twin with Brushless turnigy 4L 2700kv and Mamba Max esc, real beater body,
has arm brases
Servo mod to front axel with 2055 servo just to make rtr
custom wheely bar with rubber airplane wheels
mad armor rims tires
mad armor ring gear and pinion
buggy shocks with dust boot in good shape
hpi radio
370$ plus shipping
HTTP://users.adelphia.net/~tjjohnson2/twin1.jpg
HTTP://users.adelphia.net/~tjjohnson2/twin2.jpg
Maxx hybrid roller, it has
revo trans with custom motor mount
twin force battery cages slung under t-maxx chassi
traxxas front aluminum bulks and integey rear aluminum bulks
rpm bulk braces
traxxas aluminum chassi braces
rear aluminum cvds
center revo shafts
cut savage springs
aluminum front and rear skids
cool rims and street tires dunno got second hand
2.5 maxx arms and towers
electronics is a cs 70 steering 2055 brake
hex screws through out
150$ plus shipping
needs motor esc, radio, and body
HTTP://users.adelphia.net/~tjjohnson2/ehybrid.jpg
3905 Brushless E-maxx 16.8v RTR, I actually proven that the 3905 does stand upto brushless power plants. I have had this truck a few months and only had 10 packs ran through it. I just do not have time for RC any more now that I ride ATV. This has the Hacker Master comp ESC that is good for 12 or 14 cell operation and Fiegao 10L 550 size motor. The motor and speed control are the perfect ballance of speed and torque. I like the large can due to how fast the rotor spools up for acceleration and the size of the rotor for its torque, To me it is the perfect balance. This is not like the other brushless 3905s with only one venileon 540 system that is way under powered, you have to have 2 to use it. With the 550 brushless motor, 1 is perfect for track or bashing.
I paid 350$ for 3905, 245$ for the Hacker master comp, and 60$ for the Fiegao motor, this is your chance to own it at a fraction of the cost.
Also note the Hacker esc will do 30 degrees timing for true optimal performance on 4 pole and more brushless motors.
The receiver venom 1100mah battery and deans ultra plug Y adampter are included. The GP3300 packs are NOT included in picture
450$ plus shipping
HTTP://users.adelphia.net/~tjjohnson2/39051.jpg
HTTP://users.adelphia.net/~tjjohnson2/39052.jpg
HTTP://users.adelphia.net/~tjjohnson2/39053.jpg
Ultimate Basher a Twin force Brushless, this is the most solid basher there is, I have got plenty of time on this truck cause it is so much fun to play with and does not cost me an arm and a leg since I do not have to repair it much.
Fiegao 10L
Mtronics pro esc
kyosho tcd diffs in front and rear with pinion gears
kyosho mp5 center universals
hitech 5645 servo
Rixgear steering ball bearing steering upgrade
Kyosho special steering rods
body is beat to hell
650$ plus shipping
HTTP://users.adelphia.net/~tjjohnson2/twin3.jpg
Ultimate Brushless Monster
I built this truck and all custom work to be rock solid. This truck is the most awesome stump/Monster truck puller I could make.
This truck runs flawless and absolutly no cogging.
BombProof Torpedo chassi with front a rear bulk braces
Twin force battery cages slung under
Twin Force chain drive trans with Traxxas spur and front one way bearing
FLM Hybrid Bulks, bulks and 1/8th scale diff cases built into one unit
Kyosho tcd diff in front, and kyosho 6 spyder in rear both real harden steel
Unlimited Engineiring shock towers
Proline Power stroke shock set
Proline suspension kit
RPM 15mm bearing knuckles
Titanium cvds both front and rear
RC Alloys center rear and kyosho twinforce bone up front
Mip steering kit with bearings
titanium front skid and rpm rear skid
stock revo wheels
aluminum 14mm wheel hexes
xxxnt kevlar spur
Hitech 645 servo
Feigao 9xl C motor
Shculze 18.97 esc
All for the mier price of 1200$ plus shipping
HTTP://users.adelphia.net/~tjjohnson2/hybrid1.jpg
HTTP://users.adelphia.net/~tjjohnson2/hybrid2.jpg
HTTP://users.adelphia.net/~tjjohnson2/hybrid3.jpg
2 Mean Well model:esp-240-13.5 Power Supply 13.5v 16amp 50$ each
high efficiency switch mode power supply,
low noise & ripple,
over load, overtempeture & over voltage protection
each unit retails for 125$ each
HTTP://users.adelphia.net/~tjjohnson2/psu1.jpg
HTTP://users.adelphia.net/~tjjohnson2/psu2.jpg
GPM revo allow LT rocker arms 20$
mini-t nip GPM allow front pivot block 10$
Trinity micro aluminum pinion set 10$
gws micro pinion puller 15$
airtonics 94091 mini servo with servo saver 15$
Traxxas 20 tooth pinion nip 3$
2 18 tooth 32 pitch 4MM pinions used on lehner motors 10$ for both
Xipp Xapper dcx3300 70$
Ofna racing starter box 45$ for 10th scale but can use on 1/8th scale has jumbo motor that does not wear out
EVX, has plasty dip on some of the wires 45$
used stock x-speed 550 motors 10$
HTTP://users.adelphia.net/~tjjohnson2/stuff.jpg
HTTP://users.adelphia.net/~tjjohnson2/xipstart.jpg
Brushless Turnigy 120amp esc and Turnigy 4L 2700kv motor brand new 110$ plus shipping
HTTP://users.adelphia.net/~tjjohnson2/blem.jpg
E-maxx trans with ultramaxxed gear set and integy auluminum case 225$
2 Hacker master comps brushless esc with 5.5mm male conectors 165$
MM esc used twice has deans and 3.3mm conectors 100$
castle 540 5700 brushless motor used twice 45$
evx2 with titans used 4 times 90$
Fiegao 9XL Car can 5.5mm conectors 80$
HTTP://users.adelphia.net/~tjjohnson2/b2.jpg
may trade
interested in PS3 and Wii, ATV stuff, at&t tilt phone, but need cash for 4 wheeler mostly
Mechwarriorjon@hotmail.com
Brushless trucks, and brushless stuff
Similar Threads