FS: rc8t brushless tekin rx8 dx3s zippy 5s lipos
07-07-2009, 12:51 AM
#1
FS: rc8t brushless tekin rx8 dx3s zippy 5s lipos
I can't believe i'm doing this but it has to be done 
selling my brushless converted FT rc8t kit....i will either sell as a complete RTR kit with lipos or i will part it out...first a little background on the items:
FT rc8t used for only 3 months on the track never bashed just raced around the track...in great shape no leaky shocks...the underside of the chassis is scratched but IS NOT bent or warped...i have plastic skids on the rear and i used to have one on the front but it broke so i put the stock bumper back on....
RC8t was never ran as a nitro and assembled as a kit and converted to brushless using the AE electric conversion kit EXCEPT for the battery tray...i opted to use Losi's battery tray due to its size and ability to accept lipos batteries of various sizes....losi tray is mounted using delrin and countersunk screws and is SOLID....diffs are front=10k center=30k rear=7k fluid....i also moved the rear body mounts lower to mount a losi 8ight-t 2.0 body which looks great IMO....wing is a little scratched but not broken...and there are lunsford titanium hinge pins installed as well....the tekin rx8 and 1700kv motor combo was only ran once after i got it back from warranty repairs form tekin so it has the updated rotors and the rx8 had the updated fixes and it has only one run on it.....comes with losi xtt tires...the one on the white rims has 75% tread left while the one on the yellow rims has 90% tread left...dx3s is only 1 month old as well as the sr3000t....the only telemetry hooked up is the temp sensor and its wrapped around the motor
...four 5s 5000mah lipos.....3 are zippy-h 20-30C lipos and 1 is a 30c flightmax lipo always balanced while charging and never over discharged....and i will be selling the spare parts as a complete package
Ok stuff for sale:
RC8t AS A factory team electric converted ROLLER: $330
hitec 5995TG servo:$50
tekin rx8 :$200 SOLD
tekin 1700kv t8 truggy motor:$130 SOLD
dx3s AND sr3000t:$200 SOLD
zippy and flightmax 5s 5000mah lipos: $150 SOLD
spare parts package:$50
the following are all nip:
-fr/rr gearbox
-shock bushings
-shock risersx2
-hot racing after market aluminum shock risers
-gear box gasket
-chassis brace rod ends
-nyloc wheel nuts
-shock rod ends
-losi bearings (same size as the inner rear hub bearings
-protek bearings (same size as the outer rear hub bearings)
-steering block bushings
-shock boots
-de racing rear chassis skid paltes x2
-cva fr/rr re-build kit
-rear turnbuckles
-fr/rr sway bars and hardware
-arm mount c
-inner hinge pins
the following are NOT nip:
-50t spur gear
-steering knuckles
-center cva re-build kit...enough left for one more re-build
now....as a complete package i will let ALL of this go for $950 shipped....all of this was adult owned and maintained and my user name on ebay is cacuucd and i have 100% feedback and intend to keep it that way....pm and post if you have any questions..once you do i will give you my phone number if you would like to contact me directly...i just want an online record of our dealings...i will also do OBO's but no low-ball offers..this is a great and durable truggy esp with the factory team upgrades....and all prices listed include shipping
selling my brushless converted FT rc8t kit....i will either sell as a complete RTR kit with lipos or i will part it out...first a little background on the items:
FT rc8t used for only 3 months on the track never bashed just raced around the track...in great shape no leaky shocks...the underside of the chassis is scratched but IS NOT bent or warped...i have plastic skids on the rear and i used to have one on the front but it broke so i put the stock bumper back on....
