pin
E0150 rear lower arms
E0148 Front upper arms
E0151 Front uprights
E0149 Front lowers
E0147 lower arm mounts
C0751 .9mm clutch springs (2)
C0708 1.0mm cltuch springs (2)
Looking to get $525 shipped to the lower 48.
You need more pics, LMK
Paypal preferred only to confirmed addresses--PLEASE!
B0315 #350 shock oil
C0257 Diff gaskets
E0154 bushing set (2)
E0520 oil seal set
E0238 Joint pin
E0150 rear lower arms
E0148 Front upper arms
E0151 Front uprights
E0149 Front lowers
E0147 lower arm mounts
C0751 .9mm clutch springs (2)
C0708 1.0mm cltuch springs (2)
Looking to get $525 shipped to the lower 48.
You need more pics, LMK
Paypal preferred only to confirmed addresses--PLEASE!
Last edited by ViLL; 09-14-2009 at 09:32 PM.
09-17-2009, 05:19 AM
#4
Interested in any trades?
09-26-2009, 12:03 PM
#10
Leaving RC......
OK, I just have lost all desire to tinker with any of my RC stuff...I'm almost tired of seeing sit in the garage. I would like to unload all of it as a package deal.
Please read, most of this is off the top of my head
.....
Here's what I have....
CARS
Mugen MBX6, the updated kit. I've raced the car once and have had 1 full practice day on it. It's in great shape, everything is still tight--only thing that shows wear is the chassis. Looks a little shitty due the track surface being so abrasive. The body looks crappy too, I'm not that good at applying body skins....The car has a couple aluminum option parts too--rear uprights, center joint cups, front upper arm holder, steering posts and KHZ center diff top plate. I also have ALL the parts that came with the kit when it was new (box, manual, sticker sheet, setup sheet, inserts, flywheel etc) and have a few spares I bought with the car, all new in package:
B0315 #350 shock oil
C0257 Diff gaskets
E0154 bushing set (2)
E0520 oil seal set
E0238 Joint pin
E0150 rear lower arms
E0148 Front upper arms
E0151 Front uprights
E0149 Front lowers
E0147 lower arm mounts
C0751 .9mm clutch springs (2)
C0708 1.0mm cltuch springs (2)
Kyosho MP9 TKI, this car has maybe 2 gallons on it. It's got option aluminum parts to include the radio posts, wing and rear toe plate. Other option parts include the 48t spur, lime colored springs and 1.3 shock pistons. Current 'C' bulkheads in place, car comes with many loose parts and a bunch of new parts that I have new in package.
Kyosho GT2 Red Bull Audi roller
Parts and mods include K factory captured hinge pins thoughout, evolva 2spd gear mod, GS center dogbones, Lundsford Ti steering rod, ST-RR HD servo saver, rear sway bar and Kyosho MP9 brake disc and calipers, extra pinions and misc gears. Sitting on a set of Ipanema tires. One of the rear dogbones is a little bent, but it doesn't seem to affect anything--new dogbones run about $8 a set.
Engines and engine accessories
Novarossi 821B, engine has exactly 2 gallons on it--I know this because bearings where changed out after the first gallon and I just burned the 2nd. TKO bearings front and rear, the crank intake ramp was epoxy filled by Pete Worth when it was new. I swapped the carb out with a Mario Rossi Ninja carb--All is good. Just installed an almost new Asendency racing clutch on it too....
Novarossi Plus 21-4, this engine has just over 2 gallons....maybe 2gal and a couple hundred cc's--and I know this because my buddy changed the bearings out at 2gals and we ran the bearings in on a practice day. Hasn't been ran since, just stored in a bag.
Novarossi 9901 hardcoated--stinger was slightly tapped and it bent. JB fixed it--looks good, performs well
Novarossi 9853--some dents, some JB weld added for rigidity. Looks good, performs well.
(2) MSR 1005s--one hardcoated, the other plain. Pipes look used but they perform well.
Manifolds--Werks conical set (S,M,L), RB 98mm, MSR square
Radio
Futaba 4PK with aluminum carrying case
(2) Futaba 604FS receivers
Electronics
(2) AMB personal transponders
(3) Hitec 5955's
(2) Orion Vortex 2015's
(1) ACE 1015
(2) Mugen Starter boxes w/ nimh pack batteries--both have Deans connectors on them.
Shock oils & diff oils
A whole bunch of them....
