WTT: Tamiya 415MS
#1
Tamiya 415MS
Its offroad season so I figure now is as good a time as any to swap out my car. This thing has been taken care of perfectly. I am very anal about my cars ask anybody that races with me. Included with the car will be a few NIP spares and lots of tuning and option parts. I have a locked center pulley and the front oneway installed now I also have a front yokomo diff for it. I also have 4 of each spring type (red, yellow, blue, white) and I also have a pair of the purple and grey super hard springs. The shocks on the car are brand new and have the knurled ends. I replaced the entire shock set and put the old ones on my TA05. I will have to go through my box and list and take pics of all the spares but you should be able to run this car for a while without needing anything I just put my spare set of belts on so they are new but I don't have spares. Here are some pics as I said I will list stuff later, no electronics, but can include the GT7 for a few extra bucks or for another speedo. The only bad part of the car is the PO didn't seal the chassis properly so the very back had the corners splinter a bit and he also put a little slot in the chassis removing a screw. It does not affect the car, but if its an issue we can figure something out.
Oh yeah I'm looking for a Team Losi JRXS in equally good condition with some spares,option parts and full spring kit.
Would sell outright for $275 shipped I will only consider offers for trades or for sale from the lower 48.
If anyone is interested I can take a bunch more pictures
Oh yeah I'm looking for a Team Losi JRXS in equally good condition with some spares,option parts and full spring kit.
Would sell outright for $275 shipped I will only consider offers for trades or for sale from the lower 48.
If anyone is interested I can take a bunch more pictures
Last edited by GroffBall; 04-24-2006 at 12:25 PM.
#4
Matt keeps his stuff in A1 shape. Great guy to deal with.
#6
Heres the List:
On the car:
Stainless & Titanium Screws
stainless hinge pins in arms
Blue countersunk washers
Special Edition TRF shocks
Florine coated ball ends
Square front bumper
46mm swing shafts (alum. rear)
Locked center Pulley
100t PRS spur
Blue Alum. Sway ends
Blue Alum. Ant. Mount
6mm Clamp wheel hexes
Yellow Springs
1A Bridge, 1A, 1X, 1B Susp. Mounts
0* Tamiya Aluminum Hub Carriers
3 Hole Pistons
Tamiya One Way
Extras:
Stock Front Bumper
Rear Arms x5
Front Arms x2
Front Tower
2* Hub Carriers x2
4* Hub Carriers
Front Knuckles x6
1 set + 2 Left side 1* composite uprights
Extra Body Mounts
Complete set of Sway Bars
1.5* Square alum. uprights
2 Hole Pistons
Misc. Shock Parts
Extra Steel, titanium and aluminum turnbuckles
Hinge Pins
1D Bridge, 1D x 3, 1C, 1X supsension Blocks
springs: burgandy, grey x2, white x2, blue x2, yellow x3, red x2
Yokomo Front diff w/ tamiya diff ring reinforcements
Speedtech, and tamiya spool with custom steel outdrives
Extra diff bearings
4mm aluminum clamp wheel hexes
Steel stub axle
top deck
NIP:
51101 Ball head king pin(pair) x2
51099 2.6mm x25mm screw pin x2
51098 2.6 x22mm screw pin
51100 Flange tube
51105 rear upright
? Front Knuckles
51104 Suspension arms x2
51106 Hub Carrier 2*
On the car:
Stainless & Titanium Screws
stainless hinge pins in arms
Blue countersunk washers
Special Edition TRF shocks
Florine coated ball ends
Square front bumper
46mm swing shafts (alum. rear)
Locked center Pulley
100t PRS spur
Blue Alum. Sway ends
Blue Alum. Ant. Mount
6mm Clamp wheel hexes
Yellow Springs
1A Bridge, 1A, 1X, 1B Susp. Mounts
0* Tamiya Aluminum Hub Carriers
3 Hole Pistons
Tamiya One Way
Extras:
Stock Front Bumper
Rear Arms x5
Front Arms x2
Front Tower
2* Hub Carriers x2
4* Hub Carriers
Front Knuckles x6
1 set + 2 Left side 1* composite uprights
Extra Body Mounts
Complete set of Sway Bars
1.5* Square alum. uprights
2 Hole Pistons
Misc. Shock Parts
Extra Steel, titanium and aluminum turnbuckles
Hinge Pins
1D Bridge, 1D x 3, 1C, 1X supsension Blocks
springs: burgandy, grey x2, white x2, blue x2, yellow x3, red x2
Yokomo Front diff w/ tamiya diff ring reinforcements
Speedtech, and tamiya spool with custom steel outdrives
Extra diff bearings
4mm aluminum clamp wheel hexes
Steel stub axle
top deck
NIP:
51101 Ball head king pin(pair) x2
51099 2.6mm x25mm screw pin x2
51098 2.6 x22mm screw pin
51100 Flange tube
51105 rear upright
? Front Knuckles
51104 Suspension arms x2
51106 Hub Carrier 2*
#10
MATT IS A STAND UP TAMIYA NUT. HE SORTED OUT MY 05 I SOLD TO HIM THEN GAVE IT BACK FOR DIRT TO RUN AND ENJOY.
HE ALSO GIVES DEALS, AND THIS IS JUST ANOTHER STUPID GOOD DEAL.
BUY W/OUTRIGHT CONFIDENCE IF TAMIYA IS UR FLAVOR
-ULT
HE ALSO GIVES DEALS, AND THIS IS JUST ANOTHER STUPID GOOD DEAL.
BUY W/OUTRIGHT CONFIDENCE IF TAMIYA IS UR FLAVOR
-ULT