FS: E-revo RTR with lots of extras
#1
FS: E-revo RTR with lots of extras
ok...i wanna get a losi 8ight-e 2.0..so imma sell my heavily modded revo to fund it:
E-revo chassis
2 bodies (1 blue in pretty good shape, 1 cut/rought red body for bashing)
RPM true Track conversion on rear
RPM front arms and steering block thing
Proline single side servo saver arm
TS170 titanium gear servo w/blue aluminum horn (identical to a 7955/5955)
MMM v3 (beta..the good one)
2200kv neu/cc motor (2 packs on it total)
2x Turnigey 5000mah 20/30c lipo's (says 15/20 on pack but it's a misprint..go look on hobbycity.com to verify)
2x 16t, 1x 19t mod .8 pinions
62t and 68t spurs
silver, blue, green, white springs
70wt shock oil
traxxas sway bar setup
steel CVD's
just rebuilt front diff
17mm adapters
14 mm metal hexs (need pins/washers though..i never used them)
3pm 2.4ghz FASST radio
603fs rx
2 sets of LRP Holeshots on white 1/2" offset wheels (90-95%)
1 set of yellow wheels with holeshots (90%)
1 set of crimefighters on 0 offset white wheels (50-60% i think)
1 set of orange painted wheels with "nubbies" tires
1 rough set of talons
1 set of almost brand new response tires on 5 star TRX wheels
all stock arms and rods that were removed for RPM stuff
stock EVX esc
Titan 775 motor
novak 4s smart lipo cutoff
has a series harness made with deans and has the cutoff wired on
also have a parallel harness for MMM that has 2 spots for an external bec on it.
The front rpm arms do have some rub marks on them from running the 0 offset wheels with the steering epa not set correctly...but it doesn't HURT anything. I might can even get some more arms to go wiht it...but not sure. The epa is set now after i did the single servo conversion (steering is FAST)
so...pictures tonight, but wanted to post now
REDUCED TO $750
E-revo chassis
2 bodies (1 blue in pretty good shape, 1 cut/rought red body for bashing)
RPM true Track conversion on rear
RPM front arms and steering block thing
Proline single side servo saver arm
TS170 titanium gear servo w/blue aluminum horn (identical to a 7955/5955)
MMM v3 (beta..the good one)
2200kv neu/cc motor (2 packs on it total)
2x Turnigey 5000mah 20/30c lipo's (says 15/20 on pack but it's a misprint..go look on hobbycity.com to verify)
2x 16t, 1x 19t mod .8 pinions
62t and 68t spurs
silver, blue, green, white springs
70wt shock oil
traxxas sway bar setup
steel CVD's
just rebuilt front diff
17mm adapters
14 mm metal hexs (need pins/washers though..i never used them)
3pm 2.4ghz FASST radio
603fs rx
2 sets of LRP Holeshots on white 1/2" offset wheels (90-95%)
1 set of yellow wheels with holeshots (90%)
1 set of crimefighters on 0 offset white wheels (50-60% i think)
1 set of orange painted wheels with "nubbies" tires
1 rough set of talons
1 set of almost brand new response tires on 5 star TRX wheels
all stock arms and rods that were removed for RPM stuff
stock EVX esc
Titan 775 motor
novak 4s smart lipo cutoff
has a series harness made with deans and has the cutoff wired on
also have a parallel harness for MMM that has 2 spots for an external bec on it.
The front rpm arms do have some rub marks on them from running the 0 offset wheels with the steering epa not set correctly...but it doesn't HURT anything. I might can even get some more arms to go wiht it...but not sure. The epa is set now after i did the single servo conversion (steering is FAST)
so...pictures tonight, but wanted to post now
REDUCED TO $750
Last edited by GSRswapandslow; 07-28-2009 at 11:51 AM.