R/C Tech Forums - Fall Garage Sale...all quality gear FS!

Rc Fans I am, yet again, thinning out the herd and creating some breathing room in the workshop. Here is what I have and it is priced to sale the condition will be good to excellent:

All items in red are SOLD!

1/8 Rollers:
- Xray EC with truggy gear conversion and Fioroni Ergal Front Hubs, plus a whole bin of extra parts. Everything from arms to hinge pins to radio trays and diffs. plus extra cvds. I have actually never broken anything on it so all the parts are new out of the packaging, a few are still in the packaging. I am asking $195.00 plus a split on the shipping as it will be costly given the weight. SOLD

http://i159.photobucket.com/albums/t...0/DSC01387.jpg
http://i159.photobucket.com/albums/t...0/DSC01390.jpg
http://i159.photobucket.com/albums/t...0/DSC01391.jpg
http://i159.photobucket.com/albums/t...0/DSC01388.jpg

- NIB Kiefer designs EC custom lid - $50.00 shipped SOLD

http://i159.photobucket.com/albums/t...0/DSC01387.jpg

- Xray Xt8 with KH front Hubs and 5mm hexes for running 0 offset rims. Xray Aluminum rear hubs, plus a whole parts bin of extra parts. Kiefer designs custom body, Xray 1 piece motor motor for Werks/Novarossi based mills. This truggy handles extremely well. Also, has a New out of package chassis. The list:

- King Headz Hubs
- King Headz 5 mm ext. hexes so you can run both 0 and 1/2 offset wheels
- Rear Xray Al. chassis brace
- Xray one piece motor mount
- Aluminum Xray rear hubs
- Avid bearings at all four corners and fresh Xray bearings throughout the diffs.
- 2.2/2.6 mm sway bars installed
- Jammin Big Bores with three sets of springs
- Whole bunch of spares

I am asking $350.00 plus a split on shipping as again it will be costly

- NIB Kiefer Designs Xt8 custom lid - $55.00 shipped SOLD

1/10 Roller:
GT2 FT with OS 12TZ that has never seen the dirt. Bought this thinking I was going to run gas truck and guess what, it never developed in my area so she's been sitting on the shelf since I started breaking in the motor, which will need to be completed when you buy it. Has a few spares, namely the arms as I replaced them with RPM's HD arms. Has New out of bag body. I can include an ofna starter box for an extra $45.00 including the gel cell. The box was purchased for this truck. For an extra $125.00 it will come with Futaba digital servos, S9550 and S9451

I am asking $265.00 plus a split on shipping - SOLD

http://i159.photobucket.com/albums/t...0/DSC01738.jpg

http://i159.photobucket.com/albums/t...0/DSC01739.jpg

http://i159.photobucket.com/albums/t...0/DSC01740.jpg

http://i159.photobucket.com/albums/t...0/DSC01741.jpg

http://i159.photobucket.com/albums/t...0/DSC01742.jpg

http://i159.photobucket.com/albums/t...0/DSC01743.jpg

http://i159.photobucket.com/albums/t...0/DSC01744.jpg

http://i159.photobucket.com/albums/t...0/DSC01745.jpg

http://i159.photobucket.com/albums/t...0/DSC01746.jpg

http://i159.photobucket.com/albums/t...0/DSC01747.jpg

http://i159.photobucket.com/albums/t...0/DSC01748.jpg

http://i159.photobucket.com/albums/t...0/DSC01749.jpg

CRT.5 with an OS 18TZ. Has a ton of extra's. Check out the following pics. 3300 mah venom stick pack in the starter box. Comes ready to run minus the Rx.

http://i159.photobucket.com/albums/t...0/DSC01750.jpg
http://i159.photobucket.com/albums/t...0/DSC01751.jpg
http://i159.photobucket.com/albums/t...0/DSC01752.jpg
http://i159.photobucket.com/albums/t...0/DSC01753.jpg
http://i159.photobucket.com/albums/t...0/DSC01754.jpg
http://i159.photobucket.com/albums/t...0/DSC01755.jpg
http://i159.photobucket.com/albums/t...0/DSC01756.jpg
http://i159.photobucket.com/albums/t...0/DSC01757.jpg
http://i159.photobucket.com/albums/t...0/DSC01758.jpg
http://i159.photobucket.com/albums/t...0/DSC01759.jpg
http://i159.photobucket.com/albums/t...0/DSC01760.jpg
http://i159.photobucket.com/albums/t...0/DSC01761.jpg
http://i159.photobucket.com/albums/t...0/DSC01762.jpg
http://i159.photobucket.com/albums/t...0/DSC01763.jpg
http://i159.photobucket.com/albums/t...0/DSC01764.jpg

I am asking $225.00 plus a split on shipping - SOLD

Starter Boxes:
Mugen starter box - the older purple one. This box works perfectly and will come with a new wheel as the current wheel is showing signs of wear. The box has the usual scratches but never abused. It will come with two 3800 mah stick packs, all wired with deans connectors.

I am asking $45.00 plus a split on shipping - SOLD

Mugen BII Starter Box - this is the new Grey box and is in great condition and works flawlessly. Again, it show the usual wear signs but otherwise it's perfect. It to will come with twin 3800 mah stick packs installed, all wired with deans connectors.

