**** Kyohso Mini Inferno Buggy/ST Race Package ****
#1
**** Kyohso Mini Inferno Buggy/ST Race Package ****
Mini Inferno KMRC Racer for sale. If you are looking for the ultimate Mini Inferno racer then this one is for you. This is a no compromise race setup, no bling all business. Currently setup as a buggy with ST arms and axles to give it the widest track width and best handling. The package will include arms, axles shock towers, bodies, etc to make eitehr a buggy or an ST. Comes with NIB servo, esc and motor throw in your receiver and blow away the competition.
The chassis:
KM RC (KM Concept) chassis which is regarded as the best chassis for the MI, it uses a 1/10 slipper to eliminate the original Kyosho center diff, C/F chassis was sanded and glued. I do have to mention that the front suspension plate was cracked in a crash, I have glued it and so far so good, but a new one should probably be purchased. On the chassis is ATM titanium shock towers (F+R), 3 racing aluminum front C hubs, knuckles, ATM titanium king pins and rear hubs. ATOMIC (atm) II front and rear ball diffs (rear with steel ring gear) these are the best diffs for the MI as well as titanium front drive shaft. Titanium hinge pins throughout, aluminum or carbon fibre and titanium hinge pin holders everywhere too. Kyosho wide track axles, to allow the use of 1/10 wheels, these are much stronger than the X speed axles. 3 Racing sway bars and threaded shocks.
Electronics:
Castle Mamba Micro Pro ESC with Castle Link (only about 4 months old)
Neu 1106/2.5y (the best brushless motors on the market)
4 Zippy 2s 800mah lipos with custom parallel wiring for saddle configuration for 1600mah
Hitec HS-82MG digital servo with modified Vendetta hold down and XRAY mirco servo saver.
Extras:
Sway bars, springs, arms, axles, hubs, brand new Kyosho wide track axles, bearings, screws, wings, shocks, etc too much to list.
See pictures for more details.
Asking $275 for everything shipped (I have that into chassis, esc and motor alone).
PM me if interested.
The chassis:
KM RC (KM Concept) chassis which is regarded as the best chassis for the MI, it uses a 1/10 slipper to eliminate the original Kyosho center diff, C/F chassis was sanded and glued. I do have to mention that the front suspension plate was cracked in a crash, I have glued it and so far so good, but a new one should probably be purchased. On the chassis is ATM titanium shock towers (F+R), 3 racing aluminum front C hubs, knuckles, ATM titanium king pins and rear hubs. ATOMIC (atm) II front and rear ball diffs (rear with steel ring gear) these are the best diffs for the MI as well as titanium front drive shaft. Titanium hinge pins throughout, aluminum or carbon fibre and titanium hinge pin holders everywhere too. Kyosho wide track axles, to allow the use of 1/10 wheels, these are much stronger than the X speed axles. 3 Racing sway bars and threaded shocks.
Electronics:
Castle Mamba Micro Pro ESC with Castle Link (only about 4 months old)
Neu 1106/2.5y (the best brushless motors on the market)
4 Zippy 2s 800mah lipos with custom parallel wiring for saddle configuration for 1600mah
Hitec HS-82MG digital servo with modified Vendetta hold down and XRAY mirco servo saver.
Extras:
Sway bars, springs, arms, axles, hubs, brand new Kyosho wide track axles, bearings, screws, wings, shocks, etc too much to list.
See pictures for more details.
Asking $275 for everything shipped (I have that into chassis, esc and motor alone).
PM me if interested.
Last edited by FastXR; 02-04-2009 at 04:18 PM. Reason: price drop
#2
#3
morning bump!
#4
#5
bumpity bump
#7
Thanks, I put a lot of work into it!
Someone must want this, come on guys if you are looking for a mini racer, they don't get much better than this.
Someone must want this, come on guys if you are looking for a mini racer, they don't get much better than this.
#8
#9
Price is now 275 shipped any takers?
#12
#13
#14
Nighttime bump
#15