TurboMatcher 4/35
#1
TurboMatcher 4/35
I have way to much stuff so I am going to start thinning things down a bit.
TWO used but in great shape
CE TurboMatcher 4/35's $220.00 each shipped & insured
FEATURES: Reads down to 0.001V (example, 1.165)
Milliwatt hours standard- shows total power of cell by combining
amps, time, and volts
Shows both relative and actual internal resistance
35 amp maximum discharge
Put your own name on label- stores name in memory
Turboflex charging selectable- reduces cell venting and lowers
impedence (resistance)
Peak detect voltage setting selectable - 0.01 to 0.09V
Stores up to 3 different setups- automatically uses last set-up
used upon powering up (turning ON)
Relative internal resistance- standard
mAh standard- shows standard rating of cell (example, 2000)
Printer port standard (DB-25) for printing labels, graphs and outputs
computer data for OPTIONAL label program, can also connect to
a computer with a parallel to serial converter
Manual/automatic selectable for label printing (Printer should
be a dot matrix Centronics parallel compatible type)
Built-in cooling fan in back
Built-in steel fold-away stand
Eight simple to use 8 keypad push button controls
32 character display
INCLUDES: One Turbomatcher 4-35 with 4 single-cell battery holders and
alligator clip input leads
SPECS: Charge rate: 2-7 amps
Discharge rate: 15-35 amps
Input power: 13.8V and 7 or more amps
Cells: 1-4 Sub-C size
Data screens:
Cell status, supply volts/amps, individual cell data,
discharge amps, discharge end volts, peak volts,
flex level ON/OFF, discharge end time, milliamp hour
and milliwatt hour and relative internal resistance,
sound horn, store/recall set-ups
REQUIRES: 13.8 volt DC power with at least 7 amps
To print labels: a parallel printer
I will send Pics as wanted or needed
TWO used but in great shape
CE TurboMatcher 4/35's $220.00 each shipped & insured
FEATURES: Reads down to 0.001V (example, 1.165)
Milliwatt hours standard- shows total power of cell by combining
amps, time, and volts
Shows both relative and actual internal resistance
35 amp maximum discharge
Put your own name on label- stores name in memory
Turboflex charging selectable- reduces cell venting and lowers
impedence (resistance)
Peak detect voltage setting selectable - 0.01 to 0.09V
Stores up to 3 different setups- automatically uses last set-up
used upon powering up (turning ON)
Relative internal resistance- standard
mAh standard- shows standard rating of cell (example, 2000)
Printer port standard (DB-25) for printing labels, graphs and outputs
computer data for OPTIONAL label program, can also connect to
a computer with a parallel to serial converter
Manual/automatic selectable for label printing (Printer should
be a dot matrix Centronics parallel compatible type)
Built-in cooling fan in back
Built-in steel fold-away stand
Eight simple to use 8 keypad push button controls
32 character display
INCLUDES: One Turbomatcher 4-35 with 4 single-cell battery holders and
alligator clip input leads
SPECS: Charge rate: 2-7 amps
Discharge rate: 15-35 amps
Input power: 13.8V and 7 or more amps
Cells: 1-4 Sub-C size
Data screens:
Cell status, supply volts/amps, individual cell data,
discharge amps, discharge end volts, peak volts,
flex level ON/OFF, discharge end time, milliamp hour
and milliwatt hour and relative internal resistance,
sound horn, store/recall set-ups
REQUIRES: 13.8 volt DC power with at least 7 amps
To print labels: a parallel printer
I will send Pics as wanted or needed
Last edited by Skruger; 11-26-2008 at 10:21 AM.