WTT: Heavily-modded EMaxx for TMaxx/Revo/Savage or equiv.
02-07-2007, 04:30 PM
#1
WTT: Heavily-modded EMaxx = TRADED!!!
After much thought and sleepless nights, I'm looking to finally part with my EMaxx It's heavily modified, ready for a BL set-up. I INTENDED on getting a BL setup for it, but other projects came about, and I somewhat lost interest
Here is pics of the EMaxx I have for possible trade.
(RPM body mount now replaced w/ brand new stock one
)
THE LIST OF UPGRADES INCLUDE:
- Unlimited Engineering Titanium CVDs
- UE Titanium center shafts
- UE Titanium diff. drive cups all-around
- Integy Diff housings
- Integy Bulkheads
- Integy shock towers
- Integy bulk braces
- Powerstroke Shocks
- UE 2mm Titanium skids (Fr, Cen, Rr)
- Integy Alum. chassis braces
- New body mounts (pay no attention to the old RPM mount (blue)
- Upgraded/strengthened A-arms (wide; forgot manufacturer)
- New 550 Titan motors (3, maybe 4 runs on them)
I also have ALL the stock parts that were replaced with hop-ups, to include stock rims/tires. EVX is sealed with silicone around the heatsinks and has Deans on the batt. Connectors. Will include 2x 3300mah NiMHs that you see. as well as 2x brand-spankin' new Tenergy 3500mah NiMH stick packs with no cycles on them yet. Also will come with Traxxas TQ3 system and Team Futaba TP-S3010 HT/HS steering servo.
I am in-search of a 2.5 or 3.3 "mild-to-wild" modded nitro MT to replace the hole in my heart that this baby will leave
Plz feel free to PM me, or email me @ [email protected] with what you have, and PICS. Do NOT just reply because I never check up on my threads, and often overlook replies. I have very good feedback here, Ebay, and many other R/C forums. Thank you.
Here is pics of the EMaxx I have for possible trade.
(RPM body mount now replaced w/ brand new stock one
)THE LIST OF UPGRADES INCLUDE:
- Unlimited Engineering Titanium CVDs
- UE Titanium center shafts
- UE Titanium diff. drive cups all-around
- Integy Diff housings
- Integy Bulkheads
- Integy shock towers
- Integy bulk braces
- Powerstroke Shocks
- UE 2mm Titanium skids (Fr, Cen, Rr)
- Integy Alum. chassis braces
- New body mounts (pay no attention to the old RPM mount (blue)
- Upgraded/strengthened A-arms (wide; forgot manufacturer)
- New 550 Titan motors (3, maybe 4 runs on them)
I also have ALL the stock parts that were replaced with hop-ups, to include stock rims/tires. EVX is sealed with silicone around the heatsinks and has Deans on the batt. Connectors. Will include 2x 3300mah NiMHs that you see. as well as 2x brand-spankin' new Tenergy 3500mah NiMH stick packs with no cycles on them yet. Also will come with Traxxas TQ3 system and Team Futaba TP-S3010 HT/HS steering servo.
I am in-search of a 2.5 or 3.3 "mild-to-wild" modded nitro MT to replace the hole in my heart that this baby will leave
Plz feel free to PM me, or email me @ [email protected] with what you have, and PICS. Do NOT just reply because I never check up on my threads, and often overlook replies. I have very good feedback here, Ebay, and many other R/C forums. Thank you.
Last edited by XXWoodmanXX; 02-07-2007 at 07:18 PM.
02-07-2007, 05:59 PM
#2
email sent
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
