MEGA (by Picco) thread
#1231
Tech Elite
iTrader: (89)
Mega 2607 pipe & header
I recently mounted this pipe(Mega-2607) to my MTX-4. But the shape of the header positions my pipe too far away from the chassis. My pipe and springs take a beating being so far away from the chassis. Is there a different syle header that keeps the pipe closer to the chassis.
#1232
does anyone knows part number of o-ring that goes inside crankcase of ZX12? Exploded view only shows the one that fit on carb body
thanks
thanks
#1233
Tech Rookie
Hi - can anyone help!?!? Re: ZX21 DSI
I have a ZX21 DSI - i bought it second hand, and after about 5 tanks, the conrod went. had to replace the piston and sleeve too - and on the new engine have just run it in. i REALLY dont want this one to go so quick this time as i cant keep affording to replace the whole lot!! SO.... could anyone out there who has had experience with this engine tell me what the ideal running temp range is - as i have just bought a temp gun to try and prevent me letting it overheat - but it aint much good cause i cant find what the running temp should be of this engine anywhere!!
Thanks alot!!!!
I have a ZX21 DSI - i bought it second hand, and after about 5 tanks, the conrod went. had to replace the piston and sleeve too - and on the new engine have just run it in. i REALLY dont want this one to go so quick this time as i cant keep affording to replace the whole lot!! SO.... could anyone out there who has had experience with this engine tell me what the ideal running temp range is - as i have just bought a temp gun to try and prevent me letting it overheat - but it aint much good cause i cant find what the running temp should be of this engine anywhere!!
Thanks alot!!!!
#1234
Leon, the DSI is know for it's problems with the conrod.
Keep the engine on the rich side on the LSN, and try to run it not hotter then 100-110C /210-230F
Replace the conrod every 3 liters of fuel.....
Do you know how many liters or gallons of fuel allready went through the engine? because the crankshaft wears to and might come to a point where changing the conrod isn't enough anymore....
Keep the engine on the rich side on the LSN, and try to run it not hotter then 100-110C /210-230F
Replace the conrod every 3 liters of fuel.....
Do you know how many liters or gallons of fuel allready went through the engine? because the crankshaft wears to and might come to a point where changing the conrod isn't enough anymore....
#1235
Tech Elite
iTrader: (12)
Leon, the DSI is know for it's problems with the conrod.
Keep the engine on the rich side on the LSN, and try to run it not hotter then 100-110C /210-230F
Replace the conrod every 3 liters of fuel.....
Do you know how many liters or gallons of fuel allready went through the engine? because the crankshaft wears to and might come to a point where changing the conrod isn't enough anymore....
Keep the engine on the rich side on the LSN, and try to run it not hotter then 100-110C /210-230F
Replace the conrod every 3 liters of fuel.....
Do you know how many liters or gallons of fuel allready went through the engine? because the crankshaft wears to and might come to a point where changing the conrod isn't enough anymore....
#1239
MEGA/REDDOT
Fellas I have a MEGA ZX12 tht isnot running anymore and I purchased a REDDOT today.....Do any of u kno if I would b able to use the lower profile heatsink from the MEGA on the REDDOT? being tht there both PICCO thanks!
#1241
thanks......If heat becomes a prob I guess I'll hav to go bac to the stock Cooling head
#1242
Tech Adept
#1244
Because Picco is earning enough money from OFNA, the engine's produced for Serpent (Mega), Ielasi (IDM), and Solaroli, are hard to get, and probably not there 1st priority.....
Hopefully in the near future Picco will step up the process, and deliver more engines to these 3 clients.
Certainly because 2 other engine brands (will not mention names here ) are having issue's at the moment, it is a good time to have these Picco based engines on stock in the LHS......
Hopefully in the near future Picco will step up the process, and deliver more engines to these 3 clients.
Certainly because 2 other engine brands (will not mention names here ) are having issue's at the moment, it is a good time to have these Picco based engines on stock in the LHS......
#1245
picco crankcase for zx21 sport ?
is any of the picco crankcase can fit the zx21 sport ?
a friend of mine had just broke the conrod during practice and the rod went straight thru the crankcase. Anybody tried swaping the zx21 sport crankcase with a picco one ?
a friend of mine had just broke the conrod during practice and the rod went straight thru the crankcase. Anybody tried swaping the zx21 sport crankcase with a picco one ?