2 Tmaxx's, RC10GT, T3, Losi XXX-NT, Blackfoot, MX3 radio, and tons of misc. stuff
06-26-2007, 08:10 PM
#1
2 Tmaxx's, RC10GT, T3, Losi XXX-NT, Blackfoot, MX3 radio, and tons of misc. stuff
I will be adding to this post over the next couple days with tons of pictures of everything up for sale. I am selling a lot of vehicles and misc. stuff this week. Here is the partial list:
2 Tmaxx's (1 SOLD)
RC10GT (upgraded rtr)
RC10T3 Team edition (SOLD)
Tamiya king blackfoot (about 14 yrs old and like new)
tmaxx parts
misc. radios
Duratrax Piranha peak charger
and lots more that I will be listing as the week goes on.
Up first is a 1st generation tmaxx that has been a shelf queen. It is upgraded to the max and here is the list:
1st Generation Tmaxx
Dynamite aluminum hopups include:
4mm chassis
Shock towers (Front and Rear)
Body mounts
3mm skidplates (Front and Rear)
Center tranny skidplate
Servo skidplate
Dynamite/Odonnell head (pro .15)
Traxxas aluminum big bore shocks
MIP Temp Gauge
Hitec 645MG servo
RPM black a-arms on all 4 corners
RPM black bulkhead braces front and rear
Stock wheels and tires
2 bodies
1 EZ starter
Truck has been babied and has less than 1 1/2 gallons of fuel ran through it. The engine runs perfect and has tons of compression. All you need are your own radio and receiver to have this truck driving. There is nothing broken on this truck anywhere. I will include a NIP traxxas glow plug with the truck as well. I have a stock traxxas radio and receiver I can include for an extra $20. My price is $200 obo.
TMAXX #2
1st Generation Tmaxx
Hopups include:
Megatech M16 1HP engine
MIP Stinger rear exhaust
RPM blue a-arms on all 4 corners
RPM blue bulkhead braces front and rear
Hitec 625MG High Speed throttle servo
Hitec 5645 Digital High torque steering servo
Traxxas FOC
Traxxas aluminum big bore shocks
Traxxas blue aluminum tranny skidplate
GH aluminum front and rear skidplates
Megatech blue servo skidplate
Megatech blue aluminum steering bellcranks
Ofna heavy duty servo saver
NIMH Receiver pack with battery box removed
Robinson Racing ultimate slipper clutch kit
Robinson Racing lightened flywheel
MIP 4N1 clutch
Blue aluminum inline fuel filter
Aluminum body mounts
I built this truck strictly for racing. The truck has less than 2 gallons of fuel ran through it and runs perfect. The M16 is one fast little engine. The only thing broken on this truck is the gas tank lid. I will either include a new gas tank with the truck or just knock $5 off the cost of the truck for a new one. I took the front driveshafts out of the truck to make it 2wd for the local track but I will include 2 new packs of Traxxas u joints and driveshafts with the truck so it can be converted back to 4wd if needed. All the diff internals up front are still in there. Just add the driveshafts to make it 4wd again. You will only need your radio and receiver to have this truck up and running. I'm asking $200 obo.
2 Tmaxx's (1 SOLD)
RC10GT (upgraded rtr)
RC10T3 Team edition (SOLD)
Tamiya king blackfoot (about 14 yrs old and like new)
tmaxx parts
misc. radios
Duratrax Piranha peak charger
and lots more that I will be listing as the week goes on.
Up first is a 1st generation tmaxx that has been a shelf queen. It is upgraded to the max and here is the list:
1st Generation Tmaxx
Dynamite aluminum hopups include:
4mm chassis
Shock towers (Front and Rear)
Body mounts
3mm skidplates (Front and Rear)
Center tranny skidplate
Servo skidplate
Dynamite/Odonnell head (pro .15)
Traxxas aluminum big bore shocks
MIP Temp Gauge
Hitec 645MG servo
RPM black a-arms on all 4 corners
RPM black bulkhead braces front and rear
Stock wheels and tires
2 bodies
1 EZ starter
Truck has been babied and has less than 1 1/2 gallons of fuel ran through it. The engine runs perfect and has tons of compression. All you need are your own radio and receiver to have this truck driving. There is nothing broken on this truck anywhere. I will include a NIP traxxas glow plug with the truck as well. I have a stock traxxas radio and receiver I can include for an extra $20. My price is $200 obo.
