}~MLST2 with aluminum and others, NEED TO SELL ASAP, NO TRADES
07-06-2008, 09:42 PM
#1
}~MLST2 with aluminum and others, NEED TO SELL ASAP, NO TRADES
I lost my license from an unpaid ticket, and I have to sell this (which i dont want too, but need too) to get my license back. So what your looking at here is a Mini-Lst 2. This truck has sway bars that I have added. Hasn't been ran much at all, does have some minor scratches on the bottom (like 4) and a few on the body, not cracks or anything, nothing is missing on the truck at all. Has the losi batt back and slow charger, I have polished the motors, so their both shiny. I have also just added (only ran 1 time after these have been installed) aluminum lower a-arms on front and rear and also front steering arms.
x2 Lower Arms:
http://www.dynamiterc.com/Products/...ProdID=DYN8251B
X1 Steering Arms:
http://www.losipartshouse.com/servl...cln-MLST/Detail
Also have an extra wheel and 1 extra tire. And also the stock parts that came off and I think a couple extra parts. There are green springs in front and rear. I'm wanting the money only for right now, so I'll pass on trade offers. Wanting $230 + 15 shipping which is a pretty good deal on an almost new looking truck, I believe I have the manual and also have the adapter for the battery to charge with your peak charger which is nip. The truck also has the DSM setup (RX/TX) which doesnt require any crystal's and has a ton of different FREQ, I also have the bind plug for the receiver. Basically everything is there if you bought one new ($199.99 http://www.horizonhobby.com/Product...ProdID=LOSB0217) plus the added things listed that looks brand new still and used 1 time.
I also have 3 more NIP servo's I can throw in for $30.00 bucks more. (less than half the price compared to 20+ a piece)
http://www.horizonhobby.com/Product...ProdID=LOSB0815
also i got a Hacker E-30-16L brushless motor on the way which is new unused and still in the package i can add for an additional $30.00.
I will let everything listed above, RTR Mlst2, Servo's, BL motor all go for $285 shipped.
Remember everything listed is either new and unused or used like new condition. pretty good deal on all of this.
Need more pics, just post and ask, leave an email and I'll send away!
heres pics of everything that comes with it besides the motor (hasnt arrived just yet) And ofcourse if you dont buy it as a package deal, the little odds and ends go with the truck, like the wheel nuts, washers, little screws, etc.
Price's are not set, their mainly starting prices on things. cheapest way would be to buy it all, shipping will probably be around 15 for all of this, so thats everything for 270, the servo's and BL motor alone are over 100 new, the aluminum is around 60, and would make the truck around 110. best way to get it at a good price, id like to have it all go, since i wouldnt have use for the rest and dont want to mess with selling it later.
x2 Lower Arms:
http://www.dynamiterc.com/Products/...ProdID=DYN8251B
X1 Steering Arms:
http://www.losipartshouse.com/servl...cln-MLST/Detail
Also have an extra wheel and 1 extra tire. And also the stock parts that came off and I think a couple extra parts. There are green springs in front and rear. I'm wanting the money only for right now, so I'll pass on trade offers. Wanting $230 + 15 shipping which is a pretty good deal on an almost new looking truck, I believe I have the manual and also have the adapter for the battery to charge with your peak charger which is nip. The truck also has the DSM setup (RX/TX) which doesnt require any crystal's and has a ton of different FREQ, I also have the bind plug for the receiver. Basically everything is there if you bought one new ($199.99 http://www.horizonhobby.com/Product...ProdID=LOSB0217) plus the added things listed that looks brand new still and used 1 time.
I also have 3 more NIP servo's I can throw in for $30.00 bucks more. (less than half the price compared to 20+ a piece)
http://www.horizonhobby.com/Product...ProdID=LOSB0815
also i got a Hacker E-30-16L brushless motor on the way which is new unused and still in the package i can add for an additional $30.00.
I will let everything listed above, RTR Mlst2, Servo's, BL motor all go for $285 shipped.
Remember everything listed is either new and unused or used like new condition. pretty good deal on all of this.
Need more pics, just post and ask, leave an email and I'll send away!
heres pics of everything that comes with it besides the motor (hasnt arrived just yet) And ofcourse if you dont buy it as a package deal, the little odds and ends go with the truck, like the wheel nuts, washers, little screws, etc.
Price's are not set, their mainly starting prices on things. cheapest way would be to buy it all, shipping will probably be around 15 for all of this, so thats everything for 270, the servo's and BL motor alone are over 100 new, the aluminum is around 60, and would make the truck around 110. best way to get it at a good price, id like to have it all go, since i wouldnt have use for the rest and dont want to mess with selling it later.
Last edited by tyhodge07; 07-06-2008 at 09:53 PM.
07-06-2008, 11:49 PM
#2
bed time bump
07-07-2008, 10:43 AM
#3
07-07-2008, 02:06 PM
#4
bump before work
07-07-2008, 07:19 PM
#5
07-08-2008, 02:14 AM
#6
bed time bump
07-08-2008, 11:55 AM
#7
07-09-2008, 12:08 AM
#8
bump, hopefully motor will be here in the next day or 2.
Last edited by tyhodge07; 07-09-2008 at 12:14 PM.
07-09-2008, 07:48 PM
#9
07-10-2008, 03:25 AM
#10
07-10-2008, 11:18 AM
#11
07-10-2008, 07:55 PM
#12
mlst2 rtr plus the aluminum parts, 230 shipped
07-11-2008, 06:39 PM
#13
07-12-2008, 01:07 PM
#14
need the money, but throw some trade offers at me, id like a tmaxx 2.5 rtr in nice condition, but throw some offers at me. may also part with some stuff.
07-12-2008, 06:54 PM
#15