U.S. Vintage Trans-Am [PICS & PAINT Discussion ONLY!!!]
#4651
Looks good!!!!
Next time dont take the overspray film off and just cut out what you want in matte or flat and peel that section of the overspray film off then paint. Once your done pull all the film off and you are done no need to do all the extra masking when its all done for you at the start.
Next time dont take the overspray film off and just cut out what you want in matte or flat and peel that section of the overspray film off then paint. Once your done pull all the film off and you are done no need to do all the extra masking when its all done for you at the start.
#4652
I have used the over spray film as a mask as well. The grill was a booger to mask from the inside on my HPI 68 Camaro and I didn't want to use the decals so I trimmed that area out and sprayed the black on the outside.
#4653
Tech Elite
iTrader: (9)
For you VTA Outlaws who saw my decals for the McAllister IROC Camaro - I've refined the grill to simulate the earlier body style (even though the body has the slope instead of the blunt nose) - IMHO it came out pretty cool -
For you Non VTA Outlaws - you'll have to lobby RobK to be able to use THIS body w/ THESE decals (and don't forget to modify the rear window mask so it doesn't look like the Wrap Around REAR Window when you paint one. (I Painted this originally to replicate a Dirt Oval Car)
For you Non VTA Outlaws - you'll have to lobby RobK to be able to use THIS body w/ THESE decals (and don't forget to modify the rear window mask so it doesn't look like the Wrap Around REAR Window when you paint one. (I Painted this originally to replicate a Dirt Oval Car)
#4654
Fast and Loud is one of my favorite shows! Love that paint job!
#4656
65 Mustang GT350 owners....Did paint your bumbers chrome/silver????
If so how did you do it??
And what paint did you use????
If so how did you do it??
And what paint did you use????
#4657
#4658
The roll bars on this truck body I did from the outside. Sprayed them with Faskolor. Shot white first lightly, then Chrome Silver. Trying to carefully cut the liquid mask from the inside on this would have been painful.
#4659
Looks good....way over my skill level. My one attempt with liquid mask did not turn out well.....
I think I will buy a extra body and send it to you!!!!
I think I will buy a extra body and send it to you!!!!
#4660
Tech Addict
A rattle can quickie...
I like to mix and match whatever colors I have laying around to come up with something unique.
I think this one is...
This was a light layer of white pearl followed by fluorescent yellow topped with the last reserves of Pactra Inca Gold.
I call it Butterscotch metallic!
Lighting doesn't do it justice. All of it looks like the shiny parts in the top picture.
I think this one is...
This was a light layer of white pearl followed by fluorescent yellow topped with the last reserves of Pactra Inca Gold.
I call it Butterscotch metallic!
Lighting doesn't do it justice. All of it looks like the shiny parts in the top picture.
#4661
#4662
Tech Master
iTrader: (5)
I like to mix and match whatever colors I have laying around to come up with something unique.
I think this one is...
This was a light layer of white pearl followed by fluorescent yellow topped with the last reserves of Pactra Inca Gold.
I call it Butterscotch metallic!
Lighting doesn't do it justice. All of it looks like the shiny parts in the top picture.
I think this one is...
This was a light layer of white pearl followed by fluorescent yellow topped with the last reserves of Pactra Inca Gold.
I call it Butterscotch metallic!
Lighting doesn't do it justice. All of it looks like the shiny parts in the top picture.
#4665
That looks really great Crispy! Nice job. And, the stripes set it off too. I think you will really like running that body. I sure do. Holds up really well also. If it was ORANGE, it might be a little faster. But, butterscotch will do.