Jato3.3/OS18tm/EJATO/$500+ExtrasFree
04-21-2009, 04:00 PM
#1
Jato3.3/OS18tm/EJATO/$500+ExtrasFree
There is not a upgrade left to do on this nitro, I will try to list most of them.
This stadium truck was purchased in Aug 08, broken in by the book then upgraded to handle offroad. Resonator w/ a larger hpi header. RPM everything. aluminum knuckles all around. aluminum turnbuckles. aluminum draglink. aluminum brake linkage. carbon fiber brake pad. aluminum chassis. MIP CVDs. upgraded servos. GTR shocks. 2 sets of tires. Tons of replacement parts, including more aluminum.
1 gallon on the 3.3 w/ rotostart / Includes RX/TX/green
im an adult i know the drill always use after run and store piston on bottom, cleaned fuel lines before storage.
installed parts
brake cam 15
drag link 15
cvd kit 40
air filter 15
rpm 30
alum chassis 40
Alum caster 30
alum blocks 25
alum turnb 30
alum carrier 35
gtr x4 40
brake kit 10
transmission 50
($375+) in these hop-ups alone
extras
Jato Roller w/single speed conv/has reverse/servo/customer mount/hopups
OS 18TM Motor included for free
2 additional sets of brand new proline tires
You will have to replace the rear tie bar / 3 and 5 degree bars included
full gallery of photos available at the link below
http://s369.photobucket.com/albums/o.../JATO33OS18TM/
All these extras are included in the transaction free
EJATO Roller w/servo/hopups
OS 18 TM motor
3+ sets of tires
5 cell battery
Green RX/TX
extra chassis$15, fuel tank$5, shocks$5, transmission$50,
nip single speed conversion/$10, nip badland tires$25, nip force carb$40,
two brand new one way bearings$20, two new glow plugs$5, two servos$20, etc...
($350+)
$425 shipped takes everything
Feel free to ask any questions about the item
This stadium truck was purchased in Aug 08, broken in by the book then upgraded to handle offroad. Resonator w/ a larger hpi header. RPM everything. aluminum knuckles all around. aluminum turnbuckles. aluminum draglink. aluminum brake linkage. carbon fiber brake pad. aluminum chassis. MIP CVDs. upgraded servos. GTR shocks. 2 sets of tires. Tons of replacement parts, including more aluminum.
1 gallon on the 3.3 w/ rotostart / Includes RX/TX/green
im an adult i know the drill always use after run and store piston on bottom, cleaned fuel lines before storage.
installed parts
brake cam 15
drag link 15
cvd kit 40
air filter 15
rpm 30
alum chassis 40
Alum caster 30
alum blocks 25
alum turnb 30
alum carrier 35
gtr x4 40
brake kit 10
transmission 50
($375+) in these hop-ups alone
extras
Jato Roller w/single speed conv/has reverse/servo/customer mount/hopups
OS 18TM Motor included for free
2 additional sets of brand new proline tires
You will have to replace the rear tie bar / 3 and 5 degree bars included
full gallery of photos available at the link below
http://s369.photobucket.com/albums/o.../JATO33OS18TM/
All these extras are included in the transaction free
EJATO Roller w/servo/hopups
OS 18 TM motor
3+ sets of tires
5 cell battery
Green RX/TX
extra chassis$15, fuel tank$5, shocks$5, transmission$50,
nip single speed conversion/$10, nip badland tires$25, nip force carb$40,
two brand new one way bearings$20, two new glow plugs$5, two servos$20, etc...
($350+)
$425 shipped takes everything
Feel free to ask any questions about the item
04-21-2009, 05:11 PM
#2
525 shipped and ill throw in a brand new Mamba Max w/ software and cable and a Lehner 4200 basic.
the motor is not running right, it spins upon throttle but seems to restricted.
I have not opened it up, i just moved on to my new revo for the summer.
i can get some pics up if anyone is truly interested
the motor is not running right, it spins upon throttle but seems to restricted.
I have not opened it up, i just moved on to my new revo for the summer.
i can get some pics up if anyone is truly interested
04-22-2009, 12:31 PM
#3
will include a brushless slash/vxl/two lipos, 10000mah and 5500mah maxamps
slash is completely hopped up, 17mm hexs, apm arms, motor mount, towers.
big bores, str rear skid, front knuckles, aluminum rear knuckles, upgraded servo, etc...
for a loaded brushless revo with lipos
slash is completely hopped up, 17mm hexs, apm arms, motor mount, towers.
big bores, str rear skid, front knuckles, aluminum rear knuckles, upgraded servo, etc...
for a loaded brushless revo with lipos
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
