DURATRAX ICE CHARGER $85 OBO
#1
DURATRAX ICE CHARGER $85 OBO
I have an ICE charger here for sale for $85 shipped. It's been used for 1 race season and in excellent condition. Has a carbon fiber face plate put over the original decals. Comes with a 2ft charging cord with a male deans connector. Comes with box and manual. This charger charges NICAD,NIHM, and LIPOS. It discharges at up to 10amps. Get it before it's gone . TAKE PAYPAL ONLY. SHIPPED ONLY IN THE CONTINENTAL US. Will be shipped USPS with delivery confirmation. # will be sent to you for tracking.
FEATURES: Handles 1-10 NiCd or NiMH cells, and 1-4 Lithium Ion (Li-Ion) or
Lithium Polymer (LiPo) cells
Wide adjustable current ranges for Fast Charge (.1A-8A) and
Discharge (.1A-10A) are ideal for electric cars, trucks and boats
Four Charge modes: Linear, Reflex, Impulse, and 4-step*
* The optional battery temperature monitor is required for 4-step
Charge feature (DTXP4171)
"Constant Current/Constant Voltage" Charge method for Li-Ion/LiPo
batteries
Reverse Polarity Protection
Peak Detection with adjustable sensitivity for NiCd & NiMH batteries
0-500mA adjustable TRICKLE Charge current for NiCd and NiMH
.8V-1.1V adjustable Discharge cut-off voltage for NiCd and NiMH
2.5V-3.7V adjustable Discharge cut-off voltage for Li-Ion/LiPo
Performs 1-10 cycles (NiCd and NiMH only)-retrieves data for 10 full
cycles
Stores info for up to 10 batteries in memory by custom names for easy
recall and charger set-up
LCD screen shows 8 lines of data and 21 characters per line
1-8V adjustable output, time adjustable from 1-120 minutes and
10A Constant Current (30A surge) for motor break-in
Also breaks-in electric motors and operates commutator lathes
FEATURES: Handles 1-10 NiCd or NiMH cells, and 1-4 Lithium Ion (Li-Ion) or
Lithium Polymer (LiPo) cells
Wide adjustable current ranges for Fast Charge (.1A-8A) and
Discharge (.1A-10A) are ideal for electric cars, trucks and boats
Four Charge modes: Linear, Reflex, Impulse, and 4-step*
* The optional battery temperature monitor is required for 4-step
Charge feature (DTXP4171)
"Constant Current/Constant Voltage" Charge method for Li-Ion/LiPo
batteries
Reverse Polarity Protection
Peak Detection with adjustable sensitivity for NiCd & NiMH batteries
0-500mA adjustable TRICKLE Charge current for NiCd and NiMH
.8V-1.1V adjustable Discharge cut-off voltage for NiCd and NiMH
2.5V-3.7V adjustable Discharge cut-off voltage for Li-Ion/LiPo
Performs 1-10 cycles (NiCd and NiMH only)-retrieves data for 10 full
cycles
Stores info for up to 10 batteries in memory by custom names for easy
recall and charger set-up
LCD screen shows 8 lines of data and 21 characters per line
1-8V adjustable output, time adjustable from 1-120 minutes and
10A Constant Current (30A surge) for motor break-in
Also breaks-in electric motors and operates commutator lathes
Last edited by BIG DADDY8; 11-03-2008 at 03:29 PM.