RC Sale
#1
Tech Apprentice
Thread Starter
RC Sale
Got a bunch of stuff that needs to go ! More pix are available. Reasonable offers will be exchanged, and all are priced as "local buyer pick-up". Combined shipping discount. If buying multiple stuff, ask for a better price ! Emails work well, mahalo for looking
[email protected]
* Durtrax ICE charger.........SOLD
used but in great condition, perfrect working order.
* Hobbico 905 charger........$15
used but in good condition, perfect working order.
* Dynamite 5 cell flat Rx pack......$18
brand new, never used 1100 mah.
* Tamiya M03L, RTR w/bearings, new ESC-Rx-Tx-tires, body is busted
but still works........$95
Tires, got a bunch of 'um.....
* M Chassis Super Slicks (63's) with Tamiya inserts
both NIP never used..........$22
* Losi rear Taper Pins mounted, 2 sets for 18T or Mini T
both brand new, never used.......$15
* Pro-Line Dirt Hawg buggy tires, front & rear,mounted on white dish rims
mounted, new condition.........$30
* Pro-Line Speed Hawgs 2.2" truck tires on HPI black chrome Spike rims,
used but great condition, 95% tread remaining.......$30
* Pro-Line Step Pin tires mounted on HPI SS chrome Star rims
barely used, 95% tread remaining.........$20
Recievers and module.......
* Hitec XXL , AM 75mhz
used but working, picked up from someone else.....$30
* Futaba R203HF & module from the 3PK
brand new, never used, FM 75mhz, good price for new
Rx w/free module !...........$70
Bodies.......
* Bolink Micro Mustang lid........$30
This one is HARD to find, but I will think about offers. New & clear,
just out of pkg. for inspection.
* Protoform micro Mazda 6 lid..........$10
New & clear, just out of pkg. for inspection.
* HPI micro Mercedes CLK DTM lid.........$10
New & clear, just out of pkg. for inspection.
* Audi coupe lid for micro.........$10
This one is also hard to find, new & clear.
* AE 18B body & Upper Deck......$8
Upper deck is NIP, body is trimmed & comes w/clear wing.
* Pro-Line 18T Crowd Pleazer......$10
NIP !
* Pro-Line Oval Truck Body 190mm........$20
NIP !
* Tamiya Beetle "Body Set"...........$???
Not sure about selling this one? I will talk about offers. If sold, i'd like it to
go as a "set" which will include the clear body, rims, tires, sticker sheet &
NIP bits that make this body SWEET !
Other Stuff.....
* "Pelican" wireless PS2 controlers, NIP, 1 blk. & 1 silver..............$20
* Mini Rotary Tool (like Dremel but generic), 60 pc. accessory kit, metal
case, never used.........$20
[email protected]
* Durtrax ICE charger.........SOLD
used but in great condition, perfrect working order.
* Hobbico 905 charger........$15
used but in good condition, perfect working order.
* Dynamite 5 cell flat Rx pack......$18
brand new, never used 1100 mah.
* Tamiya M03L, RTR w/bearings, new ESC-Rx-Tx-tires, body is busted
but still works........$95
Tires, got a bunch of 'um.....
* M Chassis Super Slicks (63's) with Tamiya inserts
both NIP never used..........$22
* Losi rear Taper Pins mounted, 2 sets for 18T or Mini T
both brand new, never used.......$15
* Pro-Line Dirt Hawg buggy tires, front & rear,mounted on white dish rims
mounted, new condition.........$30
* Pro-Line Speed Hawgs 2.2" truck tires on HPI black chrome Spike rims,
used but great condition, 95% tread remaining.......$30
* Pro-Line Step Pin tires mounted on HPI SS chrome Star rims
barely used, 95% tread remaining.........$20
Recievers and module.......
* Hitec XXL , AM 75mhz
used but working, picked up from someone else.....$30
* Futaba R203HF & module from the 3PK
brand new, never used, FM 75mhz, good price for new
Rx w/free module !...........$70
Bodies.......
* Bolink Micro Mustang lid........$30
This one is HARD to find, but I will think about offers. New & clear,
just out of pkg. for inspection.
* Protoform micro Mazda 6 lid..........$10
New & clear, just out of pkg. for inspection.
* HPI micro Mercedes CLK DTM lid.........$10
New & clear, just out of pkg. for inspection.
* Audi coupe lid for micro.........$10
This one is also hard to find, new & clear.
* AE 18B body & Upper Deck......$8
Upper deck is NIP, body is trimmed & comes w/clear wing.
