SELLOUT....NEED MONEY FOR A REAL CAR

Reply Subscribe

Thread Tools

Search this Thread

06-24-2009, 06:18 PM

carsrule692

Tech Fanatic

Thread Starter

iTrader: (8)

Join Date: Dec 2005

Location: New York

Posts: 993

Trader Rating: 8 (100%+)

SELLOUT....NEED MONEY FOR A REAL CAR

Xray 007- mint condition. Only ran on carpet never on the street or asphalt. Not a single scratch on the chassis. The chassis was sanded and sealed professionally. Car was just rebuilt. Shocks and diffs (rebuilt with nitride diff balls $$)rebuilt every 3 or 4 weeks. Bearing cleaned once a month. Car was only run twice a month if even. Its got the battery brace. Full stainless screw set. Car comes with a Novak GTB Brushless system setup with a 13.5 motor with 5 runs on it. The servo is a very fast ($100) KO Propo PS-2173FET. Car is balanced with weights and setup perfectly for foam carpet. Car comes with Parma magentas mounted on it and a bunch of other foams. Tires will be listed below in their own section. The car also comes with MANY spare parts. So many parts its not even funny. XRAY 112t spur and 116, 2 super hard foam bumpers, front bumper graphite brace$$$$, roll center parts, 50 wt and 30 wt shock oil. Some of the parts are open. I have only listed the parts that are NIP below.

Heres the List:
Custom made 3mm carbon fiber chassis
2 white xray springs
303361 T2 rear toe-in block 1deg left (1 pack)
302663 T2 Ball joint 5mm (1 pack)
303351 T2 rear toe in block 1 deg Right (1 pack)
302347 T2 C-hub Right 6 deg (1 pack)
303162 Rear arm Xtra Hard foam spec (4 packs)
302162 Front arms Xtra hard foam spec (3 packs)
302044 T2 Lower susp Holders (2)
307313 T2 rear hinge pin inner (2 packs)
307215 T2 front hinge pin inner (1 packs)
970050 O-rings 5x1 (1)
303134 ALU shim for lower susp holder (1)
303120 ALU shim .5mm, 1.5mm, 2.5mm (1)
307321 T2 rear arm hinge pins outer (1)
305442 Kevlar belt rear (1)
305431 Kevlar front belt (1)
901302 Hex screw SB m3x2.5 (1 pack)
303141 ALU shim 3x5x1mm (1 pack)
305240 Drive shaft replacement caps V2 (1 pack)
308070 O-ring/Shim + C clips (2 packs)
305323 T2 CVD Hudy sprin steel (1 pack this part was $20!)
901210 Pin for hex clamps (1 pack)
2 packs of complete ball bearings for the T2 '007
Enough Nitride ceramic diff balls to rebuild 4 diffs ($$$$$$$)

Car has original box and all the manuals and papers that came with it. Best buy you will ever find. Mint condition with enough parts to last a long time. The electronics are top of the line. Awesome car. Comes with 2 painted bodies. Just throw it on the track and go.
$600

CRC 3.2R- Mint condition only ran on carpet. Babied just like the xray. Diff is super smooth and was rebuilt once a month (keep in mind car was used 2 times a month at most) Car is super smooth, center shock and damper tubes are great shape. Red center spring white sides. The car has a digital Futaba S9650 wicked fast servo. Tekin FX Pro Speedo with a Putnam 27t. Car has brand new Jaco grey rear and purple fronts on her. Car comes with A LOT of tires. All the tires will be listed below in their own section.
250

Parts include:
Complete VCS shock
Lower Suspension Arms (8)
Old school front arms (6)
Aluminum Red 10 deg, Upper arms
Battery O rings
Side spring set
Upper Suspension Arms
Upper A-Arms
Aluminum Red 5 deg, upper arms
Front Braces ($25!!!!!)
Misc. Screws and parts.

This Car is very nice, mint condition. It has never given me a problem. Car comes with a painted body.

KO Propo EX-10 HELIOS- This controller is absolutely amazing. The best one out there. In great shape, backlight works. It comes with rechargeable batteries in it. It comes with 2 302FS micro reciever. Each one was 100.. It comes with original box and manuals. 200

Chargers-
I have 2 charges, 1 power supply and 1 discharge/equalizer.

-The first charger is a LRP Pulsar 2 competition. Awesome charger and discharger. For specs go to LRP website.65

-The second charger is an APS. This charger has a motor dyno built in also. Also a very good charger. It does come with the dyno/motor stand and sensor. Sold

-The power supply is a DuraComm. It puts out 25 amps of power. Never has failed or lost power. Always provides more than enough.75

- The novak smart tray discharger/equalizer. This tray is awesome for equalizing. Plugs right into the wall.35

-I have boxes and manuals for all.

TIRES-
1/10 scale-
Trued- 30 tires all different compounds

New- 16 pink and magenta

Rubber- 8 tires (Takeoffs)

1/12 Scale

Front- 52

Rear- 22

Batteries-

All batteries take a charge and still have punch in them. Some are race packs and some are practice packs. All the packs were equalized after use. The were always cycled and never over charged or overheated. Comes with 1 battery box.

6 Cell-50

4-4200

1-4600

4 Cell-50

3- 4600

2- 4200

Motors-
Motors are all powerful and built. I have several Pairs of brushes and springs as well.

I also have some extra cans and arms. All the motors still have life on them.

Stock 27t- 9 motors

19t-5 motors

I also have my cobra 2000 Pro comm lathe. The lathe cuts very precise. It has a new carbide bit on it. Very smooth action. Comes in original box. 85

Misc. Items-

These next items are just random things that every racer needs.

- Bottle of Parma bearing oil and comm. Drops

- Integy hex wrenches- .05, 1/16, 1.5, 5/64, 3/32, 2.5.

- Car stand and foam 12 scale stand

- Full bottle of Paragon

- A bunch of screws and wheel nuts.

- Pinion and Spur gears

- Duratrax intellispeed 16t speed control. Awesome speedo to carry around as a backup. With original box and manual.

- AMB TRANSPONDER with original packaging. I put Velcro on the bottom of it so you can change it from car to car. 90

- An extra servo- Futaba S3305