4th 'O July Hobby Room Clean Out SALE!!!!
07-06-2003, 03:37 PM
#1
4th 'O July Hobby Room Clean Out SALE!!!!
Cleaning out the hobby room. There will be MORE added to the list as the afternoon goes.
Prices are SHIPPED! Postal priority included. The prices are low....I am already paying for shipping.......so you are already getting a deal. NO TRADES......as that would prevent the hobby room from getting thinned out! LOL!
New Items ADDED!!!
KO Propo MARS 75 band FM radio & receiver on channel 89. Excellent condition. $190 shipped.
Xpress mod comm lathe with carbide V blocks, carbide bit, slave motor, nice, small padded carrying case. Literally looks brand spanking new! $125 shipped. (spanking not included! HA!)
13+ Pairs of Electric/Gas 1/10th Truck tires (9 pair rears, 2 pairs of fronts) will NOT seperate.....ALL mounted on ProLine or Losi rims
ProLine Pro192 HoleShot T- NEW
ProLine Pro99 Square Fuzzie - NEW
Team Lose Square X - NEW
ProLine Pro 90 Mini Pin - Like New
ProLine Pro192 HoleShot T - Like New (3 pair, different inserts)
ProLine Pro37 Step Pin - Like New
ProLine Pro196 Bowtie - Like New
Team Losi 7 rib A7505 - NEW
Team Losi 7 rib A7505 - Like New
1 set of 4 foam - almost new $100.00 shipped for ALL!!!!
Kyosho infared tachometer - $45.00
ProSport tire balancer. VERY nice unit that packs in a small case. $50.00
Team CheckPoint motors - 3 of them. One from the original, ORIGINAL run (closed endbell), other two have the aluminum endbell and small brushes. $150.00
I have two pair of purples and two pair of plaid (4 of each), used touring sedan foam tires. One set is like new, other set of 4 has quite a bit of life left in them. $30 shipped in the U.S.
20+ 19T Epic C1 based motors. I never ran them, got them in a package deal. Some are new, some used once/maybe twice. Some from Putnam, Bullit, etc, etc. This is too many motors!! Including all extra arms, cans, endbells. $200.00 shipped. (um...that is 10 bucks a motor!!!).
7 packs of 2000 have great numbers! Ran very, very little with high voltage & runtime. Three from Ballistic and 4 packs from Nuclear. $95.00 SHIPPED!
Twelve 6 cell 2400 packs. These ARE good, matched packs that are assembled with good battery bars. $180.00 shipped!!!!!!!!!!!!!!!!
3 packs of SMH 3000nimh matched packs. $60.00
ADDED:
Bearings (72 total)-I believe they are all new!
five - 4x8x5
five - 8x14x4
eighteen - 6x12x4
four - 4x12x3
seven - 5x8x2
ten - 6x10x3
four - 4x16
eleven front wheel bearings (pan/oval car)
eight - 0.250 id x 0.500 od flanged bearings $100.00 shipped! That's cheap bearings!!!
30 + motor tubes. $25 shipped.
40+ 64 pitch pinions. Most are Robinson Silencer series, some used, some new. Probably not a complete set. Smallest I noticed-19, largest 40. $35.00 shipped. (hmmm.... less than a dollar per pinion!!)
SOLD ITEMS LISTED BELOW
SOLD!!!18 coated pinions-64 pitch. Probably not a complete set. From 46 to 26. Very few are used, most look brand new. $15.00 shipped.SOLD!!!
SOLD!!!Two Cobra International Moto Smooth motor break in machines. I am including a third, but it does not work. Can run off of 12 volt power supply or battery pack. Work GREAT for breaking in brushes. $30.00 shipped.SOLD!!!
SOLD!!!SPURGEARS!
ALL ARE BRAND NEW!!! ALL are 64 pitch!
Eleven Trinity 120 tooth zero friction
one HPI 122 tooth with diff balls
three 104 tooth Kimbrough
four 112 tooth Kimbrough
one 108 tooth Kimbrough
two DuMor 110 tooth (same as Trinity)
one TRC 115 tooth
one Robinson 78 tooth
one Robinson 93 tooth
one Robinson 100 tooth
three Robinson 111 tooth
one Robinson 115 tooth
one Robinson 118 tooth
one Robinson 125 tooth
32 spurgears, all brand new in the package, how about $35.00 shipped!SOLD!!1
SOLD!!!Team Cobra Stock lathe with diamond bit. Condition is excellent. This is for closed endbell motors but can be used for all motors. Comes with slave motor, diamond bit, & original box. $45.00SOLD
Email me at [email protected][
Prices are SHIPPED! Postal priority included. The prices are low....I am already paying for shipping.......so you are already getting a deal. NO TRADES......as that would prevent the hobby room from getting thinned out! LOL!
New Items ADDED!!!
KO Propo MARS 75 band FM radio & receiver on channel 89. Excellent condition. $190 shipped.
Xpress mod comm lathe with carbide V blocks, carbide bit, slave motor, nice, small padded carrying case. Literally looks brand spanking new! $125 shipped. (spanking not included! HA!)