Misc stuff
A big bag of mixed Tony's Screws
servo horns
engine stuff
clutches
flywheels
bearings (TKO / Avids)
glow plugs
Tools
Tools
TM F8 hauler bag
Craftsman pitbag
Fuel bottles
Fuel gun
stuff
stuff and more stuff
Kyosho, Proline, Futaba banners
Box of stickers
A whole bunch of little things....I will take pics of it all later. I do have a stock Slash as well with a couple of 3200 orion nimh packs, orion lipo clubman charger and power supply I MIGHT hold onto.....truck belongs to my son and he's just not that into it. If he doesn't want it, it's included in the sale.
$$$ I want $3900 shipped for it all $$$
Will ship in multiple boxes to get everything out at once....
Please read, most of this is off the top of my head
.....Here's what I have....
CARS
Mugen MBX6, the updated kit. I've raced the car once and have had 1 full practice day on it. It's in great shape, everything is still tight--only thing that shows wear is the chassis. Looks a little shitty due the track surface being so abrasive. The body looks crappy too, I'm not that good at applying body skins....The car has a couple aluminum option parts too--rear uprights, center joint cups, front upper arm holder, steering posts and KHZ center diff top plate. I also have ALL the parts that came with the kit when it was new (box, manual, sticker sheet, setup sheet, inserts, flywheel etc) and have a few spares I bought with the car, all new in package:
B0315 #350 shock oil
C0257 Diff gaskets
E0154 bushing set (2)
E0520 oil seal set
E0238 Joint pin
E0150 rear lower arms
E0148 Front upper arms
E0151 Front uprights
E0149 Front lowers
E0147 lower arm mounts
C0751 .9mm clutch springs (2)
C0708 1.0mm cltuch springs (2)
Kyosho MP9 TKI, this car has maybe 2 gallons on it. It's got option aluminum parts to include the radio posts, wing and rear toe plate. Other option parts include the 48t spur, lime colored springs and 1.3 shock pistons. Current 'C' bulkheads in place, car comes with many loose parts and a bunch of new parts that I have new in package.
Kyosho GT2 Red Bull Audi roller
Parts and mods include K factory captured hinge pins thoughout, evolva 2spd gear mod, GS center dogbones, Lundsford Ti steering rod, ST-RR HD servo saver, rear sway bar and Kyosho MP9 brake disc and calipers, extra pinions and misc gears. Sitting on a set of Ipanema tires. One of the rear dogbones is a little bent, but it doesn't seem to affect anything--new dogbones run about $8 a set.
Engines and engine accessories
Novarossi 821B, engine has exactly 2 gallons on it--I know this because bearings where changed out after the first gallon and I just burned the 2nd. TKO bearings front and rear, the crank intake ramp was epoxy filled by Pete Worth when it was new. I swapped the carb out with a Mario Rossi Ninja carb--All is good. Just installed an almost new Asendency racing clutch on it too....
Novarossi Plus 21-4, this engine has just over 2 gallons....maybe 2gal and a couple hundred cc's--and I know this because my buddy changed the bearings out at 2gals and we ran the bearings in on a practice day. Hasn't been ran since, just stored in a bag.
Novarossi 9901 hardcoated--stinger was slightly tapped and it bent. JB fixed it--looks good, performs well
Novarossi 9853--some dents, some JB weld added for rigidity. Looks good, performs well.
(2) MSR 1005s--one hardcoated, the other plain. Pipes look used but they perform well.
Manifolds--Werks conical set (S,M,L), RB 98mm, MSR square
Radio
Futaba 4PK with aluminum carrying case
(2) Futaba 604FS receivers
Electronics
(2) AMB personal transponders
(3) Hitec 5955's
(2) Orion Vortex 2015's
(1) ACE 1015
(2) Mugen Starter boxes w/ nimh pack batteries--both have Deans connectors on them.
Shock oils & diff oils
A whole bunch of them....
Misc stuff
A big bag of mixed Tony's Screws
servo horns
engine stuff
clutches
flywheels
bearings (TKO / Avids)
glow plugs
Tools
Tools
TM F8 hauler bag
Craftsman pitbag
Fuel bottles
Fuel gun
stuff
stuff and more stuff
Kyosho, Proline, Futaba banners
Box of stickers
A whole bunch of little things....I will take pics of it all later. I do have a stock Slash as well with a couple of 3200 orion nimh packs, orion lipo clubman charger and power supply I MIGHT hold onto.....truck belongs to my son and he's just not that into it. If he doesn't want it, it's included in the sale.
$$$ I want $3900 shipped for it all $$$
Will ship in multiple boxes to get everything out at once....
10-21-2009, 08:13 AM
#11
Tech Rookie
Do you still have the mugen + parts?
10-21-2009, 03:00 PM
#13
Tech Rookie
Will you accept $350 for the mugen as listed in your first post?
Just out of curiosity are you USAF? I spent the 1990's with the USAF mainly in Europe.
Just out of curiosity are you USAF? I spent the 1990's with the USAF mainly in Europe.
Last edited by Giri; 10-21-2009 at 11:55 PM.
