darn it agian i need quick help
#1
darn it agian i need quick help
ok i haev gotten my hyper .21 8 port through 2 tanks of fuel now with no problems in between
so i figure ok put fuel in it and drive well now it dont want to start
ok what it does is if u pull once it goes rraaeerrrr it just like a quick little start so i wait 5 more secs it does the same thing every five seconds u pull
ok if i pull non stop it does nothing i just pull my arm out
i tried richening it up een trying to heat it with a heat gun and it pulls just the same and does teh same thing as without a heat gun
if i lean it it does nothing at all really
i have all my needles to break in settings right now because i turned them back to get help
i would love to get this thing running before late tomorrow when the snow is gone
i am not tryign to start it in the cold btw i am starting it in a warm house on the back porch which is heated
so i figure ok put fuel in it and drive well now it dont want to start
ok what it does is if u pull once it goes rraaeerrrr it just like a quick little start so i wait 5 more secs it does the same thing every five seconds u pull
ok if i pull non stop it does nothing i just pull my arm out
i tried richening it up een trying to heat it with a heat gun and it pulls just the same and does teh same thing as without a heat gun
if i lean it it does nothing at all really
i have all my needles to break in settings right now because i turned them back to get help
i would love to get this thing running before late tomorrow when the snow is gone
i am not tryign to start it in the cold btw i am starting it in a warm house on the back porch which is heated
#3
well its 70 on the back porch and the fuel should be fine
i dont haev to heat the motor i tried that and it dont help me now
it did for the first tank but not now
i dont haev to heat the motor i tried that and it dont help me now
it did for the first tank but not now
#4
help please
#6
ok i did go back to the new settings before u all could help and btw it worked all the stuff was charged and the plug was brand new
but we gotta new problem the one way seems like its skipping when its inside the motor when it ake it outs the motor its fine
but we gotta new problem the one way seems like its skipping when its inside the motor when it ake it outs the motor its fine
#7
come on people help a brother out
the one-way looks fine the shaft is fine
the one-way looks fine the shaft is fine
#8
also can u tell me if it is normal for a pullstart to go out this quickly mines been rebuilt numerous times
and the motor has only had a bout 3 1/2 tanks on it
and the motor has only had a bout 3 1/2 tanks on it
#10
no i cannot use a starter box it is in a savage ss
#12
ok i will try that but they are already clean i will just have ot clean some more
also i wanted help because i have no money to buy a new pullstart
also i wanted help because i have no money to buy a new pullstart
#13
It seem Your engine is rich, Try this setting:
-HSN 3 turns out from closed
-LSN 3/4 turn out from flush with throtle body
-Midrange Flush
Mine was pulling wheelie with this setting...
(Slipper clutch 1/8 turn out,OS A5 plug,Gammalube 25%)
As for the one way You can clean it with gasoline then spray with WD40
Hope this help...
-HSN 3 turns out from closed
-LSN 3/4 turn out from flush with throtle body
-Midrange Flush
Mine was pulling wheelie with this setting...
(Slipper clutch 1/8 turn out,OS A5 plug,Gammalube 25%)
As for the one way You can clean it with gasoline then spray with WD40
Hope this help...