Short Course Dirt Oval late model set ups
#1
Short Course Dirt Oval late model set ups
Im running a Sc10 Late model on clay ovals and looking for set up ideas. Has anybody tried the different caster hubs on the rear?
#2
Tech Fanatic
iTrader: (101)
Setup
One thing you can do is take the inner hingpin out and redrill a hole where the screw that holds the pin in. Then move the pin to the new location and use a 440 screw in the original hole to hold it in. Do this on the rr only. It will give you around 0 toe on the rr and will make it turn way better. You can also get higher rate springs from rc4less as the offroad springs are soft for oval.
#3
caster is generally on the front end of the car unless you might possibly have 4 wheel steering.
You may be referring to toe which the previous poster told you a simple way to reduce that. Generally you will be running stiffer springs than the average off-road kit springs. It really depends on your track.
You may be referring to toe which the previous poster told you a simple way to reduce that. Generally you will be running stiffer springs than the average off-road kit springs. It really depends on your track.
#4
sorry your right I was talking toe, I seen some different hubs Like 1/2 or 1 I was wondering if those would be better than the regular sc set up.
#5
Tech Rookie
short course dirt oval late model setups
Is anyone running a xxx sct ? I am new to oval racing and im looking for some basic setup help to get me started. I will be running a late model class
#6