Corally SP12M Pan Car and brushless Exotek RC18T both ARTR
03-22-2008, 01:46 PM
#1
Corally SP12M Pan Car and brushless Exotek RC18T both ARTR
I'm selling this stuff on behalf of a fellow racer. All of it is in EXCELLENT condition. Very low miles; raced less than half the winter season with this stuff. The Corally car is an older model but was bought new less than 4 months ago.
Team Corally SP12M 1/12 Pan Car
Servo: Hitec HS-225MG
ESC: Tekin FX Pro
Batteries: GP3300 Saddle Packs w/12 Gauge & Deans (3 packs)
Body: Parma Speed 8 HD Lightweight Custom Painted
Motor: Trinity CO27 Pro w/ new Trinity Brushes/Springs
Upgrades: Ceramic diff balls, Alum front body posts, GRP wishbones, Silver and Gold dot foams.
Pinion/Spur: 81T/17T 64Pitch
Spares: Battery posts, Bearings, washers, wishbones, screws, nuts, build spares and more.
Needs: r/x
$150 shipped
Team Associated Factory Team RC18T 1/18 Mini
ExoTek Carbon fiber conversion
Servo: HS-65HB
ESC: Mamba 25 w/ Deans
Motor: Mamba 5400kv
Batteries: Intellect IB1400's 6cell Saddles w/ Deans (2 Packs)
Body: Proline Crowd Pleazer 2.0 (2 bodies) Both custom painted
Upgrades: ExoTek Conversion, Parma Foams, Parma white rims w/ 1/2" offset, Lunsford Titanium Turnbuckles & Steering arm, Lunsford Balls & ball cups, GPM CVDs, RPM front bumper, RPM Front and rear Shock towers, Niteline CF Wing, GPM Alum wing mounts, GPM Front and Rear Alum Shocks, Team AE Gold Springs, AE Outdrive sleeves, and probably more.
Spares: Complete diff, shock caps, outdrives, nuts, screws, and more.
Needs: r/x
Asking $300 shipped OBO
Neither one comes with a radio or receiver.
PayPal only
Charger is a Super Brain 977 that's practically brand new. It's charged 2 packs and has been sitting in the box since. Comes with Deans plugs installed.
Asking $75 shipped
Team Corally SP12M 1/12 Pan Car
Servo: Hitec HS-225MG
ESC: Tekin FX Pro
Batteries: GP3300 Saddle Packs w/12 Gauge & Deans (3 packs)
Body: Parma Speed 8 HD Lightweight Custom Painted
Motor: Trinity CO27 Pro w/ new Trinity Brushes/Springs
Upgrades: Ceramic diff balls, Alum front body posts, GRP wishbones, Silver and Gold dot foams.
Pinion/Spur: 81T/17T 64Pitch
Spares: Battery posts, Bearings, washers, wishbones, screws, nuts, build spares and more.
Needs: r/x
$150 shipped
Team Associated Factory Team RC18T 1/18 Mini
ExoTek Carbon fiber conversion
Servo: HS-65HB
ESC: Mamba 25 w/ Deans
Motor: Mamba 5400kv
Batteries: Intellect IB1400's 6cell Saddles w/ Deans (2 Packs)
Body: Proline Crowd Pleazer 2.0 (2 bodies) Both custom painted
Upgrades: ExoTek Conversion, Parma Foams, Parma white rims w/ 1/2" offset, Lunsford Titanium Turnbuckles & Steering arm, Lunsford Balls & ball cups, GPM CVDs, RPM front bumper, RPM Front and rear Shock towers, Niteline CF Wing, GPM Alum wing mounts, GPM Front and Rear Alum Shocks, Team AE Gold Springs, AE Outdrive sleeves, and probably more.
Spares: Complete diff, shock caps, outdrives, nuts, screws, and more.
Needs: r/x
Asking $300 shipped OBO
Neither one comes with a radio or receiver.
PayPal only
Charger is a Super Brain 977 that's practically brand new. It's charged 2 packs and has been sitting in the box since. Comes with Deans plugs installed.
Asking $75 shipped
Last edited by K_B; 05-16-2008 at 01:24 AM.
03-28-2008, 03:06 PM
#5
So I commandeered all my buddy's stuff and took photos myself and inspected everything.
For the most part, everything is in great shape. The Corally will need new rear tires and I noticed a solder joint came loose so I'll fix that before it goes out. The bodies are beat up but still useable. Gonna drop the price on the pan car to $175 shipped.
The RC18T is in great shape overall. The servo saver is shot so new servo saver hardware is included. I think a steering rod-end will need to be replaced. Because of this, I'm dropping the price to $300 shipped.
For the most part, everything is in great shape. The Corally will need new rear tires and I noticed a solder joint came loose so I'll fix that before it goes out. The bodies are beat up but still useable. Gonna drop the price on the pan car to $175 shipped.
The RC18T is in great shape overall. The servo saver is shot so new servo saver hardware is included. I think a steering rod-end will need to be replaced. Because of this, I'm dropping the price to $300 shipped.
04-05-2008, 10:17 PM
#8
hey interested in selling the mamba 5400 combo?
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