13+ Pairs of Electric/Gas 1/10th Truck tires (9 pair rears, 2 pairs of fronts) will NOT seperate.....ALL mounted on ProLine or Losi rims
ProLine Pro192 HoleShot T- NEW
ProLine Pro99 Square Fuzzie - NEW
Team Lose Square X - NEW
ProLine Pro 90 Mini Pin - Like New
ProLine Pro192 HoleShot T - Like New (3 pair, different inserts)
ProLine Pro37 Step Pin - Like New
ProLine Pro196 Bowtie - Like New
Team Losi 7 rib A7505 - NEW
Team Losi 7 rib A7505 - Like New
1 set of 4 foam - almost new $100.00 shipped for ALL!!!!
Kyosho infared tachometer - $45.00
ProSport tire balancer. VERY nice unit that packs in a small case. $50.00
Team CheckPoint motors - 3 of them. One from the original, ORIGINAL run (closed endbell), other two have the aluminum endbell and small brushes. $150.00
I have two pair of purples and two pair of plaid (4 of each), used touring sedan foam tires. One set is like new, other set of 4 has quite a bit of life left in them. $30 shipped in the U.S.
20+ 19T Epic C1 based motors. I never ran them, got them in a package deal. Some are new, some used once/maybe twice. Some from Putnam, Bullit, etc, etc. This is too many motors!! Including all extra arms, cans, endbells. $200.00 shipped. (um...that is 10 bucks a motor!!!).
7 packs of 2000 have great numbers! Ran very, very little with high voltage & runtime. Three from Ballistic and 4 packs from Nuclear. $95.00 SHIPPED!
Twelve 6 cell 2400 packs. These ARE good, matched packs that are assembled with good battery bars. $180.00 shipped!!!!!!!!!!!!!!!!
3 packs of SMH 3000nimh matched packs. $60.00
ADDED:
Bearings (72 total)-I believe they are all new!
five - 4x8x5
five - 8x14x4
eighteen - 6x12x4
four - 4x12x3
seven - 5x8x2
ten - 6x10x3
four - 4x16
eleven front wheel bearings (pan/oval car)
eight - 0.250 id x 0.500 od flanged bearings $100.00 shipped! That's cheap bearings!!!
30 + motor tubes. $25 shipped.
40+ 64 pitch pinions. Most are Robinson Silencer series, some used, some new. Probably not a complete set. Smallest I noticed-19, largest 40. $35.00 shipped. (hmmm.... less than a dollar per pinion!!)
SOLD ITEMS LISTED BELOW
SOLD!!!18 coated pinions-64 pitch. Probably not a complete set. From 46 to 26. Very few are used, most look brand new. $15.00 shipped.SOLD!!!
SOLD!!!Two Cobra International Moto Smooth motor break in machines. I am including a third, but it does not work. Can run off of 12 volt power supply or battery pack. Work GREAT for breaking in brushes. $30.00 shipped.SOLD!!!
SOLD!!!SPURGEARS!
ALL ARE BRAND NEW!!! ALL are 64 pitch!
Eleven Trinity 120 tooth zero friction
one HPI 122 tooth with diff balls
three 104 tooth Kimbrough
four 112 tooth Kimbrough
one 108 tooth Kimbrough
two DuMor 110 tooth (same as Trinity)
one TRC 115 tooth
one Robinson 78 tooth
one Robinson 93 tooth
one Robinson 100 tooth
three Robinson 111 tooth
one Robinson 115 tooth
one Robinson 118 tooth
one Robinson 125 tooth
32 spurgears, all brand new in the package, how about $35.00 shipped!SOLD!!1
SOLD!!!Team Cobra Stock lathe with diamond bit. Condition is excellent. This is for closed endbell motors but can be used for all motors. Comes with slave motor, diamond bit, & original box. $45.00SOLD
Email me at [email protected][
Last edited by acloco; 07-08-2003 at 10:40 PM.
07-06-2003, 03:44 PM
#2
cobra lathe
Very interested at your lathe. Do you have a picture of it ??? Tell me more.
07-06-2003, 03:51 PM
#3
YGM back at ya!
07-06-2003, 05:06 PM
#5
0.290 purple (schumacher was distributing these, I believe)
0.250 plaid (same as above, 10 spoke/5 star pattern wheel)
0.280 purple (full dish type wheel- trinity)
0.270 plaid (full dish type wheel)
0.250 plaid (same as above, 10 spoke/5 star pattern wheel)
0.280 purple (full dish type wheel- trinity)
0.270 plaid (full dish type wheel)
07-06-2003, 07:29 PM
#7
hehe....sorry. So used to measuring comm's.
2.290
2.250
2.280
2.270
....and that would be inches.
2.290
2.250
2.280
2.270
....and that would be inches.
07-07-2003, 12:43 AM
#9
Xray Racer,
Not sure....got a zip code? I can look it up on www.usps.com .....or UPS or FedEx.
Email me. [email protected]
Not sure....got a zip code? I can look it up on www.usps.com .....or UPS or FedEx.
Email me. [email protected]
07-07-2003, 11:14 PM
#11
Dan,
Lathe is spoken for as of a few minutes ago. If the deal falls through....you are first on the list. THANKS!
Lathe is spoken for as of a few minutes ago. If the deal falls through....you are first on the list. THANKS!
07-08-2003, 06:12 PM
#13
Still have a few people that have not said a definite yes or no on some items. Everything that does not have a sold sign by it....is still available. Thanks!
07-08-2003, 10:41 PM
#14
Added KoPropo Mars FM radio/receiver and an Xpress Mod lathe.
