|
Novarossi ISON 7 port tuned .21
http://i1294.photobucket.com/albums/...psihzn1dhv.jpg
http://i1294.photobucket.com/albums/...pseabkjmxx.png http://i1294.photobucket.com/albums/...pswbrnagg3.jpg http://i1294.photobucket.com/albums/...psvkzk3qnq.jpg This is a pic of the crank on the new Novarossi ISON tuned 7port Balanced 14 mm factory tuned crank , steel bearings, and a killer price I saw this motor run by Paolo Morganti and Vincent Jackson at the Byron's challenge in Joliet. The motor had killer power and excellent run time ... |
Originally Posted by Phil Trotta
(Post 13385461)
http://i1294.photobucket.com/albums/...psihzn1dhv.jpg
http://i1294.photobucket.com/albums/...pseabkjmxx.png http://i1294.photobucket.com/albums/...pswbrnagg3.jpg http://i1294.photobucket.com/albums/...psvkzk3qnq.jpg This is a pic of the crank on the new Novarossi ISON tuned 7port Balanced 14 mm factory tuned crank , steel bearings, and a killer price I saw this motor run by Paolo Morganti and Vincent Jackson at the Byron's challenge in Joliet. The motor had killer power and excellent run time ... |
Originally Posted by kyosho malaysia
(Post 13387265)
are they running with the stock version?
|
Originally Posted by Phil Trotta
(Post 13388400)
This version is what was run
|
Originally Posted by kyosho malaysia
(Post 13389066)
have you did comparison between yr ISON with theirs
|
Originally Posted by Phil Trotta
(Post 13389131)
This weekend. I will be running this engine . If you meant were they running a team version.... I believe not. They ran engine in same form
|
Originally Posted by kyosho malaysia
(Post 13389357)
i'm not mean team version,they may do some mod themselves
|
Phil were they on par with the older Kangaroos?
|
Its basically the Kangaroo with a slightly different crank and cooling head. Same Piston/Liner/Rod/Crankcase/Carb etc as the Kangaroo. It is in all intents and purposes simply an update to the Kangaroo Sydney WC engine which has now been discontinued.
|
Originally Posted by Serpent-Dan
(Post 13390027)
Phil were they on par with the older Kangaroos?
That's what led me to pick one up. |
Thanks Phil
|
Originally Posted by Phil Trotta
(Post 13390935)
Vincent did some of the fastest laps in the a main at Byron's as well as his qualifying with this engine and had excellent run time to boot
That's what led me to pick one up. |
Originally Posted by dan_vector
(Post 13390197)
Its basically the Kangaroo with a slightly different crank and cooling head. Same Piston/Liner/Rod/Crankcase/Carb etc as the Kangaroo. It is in all intents and purposes simply an update to the Kangaroo Sydney WC engine which has now been discontinued.
|
Ok so I ran this motor in a little ... About 3/4 gallon of fuel. Even from the first tanks you could feel this motor is a contender
We leaned motor down a little. Left it slightly rich and I can say I'm very Happy with the engine Motor was running in the 240 temp range still slightly rich and has very good bottom end and pulls all the way through the top Will finish running in today see how it qualifies The motor made 5:30 on a track that is not easy to make 5 min runtime. This was with the supplied 8.5 restrictor and 2015 pipe with short header |
Originally Posted by Phil Trotta
(Post 13395643)
Ok so I ran this motor in a little ... About 3/4 gallon of fuel. Even from the first tanks you could feel this motor is a contender
We leaned motor down a little. Left it slightly rich and I can say I'm very Happy with the engine Motor was running in the 240 temp range still slightly rich and has very good bottom end and pulls all the way through the top Will finish running in today see how it qualifies The motor made 5:30 on a track that is not easy to make 5 min runtime. This was with the supplied 8.5 restrictor and 2015 pipe with short header |
| All times are GMT -7. It is currently 12:43 PM. |
Powered By: vBulletin v3.9.3.8
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.