RC8t was never ran as a nitro and assembled as a kit and converted to brushless using the AE electric conversion kit EXCEPT for the battery tray...i opted to use Losi's battery tray due to its size and ability to accept lipos batteries of various sizes....losi tray is mounted using delrin and countersunk screws and is SOLID....diffs are front=10k center=30k rear=7k fluid....i also moved the rear body mounts lower to mount a losi 8ight-t 2.0 body which looks great IMO....wing is a little scratched but not broken...and there are lunsford titanium hinge pins installed as well....the tekin rx8 and 1700kv motor combo was only ran once after i got it back from warranty repairs form tekin so it has the updated rotors and the rx8 had the updated fixes and it has only one run on it.....comes with losi xtt tires...the one on the white rims has 75% tread left while the one on the yellow rims has 90% tread left...dx3s is only 1 month old as well as the sr3000t....the only telemetry hooked up is the temp sensor and its wrapped around the motor
...four 5s 5000mah lipos.....3 are zippy-h 20-30C lipos and 1 is a 30c flightmax lipo always balanced while charging and never over discharged....and i will be selling the spare parts as a complete package
Ok stuff for sale:
RC8t AS A factory team electric converted ROLLER: $330
hitec 5995TG servo:$50
tekin rx8 :$200 SOLD
tekin 1700kv t8 truggy motor:$130 SOLD
dx3s AND sr3000t:$200 SOLD
zippy and flightmax 5s 5000mah lipos: $150 SOLD
spare parts package:$50
the following are all nip:
-fr/rr gearbox
-shock bushings
-shock risersx2
-hot racing after market aluminum shock risers
-gear box gasket
-chassis brace rod ends
-nyloc wheel nuts
-shock rod ends
-losi bearings (same size as the inner rear hub bearings
-protek bearings (same size as the outer rear hub bearings)
-steering block bushings
-shock boots
-de racing rear chassis skid paltes x2
-cva fr/rr re-build kit
-rear turnbuckles
-fr/rr sway bars and hardware
-arm mount c
-inner hinge pins
the following are NOT nip:
-50t spur gear
-steering knuckles
-center cva re-build kit...enough left for one more re-build
now....as a complete package i will let ALL of this go for $950 shipped....all of this was adult owned and maintained and my user name on ebay is cacuucd and i have 100% feedback and intend to keep it that way....pm and post if you have any questions..once you do i will give you my phone number if you would like to contact me directly...i just want an online record of our dealings...i will also do OBO's but no low-ball offers..this is a great and durable truggy esp with the factory team upgrades....and all prices listed include shipping
Last edited by hootie7159; 07-08-2009 at 10:01 PM.
07-07-2009, 12:53 AM
#2
more pics
07-07-2009, 12:18 PM
#5
Sorry to all who pm'ed me but this thing is sold as a RTR pendng payment...if you pm'ed me i will update you on whether this thing sold or not...
07-07-2009, 02:31 PM
#6
ok....still for sale:
rc8t roller:$350 shipped...w/ servo...$400 shipped..w spare parts...$450 shipped
tekin 1700kv t8 truggy motor: $130 shipped (has updated rotor)
5s 5000mah lipos x4:$150 shipped
hitec 5995tg servo:$60 shipped
spare parts lot:$70 shipped
*id like to move the roller/servo/spare parts as one so i'm open to OBO's
rc8t roller:$350 shipped...w/ servo...$400 shipped..w spare parts...$450 shipped
tekin 1700kv t8 truggy motor: $130 shipped (has updated rotor)
5s 5000mah lipos x4:$150 shipped
hitec 5995tg servo:$60 shipped
spare parts lot:$70 shipped
*id like to move the roller/servo/spare parts as one so i'm open to OBO's
07-07-2009, 05:16 PM
#8
ok...still for sale:
rc8t roller
hitec 5995tg
spare parts lot
tekin 1700kv t8 motor
rc8t roller
hitec 5995tg
spare parts lot
tekin 1700kv t8 motor
07-07-2009, 07:08 PM
#9
Sale pending on the servo...
07-07-2009, 11:42 PM
#10
Sale pending on the t8 motor... As well....
Only rc8t roller with 2 sets of wheels and spare parts lot left...willing to let both go for $370 shipped
Only rc8t roller with 2 sets of wheels and spare parts lot left...willing to let both go for $370 shipped
07-08-2009, 02:52 PM
#11
PM sent on T8
07-08-2009, 03:10 PM
#12
T8 sold!!!!
Only the rc8t roller with 2sets of wheels and a ton of spare parts left!!!!.....actually..still waiting on payment for the servo as well...sooo if your able to pp me the $$ thee servo will be yours
Only the rc8t roller with 2sets of wheels and a ton of spare parts left!!!!.....actually..still waiting on payment for the servo as well...sooo if your able to pp me the $$ thee servo will be yours
07-08-2009, 04:46 PM
#13
Price drop!!! Rc8t roller with 2sets of tires...$330 shipped
07-09-2009, 09:27 AM
#14
bump!!!! need this gone asap!!!
07-09-2009, 09:36 AM
#15
trade
ygpm