Matrix Buggy Factory Race Pro kit LOOK!!!
11-28-2007, 08:44 AM
#1
Matrix Buggy Factory Race Pro kit LOOK!!!
SOLD
have for sale a very nice CEN Matrix Buggy Factory Race Pro kit. The car is about 5 months old and has minimal run time on it. Includes an O.S. RG .21 still runs quite well, an Ofna tuned pipe, 2 almost new JR z650 servos with aluminum servo horns, 5 cell 1100Mah receiver pack, Front CNC aluminum spindles, front CNC aluminum 22 degree spindles carriers, CNC aluminum upper plate, threaded hinge pins, captured hinge pins on the carriers, Gene Hickerson's hardened steel cross pins all the way around, Pro-Line Low Pro air filter, 2 painted bodies that show quite a bit of wear, Maximizer rear skid plate, Panther Komodo II's on white wheels that still have about 75% left on them, and many others. All you will need is a a transmitter and receiver.
It also comes with the following spare parts:
GS020 Flange Bushings
MX007 Gear Box
MX012 Front Upper Arms
MX016 Wing Mount
CT032 Rod Ends 6.8
MX013 Center Diff. Mount
MX073 Alum. Steering Post
GS074 Ball End 7.8
GS223 Rubber Dampers
MX009 Front Lower Arms
MX072 17m Wheel Nuts
MX039 Steering Rod
MX042 Servo Saver Parts
Upper and Lower Rear Arms
Steering and Throttle Linkage
All you will Need is you radio and receiver, servos already installed
I will take $270.00 shipped I will accept PayPal. Thanks
[email protected]
have for sale a very nice CEN Matrix Buggy Factory Race Pro kit. The car is about 5 months old and has minimal run time on it. Includes an O.S. RG .21 still runs quite well, an Ofna tuned pipe, 2 almost new JR z650 servos with aluminum servo horns, 5 cell 1100Mah receiver pack, Front CNC aluminum spindles, front CNC aluminum 22 degree spindles carriers, CNC aluminum upper plate, threaded hinge pins, captured hinge pins on the carriers, Gene Hickerson's hardened steel cross pins all the way around, Pro-Line Low Pro air filter, 2 painted bodies that show quite a bit of wear, Maximizer rear skid plate, Panther Komodo II's on white wheels that still have about 75% left on them, and many others. All you will need is a a transmitter and receiver.
It also comes with the following spare parts:
GS020 Flange Bushings
MX007 Gear Box
MX012 Front Upper Arms
MX016 Wing Mount
CT032 Rod Ends 6.8
MX013 Center Diff. Mount
MX073 Alum. Steering Post
GS074 Ball End 7.8
GS223 Rubber Dampers
MX009 Front Lower Arms
MX072 17m Wheel Nuts
MX039 Steering Rod
MX042 Servo Saver Parts
Upper and Lower Rear Arms
Steering and Throttle Linkage
All you will Need is you radio and receiver, servos already installed
I will take $270.00 shipped I will accept PayPal. Thanks
[email protected]
Last edited by cbboatworks; 11-28-2007 at 03:49 PM. Reason: Pictures
11-28-2007, 09:57 AM
#2
TTT
11-28-2007, 10:07 AM
#3
Cen
Hey man Nice bug, I have almost exactly what you have minus the CNC caster C-hubs and maximizer rear skidplate. I've got the O.S. RG 21 and everything else, my wing is even the same color. Aluminum servo horns the whole she-bang!! WIERD. BUMP for a great ride and close to a grand I might add.
PS where did you get the maximizer skid plate?
PS where did you get the maximizer skid plate?
11-28-2007, 10:34 AM
#5
Hey man Nice bug, I have almost exactly what you have minus the CNC caster C-hubs and maximizer rear skidplate. I've got the O.S. RG 21 and everything else, my wing is even the same color. Aluminum servo horns the whole she-bang!! WIERD. BUMP for a great ride and close to a grand I might add.
PS where did you get the maximizer skid plate?
PS where did you get the maximizer skid plate?
Thanks for looking
11-28-2007, 10:35 AM
#6
11-28-2007, 11:29 AM
#7
Bump
11-28-2007, 01:47 PM
#8
TTT
11-28-2007, 03:46 PM
#10
SOLD
SOLD SOLD SOLD
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
