captainball

iTrader: (-1)

This plane is awesome and everything is installed and ready to fly. Everything is brand new The engine has only been tested. Everything I have put into this is worth well over $600. I have all papers to show it.
I do belive $400-$450 would be a resonable price to ask for. But make me an offer I have to sell this to fund other projects.
As for shipping. I will ship only if buyer pays for all shipping costs. I will only ship Priority,INSURED, Local Pickup is ok

Goldberg Eagle 2 63" Was a kit but built it. Has blue covering. Brand new never has been flown. May consider new covering. Done by an amature but will last for training.
FEATURES: Balsa and Plywood Die-Cut Construction

INCLUDES:Plane,O.S. .40 LA w/Muffler Natural Also new Still needs to be broken in, Tower Hobbies Easy Tote Prebuilt

SPECS: Wingspan: 63"
Wing Area: 715 sq. in.
Wing Loading: 15.32 to 16.93 oz/sq ft
Weight: 4.75 - 5.25 lbs.
Fuselage Length: 49"
Airfoil: Flat-Bottom High-Wing

TOTE RTU
FEATURES: Large top tray and deep drawer to store tools, Glow Starters and
many other items.
Sturdy shelf and strap holds a gallon jug of fuel securely.
90% pre-assembled.
Foam padded cradles cushion fuselage during maintenance.
Pre-drilled holes in tool rack.
Single drawer to organize small parts.
Pre-painted

SPECS: Overall: Drawer:
Length: 11.75" (298mm) 5.375" (137 mm)
Width: 7.75" (197mm) 3.25" (82.6 mm)
Height: 9.75" (247mm) 3.125" (79.4 mm)

Futaba 4EXA 4-Channel FM Computer/4 S3004 Servos TRAINER CORD ALSO INCLUDED!
FEATURES: Four model memory
Exponential for ailerons, elevator and rudder
Wing mixing function for V-tail and elevons
40-segment LCD screen
Servo reversing
Analog trims with trim memory
End Point Adjustment (EPA) on all 4 channels
Data reset
Trainer system
Low battery alarm
Trainer box capable (trainer cord sold separately, see COMMENTS).
One year limited warranty

INCLUDES: Futaba 4EXA Transmitter with transmitter and receiver crystals
R127DF Receiver
Receiver NiCd Battery: FUTM1295
Transmitter Battery: FUTM1440
Charger: FUTM1830
Four S3004 Servos: FUTM0004
One Bag Servo Mounting Hardware: FUTM3551
SWH-13 Switch Harness: FUTM4370
ANT-5 Transmitter Antenna: FUTM5040
Transmitter strap: FUTM5690
Servo Extension: FUTM3910
Servo Tray
Freq Flag

REQUIRES: Installing servos and receiver and charging batteries

SPECS: 4EX Transmitter
Modulation: FM (Frequency Modulation)
Power Supply: 9.6V NT8S600B NiCd battery or 12V alkaline battery
Current Drain: 250mA

S3004 Servos (4)
Speed: 0.23 sec/60° @ 4.8V
0.19 sec/60° @ 6.0V
Torque: 44 oz-in (3.2 kg-cm) at 4.8V
57 oz-in (4.1 kg-cm) at 6.0V
Length: 1.6" (41mm)
Width: 0.8" (20mm)
Height: 1.4" (36mm)
Weight: 1.3 ounce (37.2 grams)
Connector: "J" type with approx. 5" wire

R127DF Receiver
Narrow Band: 20kHz
Intermediate Frequency- 1st IF: 10.7MHz.5 x 19.8mm)
Weight: 1.0oz (28g)
Power Requirements: 4.8 to 6.0V (shared with servos)
Current Drain: 10mA
Length: 2.52" (64.3mm)
Width: 1.39" (35.8mm)
Height: 0.82" (21.0mm)
Weight: 1.5oz (40.5g)

**You also get
*Heat Gun
*Covering Iron
*Brand new CA Glue
*Extra old engine
*lots of extra misc parts. Give me a call at 734 747-9201 ask for Rob

Pictures will be up soon guys. Thanks