REVO 3.3 Race Ready!
07-09-2009, 08:43 AM
#1
REVO 3.3 Race Ready!
Body installed is a JConcepts, and was used as a practice body (it was new in this pic) so it has some war wounds and cracking and such, but is still perfectly useable.
The wheels shown are included, but I don't typically run them. I have a set of yellow dish on there at the moment with I believe Crimefighters mounted up that will be on the truck when shipped.
Here is some more tech info on it:
-TRX 3.3 (pullstart) motor with @ 15-20 tank on it total (new motor)
-Single Servo Steering (Tower Pro Servo) conversion with ProLine Aluminum Arm
-Red Tie Rods all around (2 not installed yet in the rear)
-Tekin Wing Mount with Black ProLine Wing
-17mm hub upgrade
-2 sets of wheels
-Forward Only conversion
-Steel Spur Gear
-Brand new Pro-Line Air Filter/Tube
Spare parts (see pic link below):
-NIP MIP Clutch
-Stock Revo Wheels (14mm hex)
-23mm White dish wheels with tires (23mm hex)
-LOTS of Tranny Parts (Wide Ratio and Close Ratio Gears)
-2 OptiDrive units (if you ever want to put reverse back in)
-Spare Driveshafts
-Spare Arms
-3 or 4 brand new spur gears of varying sizes
-3 or 4 sets of spare rockers
-Handful of spare tie rods
-Spare Exhaust Pipe and Header
-2 Spare Diffs
-Spare Steering setup
-Spare Shock Mounts
-Shock Rebuild Kits
-Spare Complete set of Spare Shocks
-TONS of spare shock springs
-Plus more (see pics below)
Here is a link to pics of all my spare parts: http://picasaweb.google.com/spouliot/Revo33Parts#
I also have a spare custom painted body that I can toss in for an extra $40 (NEVER mounted it or drilled it). To sweeten the deal, I'll even throw in a spare motor for it. It's a TRX 2.5, but it only has @ 1 gallon or so through it. Not as powerful as the 3.3, but would work great as a backup. That's all I used it for as well. I also have the original box that the Revo in as well, but that would be a bit hard to ship.
GREAT Truck that has never let me down....and runs GREAT at the local track. I have converted to a Truggy so the Revo is not getting the love it deserves.
If you want more pics, just ask. The pic shown above is from when the body and wing were new. I will post updated pics for interested buyers.
Here is a pic of the custom lid sitting on the Revo. Still have no drilled it!
I WILL NOT PART THIS OUT YET.
Asking $430 shipped for everything. No radio is included. Add a radio and fuel....and go racing. I will entertain offers and trades, but please no junk...and I have no interest in onroad vehicles. I have 3 that I never use. Off road trades only please....or tools...or what else you got?
Price update. $400 shipped for EVERYTHING I have that is Revo related.
Last edited by MotoGod; 10-07-2009 at 08:03 AM. Reason: Price Drop
07-09-2009, 09:49 AM
#2
would you trade for a savage with hop ups or mabye my baby. my baby is a t-maxx bith american cnc aluminum bigblock chassis aluminum bulkheads and a bunch of other stuff. how about my aluminum t-maxx and another stock t-maxx. rollers or will trade my aluminum with a ofna .26
07-09-2009, 10:12 AM
#4
I don't really need any Monster Trucks or I would just keep this one. I bought it to race...and my local track never seems to have enough to run a PMT class...so they toss me in with the Truggies. I bit the bullet and just bought a Truggy so now the Revo sits on the shelf....
I don't bash much otherwise I would love a Savage.....but I just traded away my Savage roller as well since it was a shelf queen as well.
Really looking for a nice buggy, or a 1/8th scale Brushless setup for my Truggy, or some LIPOs, Tools...etc etc etc
I don't bash much otherwise I would love a Savage.....but I just traded away my Savage roller as well since it was a shelf queen as well.
Really looking for a nice buggy, or a 1/8th scale Brushless setup for my Truggy, or some LIPOs, Tools...etc etc etc
07-09-2009, 10:22 AM
#5
i got a n 1/8 scale buggy. sportwerks turmoil. i raced it a half a seanson and then bought a truggy. it is like brand new. ill trade you that + ofna.26+associated fm digital radio. i will make the buggy rtr for that revo. its a great buggy and since i dont run buggy it just sits.
07-09-2009, 11:34 AM
#7
i just bought it in april. plus i have all of the spare parts to rebuild it. man i really want that revo its just to pricy. plz consider somthing. slash with mamba 5700 1/8 buggy tires. the truck does like 60 on a 2cell lipo. how about a slash with mamba and common sense 2 cell lipo. lipo has 3 cycles.
07-09-2009, 11:52 AM
#8
I just checked their site...and yeah they are discontinuing their lines. I already have a Spec Slash and a Mod Slash as well.... I'll do some research on the Turmoil and get back to you....but my gut says it's not really what I'm looking for...
07-13-2009, 10:14 AM
#14
hey would you consider a trades for a rc10gt2 here is what comes with it let me know thanks
1. RC10GT2 RTR
2. STARTER BOX
3. O.S. .12TG LESS THEN ONE GALLON RUN THROUGH ENGINE
4. MOTOR SAVER AIR FILTER
5. THS SIDE PIPE AND MANIFOLD
6. RPM ARMS ALL AROUND
7. RPM FRONT BUMPER
8. STAINLESS STEEL SCREWS ALL AROUND
9. FACTORY TEAM TURNBUCKLES ALL AROUND
10. FACTORY TEAM FLYWHEEL AND MOTOR MOUNTS (FOR BUMP START)
11. FACTORY TEAM CHASIS BRACE
12. J CONCEPTS PAINTED BODY
13. FUTABA 3 WAY CHARGING SWITCH
14. TEAM ORION 1600 BATTERY
AS FOR THE TIRES I HAVE
1. COMPLETE SET OF ONROAD TIRES FROM (TEAM ORION)
2. FRONT TIRES ARE PRO-LINE EDGE
3. REAR TIRES ARE PRO-LINE GLADIATORS
4. REAR TIRES ARE PRO-LINE BOW-TIES
1. RC10GT2 RTR
2. STARTER BOX
3. O.S. .12TG LESS THEN ONE GALLON RUN THROUGH ENGINE
4. MOTOR SAVER AIR FILTER
5. THS SIDE PIPE AND MANIFOLD
6. RPM ARMS ALL AROUND
7. RPM FRONT BUMPER
8. STAINLESS STEEL SCREWS ALL AROUND
9. FACTORY TEAM TURNBUCKLES ALL AROUND
10. FACTORY TEAM FLYWHEEL AND MOTOR MOUNTS (FOR BUMP START)
11. FACTORY TEAM CHASIS BRACE
12. J CONCEPTS PAINTED BODY
13. FUTABA 3 WAY CHARGING SWITCH
14. TEAM ORION 1600 BATTERY
AS FOR THE TIRES I HAVE
1. COMPLETE SET OF ONROAD TIRES FROM (TEAM ORION)
2. FRONT TIRES ARE PRO-LINE EDGE
3. REAR TIRES ARE PRO-LINE GLADIATORS
4. REAR TIRES ARE PRO-LINE BOW-TIES