Stuff has GOT to go - emergency need $$$ ASAP
#1
Stuff has GOT to go - emergency need $$$ ASAP
Got an emergency happening.
My wife has been in the hospital 3 days now. Need the money, so if you want/need any of it, let me know. She's had 2 blood transfusion already, and the bill is still going nowhere but up. Unfortunately, RC's is where I have ao of my $$$ invested.
I'm NOT asking for charity - I just need people that want my stuff, to buy my stuff. I am NOT looking for a handout.
Thread 1 is here:
http://www.rctech.net/forum/showthread.php?t=126287
Thread 2 is here:
http://www.rctech.net/forum/showthread.php?t=126267
Everything is in fine working order, if not, it WILL be mentioned, and described accurately and honestly.
I also have a Serpent Impact 4WD, Porsche 962 body, NovaRossi ER-15 engine. I believe I have a brand-new set of tires to go with it. This is in FINE running order, just needs a cleaning. Everything included except receiver and Rx pack. I can include a batt-pack, but the drive-belt has hit it a couple times, and the wire is a little frayed.
Asking $300 shipped in the ConUS.
GS Storm SUT, great condition, a few spares. Includes an RB TM728 which I think needs a pinch, as compression is a little weak. Engine crankcase has been ground down a little on the ins, to get it to mount with the factory engine mounts. Included is an almost toally complete 2nd SUT chassis, that only has a bent steering plate (replacement included) and front hinge-pin block (again, I think I have a spare to include). ALso includes the manual, some upgrades not yet installed, like alloy front hinge-pin brace, etc. Manual is included, but I do not have a body. $400 shipped for both chassis's, ConUS
The GS SUT is pretty clean, tires are great. The only things I think are missing from the 2nd chassis, are the wheel adapters, tires, and a rear bumper. I believe I even have the factory engine mounts for it!
Also have a Kyosho FW-05RR with a TON of 3Racing hop-ups, like the CF quick-change gearbox, aluminum center drive shafts, plus a whole 2nd chassis (disassembled into parts) as spares, plus a ton of spares brand-new in bags. This has a Peak Diablo .12, Maxy modified, plus a spare brand-new piston/sleeve set. also includes a 90% condition Rx pack. $350/shipped for the whole batch!
Still got the Savage SS 4.6 in the first thread mentioned near the beginning of this posting.
I'm not online much right now, because I'm at the hospital 20 out of 24 hours/day (got 2 kids, so I'm split between home and hospital), so if you have any questions, email tonymbb at compusource dot net, and it'll be forwarded to my blackbery, and I'll respond back.
Thanks!
Tony
My wife has been in the hospital 3 days now. Need the money, so if you want/need any of it, let me know. She's had 2 blood transfusion already, and the bill is still going nowhere but up. Unfortunately, RC's is where I have ao of my $$$ invested.
I'm NOT asking for charity - I just need people that want my stuff, to buy my stuff. I am NOT looking for a handout.
Thread 1 is here:
http://www.rctech.net/forum/showthread.php?t=126287
Thread 2 is here:
http://www.rctech.net/forum/showthread.php?t=126267
Everything is in fine working order, if not, it WILL be mentioned, and described accurately and honestly.
I also have a Serpent Impact 4WD, Porsche 962 body, NovaRossi ER-15 engine. I believe I have a brand-new set of tires to go with it. This is in FINE running order, just needs a cleaning. Everything included except receiver and Rx pack. I can include a batt-pack, but the drive-belt has hit it a couple times, and the wire is a little frayed.
Asking $300 shipped in the ConUS.
GS Storm SUT, great condition, a few spares. Includes an RB TM728 which I think needs a pinch, as compression is a little weak. Engine crankcase has been ground down a little on the ins, to get it to mount with the factory engine mounts. Included is an almost toally complete 2nd SUT chassis, that only has a bent steering plate (replacement included) and front hinge-pin block (again, I think I have a spare to include). ALso includes the manual, some upgrades not yet installed, like alloy front hinge-pin brace, etc. Manual is included, but I do not have a body. $400 shipped for both chassis's, ConUS
The GS SUT is pretty clean, tires are great. The only things I think are missing from the 2nd chassis, are the wheel adapters, tires, and a rear bumper. I believe I even have the factory engine mounts for it!
Also have a Kyosho FW-05RR with a TON of 3Racing hop-ups, like the CF quick-change gearbox, aluminum center drive shafts, plus a whole 2nd chassis (disassembled into parts) as spares, plus a ton of spares brand-new in bags. This has a Peak Diablo .12, Maxy modified, plus a spare brand-new piston/sleeve set. also includes a 90% condition Rx pack. $350/shipped for the whole batch!
Still got the Savage SS 4.6 in the first thread mentioned near the beginning of this posting.
I'm not online much right now, because I'm at the hospital 20 out of 24 hours/day (got 2 kids, so I'm split between home and hospital), so if you have any questions, email tonymbb at compusource dot net, and it'll be forwarded to my blackbery, and I'll respond back.
Thanks!
Tony
#2
how much for the spare almost completed chassis?
#5
Speedy: I assume you speak of the GS SUT.
I got it for $125 from here, so gimme, say, $110 shipped, and I'll
throw in the new steering plate, but I don't have the hing-pin block.
Front right corner is broken. They're like stupid cheap, though, like
$5/pair on ebay or something like that. It may be short bearings for the knuckles, but I think I can toss in a few brand-new ones that I have for it.
The motor mount is there, along with the screws, and I believe the servo screws and blocks are also there. I can probably even throw in an exhaust, so all yo would need is engine/x/Rx pack/servo's, plus the hub/extender thingies with the pins, mount wheels/tires, and you should be golden.
Lemme take pics tomorrow, and I'll post 'em for ya. I don;t like doing blind deals when I buy, and I like people I sell to to not have to do that either!
Tony
I got it for $125 from here, so gimme, say, $110 shipped, and I'll
throw in the new steering plate, but I don't have the hing-pin block.
Front right corner is broken. They're like stupid cheap, though, like
$5/pair on ebay or something like that. It may be short bearings for the knuckles, but I think I can toss in a few brand-new ones that I have for it.
The motor mount is there, along with the screws, and I believe the servo screws and blocks are also there. I can probably even throw in an exhaust, so all yo would need is engine/x/Rx pack/servo's, plus the hub/extender thingies with the pins, mount wheels/tires, and you should be golden.
Lemme take pics tomorrow, and I'll post 'em for ya. I don;t like doing blind deals when I buy, and I like people I sell to to not have to do that either!
Tony
#12
Jack - PM sent. Went nowhere Monday, and I forgot the batMgr Tuesday, although I remembered to print your address, to take a box, packing material, tape....
<sigh> Anyways, Sent it USPS Priority Mail, insured to $50.
Insurance receipt # is VE 807 380 486 US
Thanks again!
Tony
<sigh> Anyways, Sent it USPS Priority Mail, insured to $50.
Insurance receipt # is VE 807 380 486 US
Thanks again!
Tony