Serpent Impact's, GS SUT+RB 728, Kyosho FW-05T FS
04-11-2007, 05:25 AM
#1
Serpent Impact's, GS SUT+RB 728, Kyosho FW-05T FS
** Will Entertain Offers **
Looking for new project(s).
Selling a Serpent Impact World Champ '02 4wd semi-complete chassis.
Needs front shock tower, throttle linkage, engine/pipe/Rx/Battery.
I got it on eBay last year, without shocks, to complete, but have no time/desire. I will include NIB sealed Serpent RCC shocks for it, which are like $75-100 alone! Has a tower mg/bb steering servo, fail-safe, and throttle servo. full centax clutch setup (this is like $75 alone) + big-block engine mounts w/proper screws included. Porsche 962 (kinda' raggedy) body included. $165 shipped
Might be convinced to sell my other Impact - standard 4wd non-WC version.
needs nothing but your rx, and fuel! This was built, tuned, and raced by Roniel of Serpent USA.
Brand new shoes on it (Ellegi 37's F & R) Novarossi ER15 big-block 15, THS pipe, can throw in a fail-safe if you use analog. This thing runs like a scalded dog with that ER-15! If you've never run a 1/10 235mm car, you don;t know what you're missing! Includes a ragged Lola body. Comes with a few misc spares, like some arms, rear belt, and I forget what else.
$350 shipped
Might sell my GS SUT - no body/wing, but comes with a spare-parts-chassis.
RB TM-728 7-Port .28, tires are fine, runs like I stole it. Engine fires up on 2/3 pulls every time. Can be bump-started as well. $250 shipped
Might also sell a Kyosho FW-05T. Stock GXR-15. I think the PS sticks, but I bump-start everything. basically stock except for center shafts, shocks (off a FW-05RR),and a JR throttle servo. This was the readyset with pre-painted Ferrari body, which has *NEVER* been run on the car. I can throw the Kyosho radio back in.....but WHY? You're welcome to in anyhow. has about 4 break-in tanks, plus about 4 running tanks run though it, so it's pretty usable! I can also toss in some spares, and mebbe some FW-05RR upgrades for it..I probably also have all manuals for it, as well. $165 shipped ConUS?
Now, I won't sell ALL of these - I would prefer, say, to sell the GS SUT, the Impact WC '02, and FW-05Tto fund the EP project.
I'd entertain trade offers for what I'm looking for...
Speaking of which...What I'm looking for:
EP cars (In order of preference):
Tamiya F201 F1 electric car
M18 Pro w/ or without Mamba brushless setup
CRC recent-age 1/12
Robitronics Scalpel
other stuff:
Novak GTB + Velociti 3.5R or 4.5R speedo/motor combo
Nomadio V2 transceivers (sensors not required)
PM offers/questions
Looking for new project(s).
Selling a Serpent Impact World Champ '02 4wd semi-complete chassis.
Needs front shock tower, throttle linkage, engine/pipe/Rx/Battery.
I got it on eBay last year, without shocks, to complete, but have no time/desire. I will include NIB sealed Serpent RCC shocks for it, which are like $75-100 alone! Has a tower mg/bb steering servo, fail-safe, and throttle servo. full centax clutch setup (this is like $75 alone) + big-block engine mounts w/proper screws included. Porsche 962 (kinda' raggedy) body included. $165 shipped
Might be convinced to sell my other Impact - standard 4wd non-WC version.
needs nothing but your rx, and fuel! This was built, tuned, and raced by Roniel of Serpent USA.
Brand new shoes on it (Ellegi 37's F & R) Novarossi ER15 big-block 15, THS pipe, can throw in a fail-safe if you use analog. This thing runs like a scalded dog with that ER-15! If you've never run a 1/10 235mm car, you don;t know what you're missing! Includes a ragged Lola body. Comes with a few misc spares, like some arms, rear belt, and I forget what else.
$350 shipped
Might sell my GS SUT - no body/wing, but comes with a spare-parts-chassis.
RB TM-728 7-Port .28, tires are fine, runs like I stole it. Engine fires up on 2/3 pulls every time. Can be bump-started as well. $250 shipped
Might also sell a Kyosho FW-05T. Stock GXR-15. I think the PS sticks, but I bump-start everything. basically stock except for center shafts, shocks (off a FW-05RR),and a JR throttle servo. This was the readyset with pre-painted Ferrari body, which has *NEVER* been run on the car. I can throw the Kyosho radio back in.....but WHY? You're welcome to in anyhow. has about 4 break-in tanks, plus about 4 running tanks run though it, so it's pretty usable! I can also toss in some spares, and mebbe some FW-05RR upgrades for it..I probably also have all manuals for it, as well. $165 shipped ConUS?
Now, I won't sell ALL of these - I would prefer, say, to sell the GS SUT, the Impact WC '02, and FW-05Tto fund the EP project.
I'd entertain trade offers for what I'm looking for...
Speaking of which...What I'm looking for:
EP cars (In order of preference):
Tamiya F201 F1 electric car
M18 Pro w/ or without Mamba brushless setup
CRC recent-age 1/12
Robitronics Scalpel
other stuff:
Novak GTB + Velociti 3.5R or 4.5R speedo/motor combo
Nomadio V2 transceivers (sensors not required)
PM offers/questions
Last edited by sharkonwheels; 04-14-2007 at 11:26 PM.
04-11-2007, 12:23 PM
#2
Here's Pics.
First is the GS, next is the parts chassis it comes with.
Third is the standard Serpent Impact 4wd with the ER15. Ran it this weekend, so it needs a bath
Fourth is the Serpent Impact 4WD World Champ '02 edition. I forgot pics of the clutch setup/engine mounts, but they are included.
Last is the Kyosho FW-05T. I'll get a pic of the Ferrari body tonight - totally forgot to take it. I shot these pix as I was running out the door...
First is the GS, next is the parts chassis it comes with.
Third is the standard Serpent Impact 4wd with the ER15. Ran it this weekend, so it needs a bath
Fourth is the Serpent Impact 4WD World Champ '02 edition. I forgot pics of the clutch setup/engine mounts, but they are included.
Last is the Kyosho FW-05T. I'll get a pic of the Ferrari body tonight - totally forgot to take it. I shot these pix as I was running out the door...
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
