GSCL-1

iTrader: (2)

*THERE IS NO RB S7lll*

*There is 4 posts worth of info!*

GS CL-1 x2

Hi, I have 2 GS CL-1's for sale. Here's some info:

GS Racing’s all new Storm CL-1 is designed and built to provide unmatched acceleration, improved handling, greater durability, and precise tuning. Utilizing the smallest differentials on the market, the ultra low c.g. CL-1 accelerates quicker out of the corners and decelerates faster into the corners than the competition. Big-bore shocks are supported by oversized and reinforced suspension arms with pivot ball knuckles in the front and oversized hubs in the rear. The suspension system rides on unique captured suspension mounts, bolted to a 3mm hard anodized Teflon coated chassis. Precise and fine tuning features, such as inboard and outboard toe, active caster, chassis stiffness, and width can be preformed quickly and easily. The CL-1 is loaded with graphite and aluminum parts, and a full line of potions is on the way. All this will help you crush the competition and get you to the finish line first!


Storm CL-1 features:
35﹪up lower C. G. for better handing
Full universal drive shafts
No E-clip lower hinge pin system
 120cc fuel tank with internal filter
 Full precision ball bearings
 L/R Independent Heavy-duty suspension arms
 Fully adjustable suspension
 Strong 3.5mm shock shafts
 3mm 7075 T6 Teflon hard-coated chassis
 Milled T6 aluminum chassis braces
 Lay-down steering servo
 Al Hard-coated Pivot-ball Front Suspension System
 Carbon fiber radio tray, top plate & brake plate
Eccentric holders in the rear hubs allow toe in adjustment

STORM CL-1 Spec:
Length:520mm(20.47")
Width:315mm(12.4")
Height:220mm(8.66")
Ground Clearance:75mm(2.95")
Wheelbase:325~330mm(12.8"~12.99")
Gear Ratio:11.69:1
Track(F/R):F306mm(12.05")/R308mm(12.13")
Weight:3480g(7.6lb)
Tank:120cc



The 1st one, is the racer. It has many Fioroni Hop-ups. If anybody knows Fioroni, there very high quality parts and Italian made not to mention there expensive to. Here’s the list on the Fioroni parts this CL-1 has:

-Fioroni CL-1 Ergal Front Shock Tower (6mm Lightened= $39.99 US
-Fioroni CL-1 Ergal Rear Shock Tower (6mm Lightened)= $40.99 US
- Fioroni CL-1 Ergal Rear Toe-In Block 3° = $30.00 US
-Fioroni CL-1 Ergal Rear Arm Mount 2° Anti Squat = $17.00 US
-Fioroni CL-1 Ergal Front Lower Arm Mount = $30.00 US
- Fioroni CL-1 Ergal Front Upper Arm Mount Set = $36.99 US
-Fioroni CL-1 Front Lower Reinforcement Plate = $31.99 US
-Total = $226.96 US $233CDN


Comes with:
-blue body
-manual
-original box
-Collari B7 (has been pinched needs break in,ran on 20% power master fuel,flywheel iclud,needs new front bearing)
-Glow Ignighter w/2300 NiCd batt

These are the parts that i got B.N.I.P!

1 x GS Racing CL-1 Front Lower Arms (L/R) (GSCCL013) = $13.99
1 x GS Racing CL-1 Wing Mount Set (GSCCL020) = $11.99
1 x GS Racing CL-1 Steering Knuckle (R) (GSCCL011) = $8.49
1 x GS Racing CL-1 Front Upper Arms (GSCCL012) = $11.99
1 x GS Racing 14mm Pivot Ball Cup (4) (GSCAV026) = $6.99
1 x GS Racing Knuckle Pivot Ball Nut (4) (GSCAV025) = $6.99
=$60.44 (pics will be up soon)

*NOTE:The arms (upper,lower,steering knuckle (R),and wing mount set will be brand new) The parts mentioned (with prices) are going on the buggy. therefore, no extra parts.)*

Needs:
-an exhaust system
-electronics(servos, receiver, failsafe, radio system)
-Fuel
-Fuel line
-Clutch system
-Tires/wheels


Price: $200 + shipping

GSCL-1

iTrader: (2)

GSCL-1

iTrader: (2)

The 2nd one can be a racer too but needs minor hop-ups.(aluminum 7075 upper and lower suspension holders that's it!). This one is my back-up/parts buggy. I just received the parts from amainhobbies.com that makes this buggy now complete! Now you have two complete buggies. comes with a starter box and crimefighters mounted (used)

Needs:
-an exhaust system
-electronics(servos, receiver, failsafe, radio system)
-Fuel
-Fuel line
-Clutch system
-Engine

Price: $150 + shipping

Pics:

GSCL-1

iTrader: (2)

Trades: Unless it's for an Team Associated RC8, then no.

Bundles: TAKE EVERYTHING FOR $325 FIRM + shipping NO LOWBALLING!!!!!

That includes everything mention in the posts! (2 cl-1's,collari B7,everything!!!!!)

I can help out with the shipping cost.

If you have any questions please feel free to ask! My cell # is 647-206-1576. My email is [email protected]. or just PM me. Thanks. Tekno.

GSCL-1

iTrader: (2)

bump need gone!

GSCL-1

iTrader: (2)

bump for a great deal and pm is the key.

GSCL-1

iTrader: (2)

bump!!!!!!

tefflawn

iTrader: (2)

bump for a great guy and A+++seller i have bought from him before awesome deals and great guy to deal with.dont hesitate to buy from him.

GSCL-1

iTrader: (2)

Thanks teff! Yea this is an amazing deal two full buggies with fioroni parts a collari b7 etc for $325 + shipping if that's not a deal i don't know what is.

GSCL-1

iTrader: (2)

bump!

GSCL-1

iTrader: (2)

bump!