Fully Muggified LST2 with a lot of hop-ups.
#1
Fully Muggified LST2 with a lot of hop-ups.
I need to fund another project.... Here are some pics of my Muggified LST2 that was used once for a brushless set up. Now it can be used either for a Nitro setup or brushless.
If you want it as is $250, if you want it with the TDR brushless motor mount, Single speed hub, and rc-monster pinions $300. add $20 for ground shipping in the US. Send me PM if you are anywhere else and want a price quote.
RPM Arms w/ Lunsford tie rods
New Era Knuckles
Losi 15 degree carriers
DPP Racing Muggified Wing Mount
Muggy shock towers
Muggy shocks
Losi HD skid plates - all 3, plus you get another extra set of HD plates
Losi 1/2 offset wheel hubs
Vantage racing carbon fiber diff cover - brand new, only good for nitro user.
LST2 Body - still in good condition
Proline body - brand spankin new
Lunsford turnbuckles
Losi Tini inner hinge pins
ST Racing Concepts Lock-nut style outer hinge pin kit
Losi Carbon Fiber Main chassis
Losi Carbon Fiber top plates
FOC mod to tranny + gear swap mod
Dynamite engine brace
2 spare sleeved clutch bells, 1 stock clutchbell - no gears
3mm screw upgrade, and additional bolt upgrades throughout chassis
Nova diff front and rear - can't see them, but I guarantee they are there.
Set of wheels and tires - Proline holeshots with decent amount of tread still.
I am sure there is more and I will list when I remember. I just want to get this out there. For those who want this for a brushless conversion, I will give you the motor mount, and a battery tray. I mounted the battery tray in front between tranny and servos for better weight balance. I used motor braking by using red loctite on a RC-monster 2 speed adapter. You will get all the brushless stuff if you want it for that. Just PM me if you have questions or offers. Thanks.
If you want it as is $250, if you want it with the TDR brushless motor mount, Single speed hub, and rc-monster pinions $300. add $20 for ground shipping in the US. Send me PM if you are anywhere else and want a price quote.
RPM Arms w/ Lunsford tie rods
New Era Knuckles
Losi 15 degree carriers
DPP Racing Muggified Wing Mount
Muggy shock towers
Muggy shocks
Losi HD skid plates - all 3, plus you get another extra set of HD plates
Losi 1/2 offset wheel hubs
Vantage racing carbon fiber diff cover - brand new, only good for nitro user.
LST2 Body - still in good condition
Proline body - brand spankin new
Lunsford turnbuckles
Losi Tini inner hinge pins
ST Racing Concepts Lock-nut style outer hinge pin kit
Losi Carbon Fiber Main chassis
Losi Carbon Fiber top plates
FOC mod to tranny + gear swap mod
Dynamite engine brace
2 spare sleeved clutch bells, 1 stock clutchbell - no gears
3mm screw upgrade, and additional bolt upgrades throughout chassis
Nova diff front and rear - can't see them, but I guarantee they are there.
Set of wheels and tires - Proline holeshots with decent amount of tread still.
I am sure there is more and I will list when I remember. I just want to get this out there. For those who want this for a brushless conversion, I will give you the motor mount, and a battery tray. I mounted the battery tray in front between tranny and servos for better weight balance. I used motor braking by using red loctite on a RC-monster 2 speed adapter. You will get all the brushless stuff if you want it for that. Just PM me if you have questions or offers. Thanks.
#3
You gotta pm
#5
Pm returned, $$$ sent
#6
whats left?? ttt