MEGA (by Picco) thread
#931
Tech Fanatic
Originally Posted by SnakeEyz
Does anyone know what the pros and cons are to running the Novarossi carb on the ZX-12 I ve seen this in pictures of people cars and was wondering if the engine performed better this way
RC_Alan
Last edited by rc_alan; 07-18-2006 at 09:19 PM.
#932
Originally Posted by Rookie Solara
Does anyone know what is the stock needle setting for the ZX-15 (not 12) engine...? Need to redo the whole setting for the 835 for the upcoming Chicago Mid West Series........thanks guys.
If using on 835 running Centax 2 clutch, do I need to place the 0.5mm shim before the collet? Am I suppose to use the black MEGA collet or the gold colored one from Nova Rossi type? Thanks again...
P.S...Zx15 needle setting same as Zx12?
If using on 835 running Centax 2 clutch, do I need to place the 0.5mm shim before the collet? Am I suppose to use the black MEGA collet or the gold colored one from Nova Rossi type? Thanks again...
P.S...Zx15 needle setting same as Zx12?
#936
Tech Initiate
settings
Originally Posted by Rookie Solara
And do you know what the setting will be on ZX12? Thanks........
A starting point for zx12 on 16% nitro would be -
0.4mm head shims
LSN 6 turns out- HSN 5 turns out- idle to suit
#937
Originally Posted by Rookie Solara
And do you know what the setting will be on ZX12? Thanks........
#938
Originally Posted by Kendall
Now here is the real question you might want to try.... Does the conrod from your DSII fit on the crankshaft of your DSI?
But, I believe the answer is allready given.....
#939
Tech Elite
iTrader: (12)
Hey guys, I got the chance to see a DSII in action this weekend and I am extremely impressed with it performance. The engines being ran at my track range from DSI(what I run) all the way to Murnan Mod 35 plus 21's and everything in between. That DSII revs up so fast and it just kept pulling. The only thing that was faster was a Murnan 35 plus 21 but it wasn't a blow out. $600 vs. $300 ........................... I'll be running a DSII at WinterNats 2007.
#940
Originally Posted by quietstorm76
The only thing that was faster was a Murnan 35 plus 21 but it wasn't a blow out. $600 vs. $300 ........................... I'll be running a DSII at WinterNats 2007.
Also the Ninja engines give nice affordable performance.......
There is 1 thing though I think, a DSII, will not last as long as a 35-21.... (for Ninja I really can tell)
BUT, also a Nova based engine can have a faillure, and then you are glad you saved some bucks.....
#942
There have been some issues with the Mega engines, that's something we should not forget, but I am convinced that most of these problems are related to user errors.....
The Mega engines need to be tuned a little different, and if you don't do that.......
They also need a little more maintenance, and if you don't do that......
just my 2 cents.....
The Mega engines need to be tuned a little different, and if you don't do that.......
They also need a little more maintenance, and if you don't do that......
just my 2 cents.....
#943
Is the .12 DSII released yet? If so, how much is it?
#944
#945
Thanks MH7.
There goes the price advantage of the Mega engines.
I know that the Border is pretty expensive, but the DSII is now more expensive than Novarossi's new Plus12-3.
There goes the price advantage of the Mega engines.
I know that the Border is pretty expensive, but the DSII is now more expensive than Novarossi's new Plus12-3.