I am asking $55.00 plus a split on shipping - SOLD

NIB dynamite quick fire starter box with twin 3800 mah stick packs with deans connectors - $65.00 shipped

http://i159.photobucket.com/albums/t...0/DSC02046.jpg
http://i159.photobucket.com/albums/t...0/DSC02051.jpg

Servos:
Hitec 645 MG - case is a bit muffed up from the servo horn but otherwise it functions perfectly - $15.00 shipped SOLD
Spektrum z590 - used only a handful of times, works flawlessly - $15.00 shipped - SOLD

http://i159.photobucket.com/albums/t...0/DSC02052.jpg
http://i159.photobucket.com/albums/t...0/DSC02053.jpg

Futaba S9550 in excellent condition - I used this in my TC briefly before selling it. It works flawlessly and is a great servo for TC or 1/10 Scale truck - $55.00 shipped - SOLD pending payment
Futaba S9451 in excellent condition - I used this in my TC briefly before selling it. Works flawlessly and is in excellent condition. - $55.00 shipped

http://i159.photobucket.com/albums/t...0/DSC02063.jpg
http://i159.photobucket.com/albums/t...0/DSC02064.jpg
http://i159.photobucket.com/albums/t...0/DSC02065.jpg
http://i159.photobucket.com/albums/t...0/DSC02066.jpg
http://i159.photobucket.com/albums/t...0/DSC02067.jpg

Pipes:
JP-5 NIB - $60.00 shipped

http://i159.photobucket.com/albums/t...0/DSC02062.jpg

Engines:
NIB 21-5KT plus extras:
§ Novarossi Plus 21-5K Off-Road 5 port Competition Buggy Engine (Standard Plug) [FMSPLUS21-5K]
§ Novarossi Conrod Extra Strong/Light Weight R7 (fits P5X/421BX/Plus 21-5)
[FMS07009]
§ Novarossi .21 Wrist Pin (1 pc)
[FMS04000]
§ Novarossi .21 Wrist Pin Clips (4pc)
[FMS05000]
§ TKO Ceramic 14.5x26x6mm Rear Engine Bearing (Novarossi Plus 21-5/21-7) (2)
[TKO-CB-MR26145]
§ TKO Ceramic 7x19x6mm Front Engine Bearing (O.S., Novarossi, RB) (1)
[TKO-CB-607C-2RS]
§ Novarossi .21 Competition Turbo Button Head (P5/P5X/Plus 21-5)
[FMS28002] Low Price:
§ Powerhouse Mods: Turbo Performance Mod Package:
This package is designed for the serious racer who wants the ultimate advantage in power and performance. This package has everything; smooth, broad, linear powerbands, great fuel economy, lower overall running temperatures, specialized intake and exhaust port modifications based on application, with the added benefit of continual power spooling performance that is similar to today’s high performance turbine engines. A turbo crankshaft gives you quicker throttle response with smooth controllable power, a mid range that will pull hard but not overpower the track surface and most importantly, it will give you that increase in peak rpm and horsepower that will continue to spool until you let off giving you the ultimate in top end speed. http://powerhousercperformance.com/pricing.php

$375.00 shipped in the US - pics. will be posted shortly

Engine parts:
B-mods after market 4 bolt pattern (Novarossi) cooling head New - $55.00 shipped

http://i159.photobucket.com/albums/t...0/DSC02054.jpg
http://i159.photobucket.com/albums/t...0/DSC02055.jpg

Bodies:
NIB JConcepts Illuzion Losi 8B body - $22.50 shipped - SOLD

http://i159.photobucket.com/albums/t...0/DSC02056.jpg
http://i159.photobucket.com/albums/t...0/DSC02057.jpg

Airbrush:
Iwata Eclipse airbrush/hose/resorvoir - this was used only a few times. The packaging is in rough shape as I had a paint container rupture and it got all over the packaging. Brush works perfectly and provides great results - $55.00 shipped SOLD

http://i159.photobucket.com/albums/t...0/DSC02058.jpg
http://i159.photobucket.com/albums/t...0/DSC02059.jpg
http://i159.photobucket.com/albums/t...0/DSC02060.jpg

1/10 TC:

HPI RTR, just need to drop in your Rx/battery pack and your good to go. This roller will come with:
HPI Nitro RS4 3
O.S CV-R 18 with less than 1.5 gallons
O.S. Speed Pipe
3 sets of tires:
2 sets of HPI with molded foams
1 set of foam tires
1 BMW unpainted body
1 set of Purple gears (red gears installed)
Upgraded Parts:
MPI CVD’s
HPI Super Chassis Nitro 3
FEATURES:
Purple anodized aluminum.
Longer engine mounting slots.
3mm thick.
Machined chassis for reduced weight.
Slender design.

I am asking $275.00 shipped

http://i468.photobucket.com/albums/r...4/DSC02176.jpg

http://i468.photobucket.com/albums/r...4/DSC02175.jpg

http://i468.photobucket.com/albums/r...4/DSC02174.jpg

http://i468.photobucket.com/albums/r...4/DSC02173.jpg

http://i468.photobucket.com/albums/r...4/DSC02172.jpg

http://i468.photobucket.com/albums/r...4/DSC02171.jpg

http://i468.photobucket.com/albums/r...4/DSC02170.jpg

http://i468.photobucket.com/albums/r...4/DSC02169.jpg

- SOLD

Pipes:

OS 2050 - this is the older version of the 2050 with out the welded nipple. Pipe is in excellent condition, but does have JB weld around the pressure nipple to ensure strong seal. I will have pics. up shortly. - $55.00 shipped in the US SOLD

I will have more items to list later as well as posting pics. For those that are interested please pm me with what you would like to see and I will get you pics. first before posting in the thread.

Check my feedback if you have any questions about the legitimacy of this post. The only way I will ship overseas is if the buyer will pay actual shipping costs and is aware of the potential delays surrounding customs.

Thank you all for taking the time to look....now get out and vote!