Spashett Edition Recoil
01-31-2009, 03:35 PM
#1
Spashett Edition Recoil
SOLD SOLD SOLD
Car and all with it has been sold, Thanks for looking
Key Features
ARR Pro Race Edition loaded with upgrades
Graphite chassis & upper deck for increased strength and performance
Ball differentials front and rear improve power delivery for smooth acceleration out of the corners.
Blue anodized slide motor mount/brace for easy gear adjustments and added strength and cooling
CV's reduce drag and improve performance
Anodized turnbuckles for easy camber and toe adjustments
Blue aluminum shock bodies for ultra smooth performance and improved handling
Clear pre-cut Mazda 6 body
Below are some of the Specs on the car
Type:4WD assembled electric race chassis
Scale:1/14
Length:11.5" (292mm)
Width:5.25" (133mm)
Wheelbase:7.375" (187mm)
Weight:16.3 oz (426 g)
Chassis:2mm graphite composite
Suspension:Independent
Drive Train:Shaft drive with ball diffs and adjustable slipper
Tire Type:Rubber street tread
Kit/RTR:ARR Almost Ready to Run
Ball Bearings:Complete
Gender:Unisex
Minimum Age Recommendation:14 years
Experience Level:Advanced
Assembly Time:1-3 Hours
Is Assembly Required:Yes (Not Now, it is built, and ready to run or race)
Pics to follow
Car and all with it has been sold, Thanks for looking
This is a Super nice car but am changing classes for this season
It has a Novak Mongoose Pro Brushless 8.5 (9000kv) motor with only 2 races on it
If you know about mini or Micro cars, most have a 20mm can motor size, this is the STRONG Sensored Brushless which
is a 26mm can and I had a drive cup custom machined so the motor won't hit.
Also it has a LONG hardened 12 tooth pinion on it and a new 13 also
JR. Digital DS287MG Servo, (Fast and strong)
Set of used 35 and 40 foam slicks and stock tires.
Car is complete with all extra that came with it
Pictures of the body were when it was new, has had 3 or 4 races since then, but still in good shape
Just add your radio gear.
Asking $230
It has a Novak Mongoose Pro Brushless 8.5 (9000kv) motor with only 2 races on it
If you know about mini or Micro cars, most have a 20mm can motor size, this is the STRONG Sensored Brushless which
is a 26mm can and I had a drive cup custom machined so the motor won't hit.
Also it has a LONG hardened 12 tooth pinion on it and a new 13 also
JR. Digital DS287MG Servo, (Fast and strong)
Set of used 35 and 40 foam slicks and stock tires.
Car is complete with all extra that came with it
Pictures of the body were when it was new, has had 3 or 4 races since then, but still in good shape
Just add your radio gear.
Asking $230
Key Features
ARR Pro Race Edition loaded with upgrades
Graphite chassis & upper deck for increased strength and performance
Ball differentials front and rear improve power delivery for smooth acceleration out of the corners.
Blue anodized slide motor mount/brace for easy gear adjustments and added strength and cooling
CV's reduce drag and improve performance
Anodized turnbuckles for easy camber and toe adjustments
Blue aluminum shock bodies for ultra smooth performance and improved handling
Clear pre-cut Mazda 6 body
Below are some of the Specs on the car
Type:4WD assembled electric race chassis
Scale:1/14
Length:11.5" (292mm)
Width:5.25" (133mm)
Wheelbase:7.375" (187mm)
Weight:16.3 oz (426 g)
Chassis:2mm graphite composite
Suspension:Independent
Drive Train:Shaft drive with ball diffs and adjustable slipper
Tire Type:Rubber street tread
Kit/RTR:ARR Almost Ready to Run
Ball Bearings:Complete
Gender:Unisex
Minimum Age Recommendation:14 years
Experience Level:Advanced
Assembly Time:1-3 Hours
Is Assembly Required:Yes (Not Now, it is built, and ready to run or race)
Pics to follow
Last edited by jfischer; 02-04-2009 at 02:37 AM.
01-31-2009, 03:42 PM
#3
Pics of the car
Below are some pics of the body (when new, has about 3 or 4 races now) and the chassis with Motor and setup on it. I Think they are the 35 shore tires on it now and have some 40 shore, and the new set of tires that came on it.
02-02-2009, 12:58 PM
#4
Parting car out
It is a bit early for this, but I have had questions wanting to know if I would part the car out.
With this being said, I would let the Motor (of which has only 2 races on it) go first, and then go from there. Motor is a heck of a nice FAST motor.
Drop me a note if you might be interested
With this being said, I would let the Motor (of which has only 2 races on it) go first, and then go from there. Motor is a heck of a nice FAST motor.
Drop me a note if you might be interested
02-03-2009, 06:42 AM
#5
Sent you a PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