* Pro-Line 18T Crowd Pleazer......$10
NIP !
* Pro-Line Oval Truck Body 190mm........$20
NIP !
* Tamiya Beetle "Body Set"...........$???
Not sure about selling this one? I will talk about offers. If sold, i'd like it to
go as a "set" which will include the clear body, rims, tires, sticker sheet &
NIP bits that make this body SWEET !
Other Stuff.....
* "Pelican" wireless PS2 controlers, NIP, 1 blk. & 1 silver..............$20
* Mini Rotary Tool (like Dremel but generic), 60 pc. accessory kit, metal
case, never used.........$20
Last edited by Big-Kid; 07-19-2008 at 02:19 AM.
#2
Tech Apprentice
Thread Starter
Selling two motors. First up for sale is my Mach 26, Losi pipe and clutch. This motor combo came out of my LST. The Mach 26 had TONS of power and speed. Less than 2 gallons total. Break in was 5 tanks, and after run oil used after every session. This motor ran well all day long for me, and was easy to tune.
Everything is in great shape. The block, head and carb show little signs of use. The pipe has a few nicks and scratches, but mostly around the stinger from regular runnig.
This Mach 26 package is being sold with the stock carb, Losi pipe & manifold and stock Losi clutch. It will come with a FREE blue fuel filter and air filter. Also NIP is a bottle of pre-filter treatment.
Mahalo for looking, and let me know if anyone has questions.
I'm looking for $75 local buyer pick up OBO . Mahalo for looking and let me know if there are any questions. Emails work well. Pix coming shortly.
[email protected]
Everything is in great shape. The block, head and carb show little signs of use. The pipe has a few nicks and scratches, but mostly around the stinger from regular runnig.
This Mach 26 package is being sold with the stock carb, Losi pipe & manifold and stock Losi clutch. It will come with a FREE blue fuel filter and air filter. Also NIP is a bottle of pre-filter treatment.
Mahalo for looking, and let me know if anyone has questions.
I'm looking for $75 local buyer pick up OBO . Mahalo for looking and let me know if there are any questions. Emails work well. Pix coming shortly.
[email protected]
Last edited by Big-Kid; 07-19-2008 at 02:13 AM.
#3
Tech Apprentice
Thread Starter
Next is my brand New Collari 32 enigine with new Werks exhaust and Sirio carb. This monster has never been used, and only removed form the package for inspection when I bought it. The Werks manifold and pipe match it perfectly. The carb has "Sirio" stamped on the side, and is still NIP. A new, spare gasket and springs are included, so you are read to go. Everything is in mint condition and still sitting in their boxes.
The exhaust is carring part # WRX6672C and the Collari is part #MLC32-RS. The Collari 32 retailed for $350, while the Werks exhaust for $70. I'm looking for $275 OBO with local buyerpick-up. Emails work well and pix will follow.
The exhaust is carring part # WRX6672C and the Collari is part #MLC32-RS. The Collari 32 retailed for $350, while the Werks exhaust for $70. I'm looking for $275 OBO with local buyerpick-up. Emails work well and pix will follow.
Last edited by Big-Kid; 07-19-2008 at 02:16 AM.
#4
Tech Apprentice
Thread Starter
More pix added. Let me know if you'd like another pix of the item of intrest. ICE is sold.
I've got a couple of things i'd sell. Theres a 12L4 or possibly my TLT that could go.
Mahalo for looking
I've got a couple of things i'd sell. Theres a 12L4 or possibly my TLT that could go.
Mahalo for looking
#5
Tech Apprentice
Thread Starter
Lots of stuff for sale, hopefully it all will. More pix are available. Thanks for looking
#6
Tech Apprentice
Thread Starter
Bump
#7
Tech Apprentice
Thread Starter
Bump To The Top
#8
Tech Apprentice
Thread Starter
TTT
#9
Tech Apprentice
Thread Starter
TTT
#10
Tech Apprentice
Thread Starter
bump
#11
Do you have any pics of M03L?
#12
Tech Apprentice
Thread Starter
When I get home from work tonight, i'll post up some pix of the M03.
I'll get some of the Tamiya bettle body set as well.
I'll get some of the Tamiya bettle body set as well.
#13
Tech Apprentice
Thread Starter
M03 pix added.
I'll take some pix of the back side of the Speed Hawgs.
Thanks for looking guys
I'll take some pix of the back side of the Speed Hawgs.
Thanks for looking guys