losi xxxt cr

gkn0315 · 05-14-2009, 09:41 AM

hi looking for a good starting point for this truck help will be apprietated thanks in advance

gkn0315 · 05-15-2009, 06:00 PM

bump no one can help a brother out ?

Matt Sunderlage · 05-17-2009, 11:12 PM

I assume you are going to run this truck on an oval???

How deep into the rabbit hole do you want to go??????

I have speed-T shock towers and body mounts on mine. You have to internally limit the shocks so droop stays similar to "kit". Depending on rules you can run a stock cr body or Speed-T body with a side dam or McCalister Outlaw-T body.

Hopes this helps.......

rced1 · 05-18-2009, 07:51 AM

Most of this thread still applies to the CR:

http://www.dirtoval.com/forums/showt...ight=xxx+setup

gkn0315 · 05-18-2009, 09:29 PM

thanks any more help out there?

racerx1920 · 05-21-2009, 09:30 PM

if your running dirt oval get your self some new truck wheels and some buggy rear tires, i ran hole shots and glue the buggy tires on the truck weels. then you will have a low profile tire. you loose alot of your side wall flax you would normaly get if you run the standard off road tires and it looks really cool.

i also cut off a few coils off the springs to get the ride hight a low as i could without hitting the track (need a little stiffer spring to hold the truck up) i had the hardest spring losi makes for that truck and 100 weight oil in the right rear, helped with rotation in the middle of the turn.