FS: RC18T - Brushless, CVD's, Li-Po
#1
Tech Apprentice
Thread Starter
FS: RC18T - Brushless, CVD's, Li-Po
Item is located in Sydney, Nova Scotia.
I'm looking for $185 plus shipping(PM me your address and I'll calculate it, should be about $20 in Canada/US, give or take.
- Mamba 6800 and ESC combo
- Blue spring coil over servo saver, can be taken off, makes servo saver VERY stiff and steering much more accurate
- Inlcudes aluminum front shocks, need to be rebuilt(will not be installed)
- Rear shocks all around, gold springs 40wt shock oil
- Driven Productions Delrin Steering Drag link
- Driven Productions 1/10th scale Hex Adapters
- 3Racing 1/10th scale rims/tires, rims have some chips in them, tires are worn, but still usable
- Alloy 1/18th scale wheels with some offroad tire that came with them. Rims are scuffed, tires still look new.
- BRP front bumper(best front bumper for the 18t, small crack in it, doesn't appear to significantly reduce effectiveness)
- Full Set of MIP CVD's
- 16/60 Gearing
- 2100Mah Thunder Power Li-Po(fits without trimming chassis, only had to trim antenna mount)
- Antenna is mounted in a hole in the front shock tower and ziptied to upper chassis.
- Deans on battery/ESC
- Stock Servo
- Stock TX/RX
- One of the links for the steering a bit worn, will pop off if the truck cartwheels
- Inlcudes spare spur gear.
- Body is in pretty good shape
Pictures:
Thanks!
Greg
I'm looking for $185 plus shipping(PM me your address and I'll calculate it, should be about $20 in Canada/US, give or take.
- Mamba 6800 and ESC combo
- Blue spring coil over servo saver, can be taken off, makes servo saver VERY stiff and steering much more accurate
- Inlcudes aluminum front shocks, need to be rebuilt(will not be installed)
- Rear shocks all around, gold springs 40wt shock oil
- Driven Productions Delrin Steering Drag link
- Driven Productions 1/10th scale Hex Adapters
- 3Racing 1/10th scale rims/tires, rims have some chips in them, tires are worn, but still usable
- Alloy 1/18th scale wheels with some offroad tire that came with them. Rims are scuffed, tires still look new.
- BRP front bumper(best front bumper for the 18t, small crack in it, doesn't appear to significantly reduce effectiveness)
- Full Set of MIP CVD's
- 16/60 Gearing
- 2100Mah Thunder Power Li-Po(fits without trimming chassis, only had to trim antenna mount)
- Antenna is mounted in a hole in the front shock tower and ziptied to upper chassis.
- Deans on battery/ESC
- Stock Servo
- Stock TX/RX
- One of the links for the steering a bit worn, will pop off if the truck cartwheels
- Inlcudes spare spur gear.
- Body is in pretty good shape
Pictures:
Thanks!
Greg
#2
Tech Initiate
intersted in a x-ray t1 1/10 its rtr but i would need somthing else or chash with it lmk if you might be intersted in this thankyou
#3
Tech Apprentice
Thread Starter
Sorry, no trades.
Thanks for the interest.
Greg
Thanks for the interest.
Greg
#4
Tech Apprentice
Thread Starter
Bump.
Send me reasonable offers! Possibly looking for a T-Rex 450 for trade.
Thanks!
Send me reasonable offers! Possibly looking for a T-Rex 450 for trade.
Thanks!
#5
Tech Apprentice
Thread Starter
Bump.
There must be someone looking for an 18t here.
Greg
There must be someone looking for an 18t here.
Greg
#6
Tech Apprentice
Thread Starter
Bump.
Price lowered to $200 Shipped.
Greg
Price lowered to $200 Shipped.
Greg
#7
Tech Apprentice
Thread Starter
Bump.
#8
Tech Apprentice
Thread Starter
Bump.
#9
Tech Apprentice
Thread Starter
Bump.
$195 Shipped, or $175 plus actual shipping
$195 Shipped, or $175 plus actual shipping
#11
Tech Apprentice
Thread Starter
Responded to your PM yesterday.
Bump once again.
Greg
Bump once again.
Greg
#12
Tech Apprentice
Thread Starter
Real Nice Truck
Bump...still available
#13
Tech Apprentice
Thread Starter
Bump
Reasonable offers considered.
#15
Tech Apprentice
Thread Starter
New pics:
Thanks,
Greg
Thanks,
Greg