Go Tech 7 port, Trinity Big Boy, Starter box, etc for sale - conversion sale!
08-08-2009, 09:19 AM
#1
Go Tech 7 port, Trinity Big Boy, Starter box, etc for sale - conversion sale!
I don't have the time for nitro with school and work so I need to convert my truggy to brushless. Everything is in good shape and works FLAWLESSLY. All of this was in my race rig, so it's always kept in perfect shape. This setup is FAST! Prices are without shipping. You pay actual shipping so it's up to you how fast you want it there. If you want all of this, PM me and we'll work out a deal.
First up is a Go Tech 7 port with quite a few extra parts - 3 gallons and 1 quart on this powerhouse. This is a gen 5 engine with an OS carb on it. Makes tuning a breeze and holds the tune forever. Has a 5 port head on there right now since the 7 port head had a fin come loose. Also, I just replaced the rod 1 quart ago, so it's good to go for a season of racing. Extra parts: 7 port head, 5 port crankcase, two extra con rods, Go Tech 5 port carb, backplate, misc hardware. Comes with an OS P3 plug OR a O'Donnell 77T. Used after run oil except when I used Sidewinder
Asking $90
Next up is a Trinity Big Boy pipe. It's in excellent condition, no dents or kinks, ready to go with springs and gaskets. Needs nothing. Bolt it on and RIP!
Asking $40
Ofna Chrome Top starter box. Has the 12V big motor in it and a 7.2Ah 12V Gel Cell with battery hold down. Works great, comes with two top posts and I added a carrying handle to make it easier to tote around. This box starts my truck EVERY time!
Asking $45
You can PM me here or reply to this thread to get ahold of me. If anyone wants the nitro components like the clutch, fuel tank, motor, etc, please PM me and we can work that out. I'm looking for the following in trades:
Tekin RX8 truggy combo or just the ESC itself
Neu brand motors (this includes Tekno Neu)
4s and 5s lipos
good 4s+ lipo charger (Hyperion is my brand of choice)
Pictures of everything while still in my truggy (can take them out and take more pics for you):
After the 7 port head had a fin come loose
First up is a Go Tech 7 port with quite a few extra parts - 3 gallons and 1 quart on this powerhouse. This is a gen 5 engine with an OS carb on it. Makes tuning a breeze and holds the tune forever. Has a 5 port head on there right now since the 7 port head had a fin come loose. Also, I just replaced the rod 1 quart ago, so it's good to go for a season of racing. Extra parts: 7 port head, 5 port crankcase, two extra con rods, Go Tech 5 port carb, backplate, misc hardware. Comes with an OS P3 plug OR a O'Donnell 77T. Used after run oil except when I used Sidewinder
Asking $90
Next up is a Trinity Big Boy pipe. It's in excellent condition, no dents or kinks, ready to go with springs and gaskets. Needs nothing. Bolt it on and RIP!
Asking $40
Ofna Chrome Top starter box. Has the 12V big motor in it and a 7.2Ah 12V Gel Cell with battery hold down. Works great, comes with two top posts and I added a carrying handle to make it easier to tote around. This box starts my truck EVERY time!
Asking $45
You can PM me here or reply to this thread to get ahold of me. If anyone wants the nitro components like the clutch, fuel tank, motor, etc, please PM me and we can work that out. I'm looking for the following in trades:
Tekin RX8 truggy combo or just the ESC itself
Neu brand motors (this includes Tekno Neu)
4s and 5s lipos
good 4s+ lipo charger (Hyperion is my brand of choice)
Pictures of everything while still in my truggy (can take them out and take more pics for you):
After the 7 port head had a fin come loose
08-11-2009, 04:59 PM
#8
TTT, first come first serve. After tomorrow it won't be available. I'll probably be selling the entire truggy if anyone wants to make an offer.
Specs:
Mugen MBX5T ProSpec
BCE chassis
quick change mount
MBX6 big bores
DE Racing skids
Go Tech7 port
Big Boy pipe
AKA Soft City Blocks on Rulux half ups (45 min total runtime! kept in bags in between practices)
dual Hitec 5955TG servos
Protek Hump pack
Airtronics M8 with 2.4Ghz DSSS with TWO receivers (one has very short antenna)
M8 has broken batt door but rechargable Nicd pack, charger, and aluminum carry case
white Himoto wing with white Mugen body
Ofna 12V starter box with gel cell
And anything else I can think of. RTR, needs only fuel. I bought locally in Olympia or Seattle area I'll give the buyer the rest of my Sidewinder 30% and a fuel bottle. Looking at $475 shipped for the whole lot. Charge it up, add fuel, go. Can't beat a race ready deal like this. I'll keep it and do the conversion if nobody wants to give me what I want for it. It's a fantastic truck!
Specs:
Mugen MBX5T ProSpec
BCE chassis
quick change mount
MBX6 big bores
DE Racing skids
Go Tech7 port
Big Boy pipe
AKA Soft City Blocks on Rulux half ups (45 min total runtime! kept in bags in between practices)
dual Hitec 5955TG servos
Protek Hump pack
Airtronics M8 with 2.4Ghz DSSS with TWO receivers (one has very short antenna)
M8 has broken batt door but rechargable Nicd pack, charger, and aluminum carry case
white Himoto wing with white Mugen body
Ofna 12V starter box with gel cell
And anything else I can think of. RTR, needs only fuel. I bought locally in Olympia or Seattle area I'll give the buyer the rest of my Sidewinder 30% and a fuel bottle. Looking at $475 shipped for the whole lot. Charge it up, add fuel, go. Can't beat a race ready deal like this. I'll keep it and do the conversion if nobody wants to give me what I want for it. It's a fantastic truck!
