Exiting on-road racing...TA05R for sale (TCS Racing ready)
10-03-2008, 01:58 PM
#1
Exiting on-road racing...TA05R for sale (TCS Racing ready)
Hi Guys,
Going to take a long break from on-road for awhile. Those of you that knows me know that I take good care of my stuff, so looking for a good home for my TA05R. This car has put me in the A-main two times at the TCS Nationals (GT-2 and GT-1) so the setup on the car works great at the Tamiya track. A bunch of extra parts will be included as well, here's the long list:
Bodies:
Tamiya NSX Body (Painted, the one I ran at TCS Nats)
Tamiya Lexus Body (Painted, and only ran a few laps, good for GT-3)
Mazda 6 body (painted and used)
Mazda 6 body (clear)
9 sets of 1 run Tamiya B3 tires
1 set of Tamiya A tires (unmounted)
On the car:
Alum. Motor Mount (which does not come with the "R" spec)
Alum. shocks
Alum. Rear universal bone
Alum. Steering bellcrank
Graphite Bellcrank Plate
Ceramic Bearings installed (these are about $90 a set new)
New belts front and rear on the car
Parts that are still in package:
51107 x1 4 deg. caster blocks
51092 x1 46mm steel universal bone
51103 x3 Front Steering knuckles
53724 x1 46mm Alum. universal bone
53867 x2 Front one-way pulley
51212 x1 Rear diff pulley
53124 x1 carbide diff balls
53847 x1 46mm complete universals
53500 x1 Universal cross joints
53891 x1 bearing spacers
51242 x1 bumper/body posts set
51104 x1 A-Arm set
51100 x1 Flanged tube for caster block
49414 x1 limited edition sway bar kit
53933 x1 Alum. Spacers kit
extra parts:
Complete set of shock springs
Center one-way, Front one-way
Extra Belts, Extra Diffs, Extra Bearings, Extra suspension blocks
$285 shipped anywhere in the US. PayPal Payment accepted. PM if interested. Not looking for any trades. Thanks guys!
Steve Wang
Going to take a long break from on-road for awhile. Those of you that knows me know that I take good care of my stuff, so looking for a good home for my TA05R. This car has put me in the A-main two times at the TCS Nationals (GT-2 and GT-1) so the setup on the car works great at the Tamiya track. A bunch of extra parts will be included as well, here's the long list:
Bodies:
Tamiya NSX Body (Painted, the one I ran at TCS Nats)
Tamiya Lexus Body (Painted, and only ran a few laps, good for GT-3)
Mazda 6 body (painted and used)
Mazda 6 body (clear)
9 sets of 1 run Tamiya B3 tires
1 set of Tamiya A tires (unmounted)
On the car:
Alum. Motor Mount (which does not come with the "R" spec)
Alum. shocks
Alum. Rear universal bone
Alum. Steering bellcrank
Graphite Bellcrank Plate
Ceramic Bearings installed (these are about $90 a set new)
New belts front and rear on the car
Parts that are still in package:
51107 x1 4 deg. caster blocks
51092 x1 46mm steel universal bone
51103 x3 Front Steering knuckles
53724 x1 46mm Alum. universal bone
53867 x2 Front one-way pulley
51212 x1 Rear diff pulley
53124 x1 carbide diff balls
53847 x1 46mm complete universals
53500 x1 Universal cross joints
53891 x1 bearing spacers
51242 x1 bumper/body posts set
51104 x1 A-Arm set
51100 x1 Flanged tube for caster block
49414 x1 limited edition sway bar kit
53933 x1 Alum. Spacers kit
extra parts:
Complete set of shock springs
Center one-way, Front one-way
Extra Belts, Extra Diffs, Extra Bearings, Extra suspension blocks
$285 shipped anywhere in the US. PayPal Payment accepted. PM if interested. Not looking for any trades. Thanks guys!
Steve Wang
10-05-2008, 09:39 AM
#3
10-05-2008, 02:28 PM
#4
Pictures of the car, bodies, parts, and tires
Steve
Steve
10-06-2008, 05:32 PM
#5
PM Answered, the car is still available. This is a ready to go setup for serious TCS racer 
Steve
Steve
10-10-2008, 08:31 PM
#6
Last bump before I decide just to keep this for an odd chance that I might race on-road again in the future 
10-20-2008, 08:38 AM
#7
Hi Guys,
New lower price, $255 Takes all (UPS Ground Shipping included)
Steve
New lower price, $255 Takes all (UPS Ground Shipping included)
Steve
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