TMAXX #2
1st Generation Tmaxx
Hopups include:
Megatech M16 1HP engine
MIP Stinger rear exhaust
RPM blue a-arms on all 4 corners
RPM blue bulkhead braces front and rear
Hitec 625MG High Speed throttle servo
Hitec 5645 Digital High torque steering servo
Traxxas FOC
Traxxas aluminum big bore shocks
Traxxas blue aluminum tranny skidplate
GH aluminum front and rear skidplates
Megatech blue servo skidplate
Megatech blue aluminum steering bellcranks
Ofna heavy duty servo saver
NIMH Receiver pack with battery box removed
Robinson Racing ultimate slipper clutch kit
Robinson Racing lightened flywheel
MIP 4N1 clutch
Blue aluminum inline fuel filter
Aluminum body mounts
I built this truck strictly for racing. The truck has less than 2 gallons of fuel ran through it and runs perfect. The M16 is one fast little engine. The only thing broken on this truck is the gas tank lid. I will either include a new gas tank with the truck or just knock $5 off the cost of the truck for a new one. I took the front driveshafts out of the truck to make it 2wd for the local track but I will include 2 new packs of Traxxas u joints and driveshafts with the truck so it can be converted back to 4wd if needed. All the diff internals up front are still in there. Just add the driveshafts to make it 4wd again. You will only need your radio and receiver to have this truck up and running. I'm asking $200 obo.
Last edited by MattP; 06-30-2007 at 01:43 PM. Reason: revising list
06-26-2007, 09:36 PM
#3
Team Associated RC10GT
I bought this truck as a rtr model and soon ended up buying every upgrade imaginable for it. Here is the list of upgrades:
Picco xp .15 bumpstart engine
MIP 4N1 clutch
MIP CVD's
Robinson Racing hardened aluminum idler gear
Robinson Racing hardened aluminum diff gear
RPM blue body mounts
RPM blue shock and spring mounts
RPM blue ball cups
RPM blue rear arm mounts
Racers Edge NIMH receiver pack
Hitec 625MG high speed throttle servo
Hitec 625MG high speed steering servo
Trinity blue aluminum front shock tower
Trinity blue aluminum rear shock tower
Associated Chrome pipe
Truck will come with a set of like new proline speed hawgs mounted on RPM chrome wheels. Also come with complete clutch setup and 2 other pairs of wheels and tires.
Truck is NOW being sold as a roller only. I tore the truck apart to clean it and ended up deciding on selling it as a rolling chassis. You will need your engine and electronics to get it running. I will let it go for $60 and you pay shipping.
I bought this truck as a rtr model and soon ended up buying every upgrade imaginable for it. Here is the list of upgrades:
Picco xp .15 bumpstart engine
MIP 4N1 clutch
MIP CVD's
Robinson Racing hardened aluminum idler gear
Robinson Racing hardened aluminum diff gear
RPM blue body mounts
RPM blue shock and spring mounts
RPM blue ball cups
RPM blue rear arm mounts
Racers Edge NIMH receiver pack
Hitec 625MG high speed throttle servo
Hitec 625MG high speed steering servo
Trinity blue aluminum front shock tower
Trinity blue aluminum rear shock tower
Associated Chrome pipe
Truck will come with a set of like new proline speed hawgs mounted on RPM chrome wheels. Also come with complete clutch setup and 2 other pairs of wheels and tires.
Truck is NOW being sold as a roller only. I tore the truck apart to clean it and ended up deciding on selling it as a rolling chassis. You will need your engine and electronics to get it running. I will let it go for $60 and you pay shipping.
Last edited by MattP; 06-30-2007 at 11:31 AM. Reason: Had to change listing
06-26-2007, 10:13 PM
#4
Team Associated RC10T3
I built this truck to race at a local indoor track years ago. I raced it for one summer and it's been sitting ever since. Here is the list of what's included and installed:
LRP F1 Pro Reversing ESC (deans ultra plug soldered on)
Trinity Speed Gems modified motor (deans ultra plug soldered on)
Hitec Lynx radio with receiver
Lunsford titanium turnbuckles
RPM blue ball cups
RPM blue front bumper
RPM blue slipper cover
RPM blue rear bumper
Futaba S3003 steering servo
2 sets of wheels and tires
silver body
I'm asking $125 obo.
I built this truck to race at a local indoor track years ago. I raced it for one summer and it's been sitting ever since. Here is the list of what's included and installed:
LRP F1 Pro Reversing ESC (deans ultra plug soldered on)
Trinity Speed Gems modified motor (deans ultra plug soldered on)
Hitec Lynx radio with receiver
Lunsford titanium turnbuckles
RPM blue ball cups
RPM blue front bumper
RPM blue slipper cover
RPM blue rear bumper
Futaba S3003 steering servo
2 sets of wheels and tires
silver body
I'm asking $125 obo.
06-26-2007, 10:47 PM
#5
If you feel my prices are too high on anything then feel free to make me an offer by PM. I have 100% positive feedback on ebay with the seller id
1bad85gt. So rest assured you will be getting exactly what is described. I have a lot more to list so be patient and check back often. After one week this stuff will be going to ebay. I just wanted to give everyone on here a first shot at all of it.
1bad85gt. So rest assured you will be getting exactly what is described. I have a lot more to list so be patient and check back often. After one week this stuff will be going to ebay. I just wanted to give everyone on here a first shot at all of it.
