Let's try this again - will accept nitro trades
#1
Let's try this again - will accept nitro trades
Ok, didn't have much action on this so I've made a few changes.
Up for sale is my heavily modified and hopped up Jammin X1-CRT FTE
Now WITH 16mm BBs
Includes:
BCE Pro J2 Chassis & Servo tray
Dace Shock Towers
16mm Super Big Bores
KHZ Quick change engine mount w 2 set of the engine blocks
KHZ anti squat set
KHZ front plate
Light weight outdrives throughout
Has the Low CG center diff mod done and comes with 2 sets of new HB LST conical ring and pinion for the F/R diffs
Lots of spares
2 set's of 75-80% bowties M2
2 custom painted bodies
2 beater bodies
2 high downforce wings (white)
Starter box plate
Reckward Speed 2.5 clutch/ 13T clutchbell
more I'm sure that I'm forgetting............
Free extras to sweeten the deal: Spektrum Z590 and Z270 servos, Jammin JP1 pipe/header
I just went through and tore it down to bare chassis and replaced everything that was worn including bearings. I set it up from a setup that Chad Bradley gave me, it's setup for a large fast outdoor track 10/20/3 in the diffs. Fresh fluids, gaskets, o-rings, seals throughout.
Prices:
Roller + all parts/bodies/tires - anything I have truggy related - $275 shipped
Roller + all parts/bodies/tires/Mach 427 & Losi pipe - $350 shipped
Pictures:
Have lots more here: http://s255.photobucket.com/albums/h...ro%20J2%20CRT/
Up for sale is my heavily modified and hopped up Jammin X1-CRT FTE
Now WITH 16mm BBs
Includes:
BCE Pro J2 Chassis & Servo tray
Dace Shock Towers
16mm Super Big Bores
KHZ Quick change engine mount w 2 set of the engine blocks
KHZ anti squat set
KHZ front plate
Light weight outdrives throughout
Has the Low CG center diff mod done and comes with 2 sets of new HB LST conical ring and pinion for the F/R diffs
Lots of spares
2 set's of 75-80% bowties M2
2 custom painted bodies
2 beater bodies
2 high downforce wings (white)
Starter box plate
Reckward Speed 2.5 clutch/ 13T clutchbell
more I'm sure that I'm forgetting............
Free extras to sweeten the deal: Spektrum Z590 and Z270 servos, Jammin JP1 pipe/header
I just went through and tore it down to bare chassis and replaced everything that was worn including bearings. I set it up from a setup that Chad Bradley gave me, it's setup for a large fast outdoor track 10/20/3 in the diffs. Fresh fluids, gaskets, o-rings, seals throughout.
Prices:
Roller + all parts/bodies/tires - anything I have truggy related - $275 shipped
Roller + all parts/bodies/tires/Mach 427 & Losi pipe - $350 shipped
Pictures:
Have lots more here: http://s255.photobucket.com/albums/h...ro%20J2%20CRT/
Last edited by mfrosty; 02-18-2009 at 06:11 PM.
#2
I will consider partial trades for nitro related stuff
MBX5 parts
RC8 Parts
AKA Buggy tires/wheels - Crossbrace & I-Beams only
Personal Transponders - need 2
NIB GoTech 7 port
Spektrum SR3500 rx
RTR Slash is the only electric I will consider (has to be stock for spec class)
LMK what you have
Thanks!
MBX5 parts
RC8 Parts
AKA Buggy tires/wheels - Crossbrace & I-Beams only
Personal Transponders - need 2
NIB GoTech 7 port
Spektrum SR3500 rx
RTR Slash is the only electric I will consider (has to be stock for spec class)
LMK what you have
Thanks!
Last edited by mfrosty; 02-18-2009 at 05:13 AM.
#5
Tech Apprentice
I'm still interested.
Like I said before, don't hold anything for me, but I'm slowly coming around to some money.
I'll keep ya updated, good luck if it sells before me!
bump for a GREAT deal!!!!
Like I said before, don't hold anything for me, but I'm slowly coming around to some money.
I'll keep ya updated, good luck if it sells before me!
bump for a GREAT deal!!!!
#6
Tech Adept
iTrader: (20)
Well, if we can sell my son's modded out Revo in a fair amount of time, we'll get back to you. Can you send me some better pics of what's in the part trays to [email protected]?
Thanks,
Curt
Thanks,
Curt
#7
Well, if we can sell my son's modded out Revo in a fair amount of time, we'll get back to you. Can you send me some better pics of what's in the part trays to [email protected]?
Thanks,
Curt
Thanks,
Curt
I think that covers it
The 427 has TONS of pinch left, and also has the bump box back plate (rotostart back plate included too)