Nitro powered weed eater motor.
#1
Nitro powered weed eater motor.
Has any one set up and run a weed eater motor on Nitro for an extended period of time with reliability? At what A/F ratio does Nitro burn the best. If I am not mitaken a gasoline engine runs best at 14:1. Any help would be great.
#2
R/C Tech Founder
This may get more replies if I move it to the correct forum.
#3
idk what is best for weed wacker but heck, try it out and see!
as soon as we get a new one my friend and I are going to run one at WOT running on nitro, and wait for it to blow.
as soon as we get a new one my friend and I are going to run one at WOT running on nitro, and wait for it to blow.
#4
I already have done that on my one an only weedeater. It did not like it to well. Only because the carb is tuned for straight 2 cycle gas. it ran really well at only one throttle position. I am just trying to figure out whether of not I need to richen or lean the carb.
#5
the only ideas I have is try it richer and try it leaner. IF those dont work ad some straight gas to the nitro fuel you are using.
#7
My plans are to hop up one of those mini motorcycles on Nitro or one of those little scooters. That would be sweet I think.
#8
Originally posted by GrandeGixxer
I believe methanol/alcohol it more rich in oxygen so I would say you would need to richen it up some. I know when we ran go karts with the Briggs motors(years ago) we would need to run bigger jets providing a richer mixture.
I believe methanol/alcohol it more rich in oxygen so I would say you would need to richen it up some. I know when we ran go karts with the Briggs motors(years ago) we would need to run bigger jets providing a richer mixture.
When you raced with these motor's did you ever spin out, And have the motor fire up in reverse.
#10
Guest
i know the heli guys who use gas ignition engines will run colemans kerosean (sp) that is normally used for camping lanterns and grills
#11
Tech Rookie
Ran my weedeater on nitro!
Ran mine on 20% blue thunder nitro fuel! works pretty well , gives it a tonnnnn more power. just realllly need to richen the mixture, it doesnt need as much air to burn as the gas does. i can cut really tall grass and it doesnt hardly bogg down at all any more and its only like a 26cc engine. cheap troy bilt, id never put it in my stihl though haha.