Brushless Jammin CRT, MM, Lipos, motors, SR3500 FS

Reply Subscribe

Thread Tools

Search this Thread

09-28-2008, 04:08 PM

pb4ugo

Tech Regular

Thread Starter

iTrader: (22)

Join Date: Jun 2008

Posts: 330

Trader Rating: 22 (100%+)

Brushless Jammin CRT, MM, Lipos, motors, SR3500 FS

I think I'm quitting brushless for now. Selling a bunch of stuff. Here is the first round. All prices are shipped in the ConUS obo. Ebay ID is Red_Rock_RC if you want more feedback.

First is a Jammin CRT pro roller with RC-Monster mount, 16mm SBB, and a few spares. Original shocks are included also as well as extra pack of arms and c-hubs. Has Kyosho 46t spur on it, and two extra 44t spurs as well as the factory spur included. The nitro gear isn't included in case you wanted to return to nitro. I never finished painting the body because I got some bleeding through my first mask step. Overspray film is still on the outside and it still has not been trimmed. Tires are still good for bashing, a little worn for the race track. Probably only about 30 runs on it. $225

Next are a FDM 14 XL (1191 Kv) and 6 XL (2779 Kv). $65 each.

Here are a Spektrum SR3500 (only 5 runs, $SOLD), a MM/4600 combo($SOLD), a MM controller only($SOLD), a NIP CC BEC($SOLD), a NIP Castlelink($15), a Tekin R1 Pro (only 5 runs, $140), and Tekin Hotwire($SOLD). The CC controller only has a tiny melted through spot on the case under the power wires from hitting it with a soldering iron. It also doesn't have the USB cable. The combo does have the cable, and they both have the CD. Both have the broken tab on the switch that happens all the time.

Lipos: Two packs of Maxamps 4s 4200 20c rated packs with 15 runs on them($SOLD). Since these are only 100mm long, I used them in parallel to each side of the rear CVD on the CRT. I also have four packs of the Elite 30c 5300 5s packs ($140 each). These are awesome packs with 10 runs or under. The boat guys think these cells are as good as or better than the other premium cells out there. These are longer than the norm, so I ran one down the side of the CRT with the motor to the back. Packs 1 & 2 have the Castle bullets on them, packs 3 & 4 have 5.5mm bullets on them.