1/12 Scale package 2 cars lots of tires and parts
#1
1/12 Scale package 2 cars lots of tires and parts
This will be a looong post but be patent as it will be the best 1/12 scale package you can buy, at a great price. Quick run down you will be getting a fully built CRC 3.2 “Bloody Knife” race car, a AE RC12L car in spare parts (it’s all there I promise), tons and tons of spare parts (pinions, spurs, front suspension parts, nuts, bolts, etc.), and a whole S%#t load of tires (some new, some used).
- CRC 3.2 “Bloody knife” 1/12 scale race car. As with all my other carbon chassis cars this one has the edges sanded to perfection and polished to a gloss finish, except one piece. A screw came loose on the motor holder and it broke the top carbon plate. So I replaced it with a brand new part and never got around to sanding it. The 3.2 has been upgraded with:
- APS Carbide diff balls
- APS Ceramic bearings
- CRC red aluminum front strut tower brace
- The battery brace that keeps them from moving around when you are in an accident is originally held in with metal screws and washers. With the possibility of the batteries grounding out on the chassis (it’s happened to me before ) I replaced these metal screws with nylon screws and nuts.
- AE RC12L car but un-assembled. I was going to make a hybrid car between the two (RC12L and the 3.2) but never got around to it. So it never got re-assembled.
- Here is a list of the spare parts that also come with the package:
- 1 Pair aftermarket cut lower A-Arms to raise the ride height of the car
- 1 Pair extra stock lower A-Arms
- 1 Extra center shock
- 31T 64p pinion
- 29T 64p pinion
- 25T 64p pinion
- 23T 64p pinion
- 35T 64p pinion
- 102T 64p spur
- [x2] 96T 64p spur
- Lots and lots of caster plates for the front suspension
- Lots and lots of axle height adjusters
- [x3] blue metal nylon lock nut for the rear axle (the stock nut is plastic and strips out the first time out)
- Red plastic rear axle nut from the stock CRC 3.2 kit (I never used it)
- Extra ball cup ends
- [x2] NEW battery rubber bands for the CRC 3.2
- Lots of body clips
- Lots of Blue, Red, Black, Silver screws, extra diff balls, washers, etc.
- $0.20 (two dimes) to put on the front tires to check for tweak hehe
Here are the tires that are included with the package:
Front:
- 1 pair NEW (1.925”” dia) CRC tires that came with the 3.2
- 1 par Jaco Purple (1.7” dia)
- 1 pair Jaco Pink (1.83” dia)
- 1 pair Jaco Purple (1.82” dia)
- 1 pair Jaco Pink (1.835” dia)
- 1 pair TRC “35” Magenta (1.795” dia)
- 1 pair TRC “40” Purple (1.711” dia)
- 1 pair NEW TRC “30” Pink (1.9” dia)
Rear:
- 1 pair NEW (2.045” dia) CRC tires that came with the 3.2
- 1 pair Jaco Double Pink (2.022” dia)
- 1 pair Jaco Pink (1.925” dia)
- 1 pair Jaco Gray (1.765” dia) (one tire has chunks missing on edge not to bad but probably practice tires)
- 1 pair NEW Jaco Green (2.058” dia)
- 1 pair TRC “35” Magenta (1.910” dia)
- 1 pair NEW TRC “35” Magenta (2.1” dia)
- 1 pair NEW TRC “40” Purple (2.075” dia)
All the pictures can been viewed here:
http://www.osbornhouse.com/rc/12scale/
I am asking $185 local picked up or $195 shipped
If you have any questions shoot me a PM or e-mail
- Dana
[email protected]
- CRC 3.2 “Bloody knife” 1/12 scale race car. As with all my other carbon chassis cars this one has the edges sanded to perfection and polished to a gloss finish, except one piece. A screw came loose on the motor holder and it broke the top carbon plate. So I replaced it with a brand new part and never got around to sanding it. The 3.2 has been upgraded with:
- APS Carbide diff balls
- APS Ceramic bearings
- CRC red aluminum front strut tower brace
- The battery brace that keeps them from moving around when you are in an accident is originally held in with metal screws and washers. With the possibility of the batteries grounding out on the chassis (it’s happened to me before ) I replaced these metal screws with nylon screws and nuts.
- AE RC12L car but un-assembled. I was going to make a hybrid car between the two (RC12L and the 3.2) but never got around to it. So it never got re-assembled.
- Here is a list of the spare parts that also come with the package:
- 1 Pair aftermarket cut lower A-Arms to raise the ride height of the car
- 1 Pair extra stock lower A-Arms
- 1 Extra center shock
- 31T 64p pinion
- 29T 64p pinion
- 25T 64p pinion
- 23T 64p pinion
- 35T 64p pinion
- 102T 64p spur
- [x2] 96T 64p spur
- Lots and lots of caster plates for the front suspension
- Lots and lots of axle height adjusters
- [x3] blue metal nylon lock nut for the rear axle (the stock nut is plastic and strips out the first time out)
- Red plastic rear axle nut from the stock CRC 3.2 kit (I never used it)
- Extra ball cup ends
- [x2] NEW battery rubber bands for the CRC 3.2
- Lots of body clips
- Lots of Blue, Red, Black, Silver screws, extra diff balls, washers, etc.
- $0.20 (two dimes) to put on the front tires to check for tweak hehe
Here are the tires that are included with the package:
Front:
- 1 pair NEW (1.925”” dia) CRC tires that came with the 3.2
- 1 par Jaco Purple (1.7” dia)
- 1 pair Jaco Pink (1.83” dia)
- 1 pair Jaco Purple (1.82” dia)
- 1 pair Jaco Pink (1.835” dia)
- 1 pair TRC “35” Magenta (1.795” dia)
- 1 pair TRC “40” Purple (1.711” dia)
- 1 pair NEW TRC “30” Pink (1.9” dia)
Rear:
- 1 pair NEW (2.045” dia) CRC tires that came with the 3.2
- 1 pair Jaco Double Pink (2.022” dia)
- 1 pair Jaco Pink (1.925” dia)
- 1 pair Jaco Gray (1.765” dia) (one tire has chunks missing on edge not to bad but probably practice tires)
- 1 pair NEW Jaco Green (2.058” dia)
- 1 pair TRC “35” Magenta (1.910” dia)
- 1 pair NEW TRC “35” Magenta (2.1” dia)
- 1 pair NEW TRC “40” Purple (2.075” dia)
All the pictures can been viewed here:
http://www.osbornhouse.com/rc/12scale/
I am asking $185 local picked up or $195 shipped
If you have any questions shoot me a PM or e-mail
- Dana
[email protected]
#2
Bump
I also forgot I have a NEW 1/12 scale body un-painted I will throw in with the deal.
I also forgot I have a NEW 1/12 scale body un-painted I will throw in with the deal.
#3
ttt make offers