Novak Velociti 3.5R Brushless Motor Race-Tuned TC5
#1
Novak Velociti 3.5R Brushless Motor Race-Tuned TC5
Had this in my TC5 but this class is way too fast for me so I'm switching to the 13.5 class. Only raced once like new, $50 shipped in the US
This is the Novak Velociti 3.5R Sensored Brushless Racing Motor.
FEATURES: Specifically designed for R/C vehicles, provides approximately 20%
longer run-times than Brushed motors and accepts all existing
pinion gears
For use with Novak Brushless speed controls and up to 6 cells
(1.2VDC/cell) NOTE: Not for use with the Novak Super Sport and
Super Sport + Electronic Speed Controls
Nickel-plated sintered Neodymium rotor insures increased magnetic
strength, improved braking and acceleration, higher efficiency and
lower current draw
Sensor based for excellent braking and low-speed driveability
Lightweight aluminum end bells reduce weight and serve as a heat sink
Standard 540 can size-same dimensions as the Novak Velocity 4.5R,
5.5R, 6.5R and 7.5R
Factory hand-wound and dyno tuned
Improved solder tab system with new lower-resistant connectors are
more efficient and easy to use and allow for more flexible
soldering options
Increased strength Neodymium magnets for improved performance
Oversized front bearing for increased load handling and bearing life
Lowest possible copper loss (3.1 milli-ohm phase to phase resistance)
120 day limited warranty
INCLUDES: Novak Velociti 3.5R Sensored Brushless Racing Motor with connector
REQUIRES: Installing in vehicle and connecting to speed control
SPECS: Number of Turns: 3.5
Input Voltage: 4-6 cells (1.2 volts/cell)
Watts: 490
KV (unloaded) 10,500 RPM/Volt
Motor Size: 540 size, Length, 2.08" (52.8mm) x Diameter, 1.41"
(35.8mm)
Shaft Diameter: 0.125" (3.2mm)
Weight: 6.61oz (187g)
Magnet: Nickel-plated sinteed high strength Neodymium
Bearing Size: 1/2" X 3/16" (12.7 x 4.8mm)
This is the Novak Velociti 3.5R Sensored Brushless Racing Motor.
FEATURES: Specifically designed for R/C vehicles, provides approximately 20%
longer run-times than Brushed motors and accepts all existing
pinion gears
For use with Novak Brushless speed controls and up to 6 cells
(1.2VDC/cell) NOTE: Not for use with the Novak Super Sport and
Super Sport + Electronic Speed Controls
Nickel-plated sintered Neodymium rotor insures increased magnetic
strength, improved braking and acceleration, higher efficiency and
lower current draw
Sensor based for excellent braking and low-speed driveability
Lightweight aluminum end bells reduce weight and serve as a heat sink
Standard 540 can size-same dimensions as the Novak Velocity 4.5R,
5.5R, 6.5R and 7.5R
Factory hand-wound and dyno tuned
Improved solder tab system with new lower-resistant connectors are
more efficient and easy to use and allow for more flexible
soldering options
Increased strength Neodymium magnets for improved performance
Oversized front bearing for increased load handling and bearing life
Lowest possible copper loss (3.1 milli-ohm phase to phase resistance)
120 day limited warranty
INCLUDES: Novak Velociti 3.5R Sensored Brushless Racing Motor with connector
REQUIRES: Installing in vehicle and connecting to speed control
SPECS: Number of Turns: 3.5
Input Voltage: 4-6 cells (1.2 volts/cell)
Watts: 490
KV (unloaded) 10,500 RPM/Volt
Motor Size: 540 size, Length, 2.08" (52.8mm) x Diameter, 1.41"
(35.8mm)
Shaft Diameter: 0.125" (3.2mm)
Weight: 6.61oz (187g)
Magnet: Nickel-plated sinteed high strength Neodymium
Bearing Size: 1/2" X 3/16" (12.7 x 4.8mm)