Getting out of Electric R/C for now
#1
Tech Regular
Thread Starter
Everything must go...Getting out of Electric R/C for now
I am getting out of R/C for awhile being that I don’t
have the time to do it anymore, and for health reasons.
I will be selling all of my stuff so, look through the list
and see if anything is of interest.
The Following is up for sell:
Electronics
Novak GT7 $75
(Recently rewired, and has original box)
Airtronics MX-3 FM #90 $75
Hitec HS-645MG High-Torque $25
6 cell 3300’s (4 packs total) $75
Two ProMatch packs, SMC 30amp, Novak. In
addition to the four race packs are 4 Lightspeed packs.
Included with the batteries is a Team Trinity Battery Case
Tools
Team Associated Body Scissors $5
Dynamite 5 piece Nut Drivers $10
Integy Spring Post Wrench (New) $5
Losi SAE Hex Wrenches $20
All wrenches are in great shape none are stripped,
and also comes with original case.
Team Trinity Hood Alignment Tool (New) $10
have the time to do it anymore, and for health reasons.
I will be selling all of my stuff so, look through the list
and see if anything is of interest.
The Following is up for sell:
Electronics
Novak GT7 $75
(Recently rewired, and has original box)
Airtronics MX-3 FM #90 $75
Hitec HS-645MG High-Torque $25
6 cell 3300’s (4 packs total) $75
Two ProMatch packs, SMC 30amp, Novak. In
addition to the four race packs are 4 Lightspeed packs.
Included with the batteries is a Team Trinity Battery Case
Tools
Team Associated Body Scissors $5
Dynamite 5 piece Nut Drivers $10
Integy Spring Post Wrench (New) $5
Losi SAE Hex Wrenches $20
All wrenches are in great shape none are stripped,
and also comes with original case.
Team Trinity Hood Alignment Tool (New) $10
Last edited by RH Customs; 05-03-2006 at 10:55 AM.
#2
Tech Regular
Thread Starter
Support Equipment
Team Cobra Pro Com Lathe $100
(Includes a P2K2 for drive motor and 4cell 3300 Trinity pack)
ICE Charger and $85
The charger comes with all the original accessories, manual,
original box, cables, and the temp sensor.
Eagle/Integy 10amp 13 max psu $40
The power supply also has the original box.
Team Novak Smart Tray $45
Integy 20 amp fast discharger $10
Motors (Includes all the motors and Trinty bag) $50
Lot of motors mostly 19specs. 4 C2’s
(2 are working Motors, the other two are cans),
2 Reedy Quad Mags (Cans Only), ect. The motors
will also come in a Team Trinity Motor Bag.
Team Cobra Pro Com Lathe $100
(Includes a P2K2 for drive motor and 4cell 3300 Trinity pack)
ICE Charger and $85
The charger comes with all the original accessories, manual,
original box, cables, and the temp sensor.
Eagle/Integy 10amp 13 max psu $40
The power supply also has the original box.
Team Novak Smart Tray $45
Integy 20 amp fast discharger $10
Motors (Includes all the motors and Trinty bag) $50
Lot of motors mostly 19specs. 4 C2’s
(2 are working Motors, the other two are cans),
2 Reedy Quad Mags (Cans Only), ect. The motors
will also come in a Team Trinity Motor Bag.
Last edited by RH Customs; 05-01-2006 at 06:26 PM.
#3
Tech Regular
Thread Starter
My TC4 Roller Only No electronics $200
I will also be selling my TC4 Team kit. There are
quite a few hop-ups.
Here is a list of hop ups the car has:
Factory Team Pivot blocks all the way around.
Also includes -2.0 toe, as well as -3.0 rear toe blocks
Factory Team Blue Woven Graphite Strap
Factory Team Battery Strap Thumb Screws
(also a second set NIP)
Factory Team Clamping Hex Drives
Factory Screw Kit
Complete set of Lunsford turnbuckles
Extra Parts
There are several diffs, steel, plastic, and aluminum.
A few sets of front and rear arms
Complete Factory Team Shock Set
And some other misc extras, gears, lubes, shock oil, and other little parts.
Currently I’m running a front one-way, and a rear diff with steel AE outdrives.
There are to many items for me to put pictures of everything. Send me a PM, or email if you would like more information or pictures.
Thanks for Looking
RH
I will also be selling my TC4 Team kit. There are
quite a few hop-ups.
Here is a list of hop ups the car has:
Factory Team Pivot blocks all the way around.
Also includes -2.0 toe, as well as -3.0 rear toe blocks
Factory Team Blue Woven Graphite Strap
Factory Team Battery Strap Thumb Screws
(also a second set NIP)
Factory Team Clamping Hex Drives
Factory Screw Kit
Complete set of Lunsford turnbuckles
Extra Parts
There are several diffs, steel, plastic, and aluminum.
A few sets of front and rear arms
Complete Factory Team Shock Set
And some other misc extras, gears, lubes, shock oil, and other little parts.
Currently I’m running a front one-way, and a rear diff with steel AE outdrives.
There are to many items for me to put pictures of everything. Send me a PM, or email if you would like more information or pictures.
Thanks for Looking
RH
Last edited by RH Customs; 05-02-2006 at 06:31 PM.
#4
YGM
#5
Tech Regular
Thread Starter
Make sure to check often on this thread. I'm fairly sure I have some more stuff still looking.
Thanks
RH
Thanks
RH
#6
Guys,
RH takes EXCELLENT care of his gear! Do not worry about anything with this gear! Everything will be in tip-top shape. He is very maticulous when it comes to his stuff! Plus, he is a great guy and knows his R/C!
Good luck with the sale bro!
PD2
RH takes EXCELLENT care of his gear! Do not worry about anything with this gear! Everything will be in tip-top shape. He is very maticulous when it comes to his stuff! Plus, he is a great guy and knows his R/C!
Good luck with the sale bro!
PD2
#7
Tech Regular
Thread Starter
Just to let everyboy know, I will be taking pictures of everything Tuesday.
Thanks
RH
Thanks
RH
#10
Tech Regular
Thread Starter
I forgot to mention, all prices are before shipping. As for payment I accept paypal and money order.
Thanks
RH
Thanks
RH
Last edited by RH Customs; 05-02-2006 at 08:34 AM.
#11
Tech Regular
Thread Starter
NIP Robison Racing Products 22 tooth pinion. $2
Deans Ultra Plug (1 male and 1 female) NIP $2
Dean Ultra Plug (4 females) NIP $4
RH
Deans Ultra Plug (1 male and 1 female) NIP $2
Dean Ultra Plug (4 females) NIP $4
RH
#12
Tech Regular
Thread Starter
Make sure to check all my descriptions. I will be updating my descriptions on parts as I find more items.
Thanks
RH
Thanks
RH
#14
Tech Regular
Thread Starter
All PM's and emails have been answered.
Thanks
RH
Thanks
RH
#15
Tech Master
iTrader: (65)
If the Losi wrenches are the ones that fit the kits.. I'll take them. PLease email me at [email protected]
Thanks,
Thanks,