Mugen X12 engine info.
04-20-2010, 08:00 PM
#1
Mugen X12 engine info.
Just bought an MTX4 w/X12 engine. Not very familiar about this engine. Is this similar to the Mugen MR12? I'd like to know the running temp. glow plug, how much head shims i need for 30% nitro. Any other info. about this engine is very much appreciated. Thanks.
04-20-2010, 08:32 PM
#2
I believe that for 30%, you should use 0.5mm shimms. And a #7 glow plug. I remember those engines screaming from 250 to 280. But this will all depend on the pipe you use, weather and fuel.
04-21-2010, 02:02 AM
#3
Its a very very old Novarossi engine. Almost 5-6 years old. It was top of the line back then. Its similar to a NSR.
I believe that for 30%, you should use 0.5mm shimms. And a #7 glow plug. I remember those engines screaming from 250 to 280. But this will all depend on the pipe you use, weather and fuel.
I believe that for 30%, you should use 0.5mm shimms. And a #7 glow plug. I remember those engines screaming from 250 to 280. But this will all depend on the pipe you use, weather and fuel.
04-21-2010, 03:09 PM
#4
Its a very very old Novarossi engine. Almost 5-6 years old. It was top of the line back then. Its similar to a NSR.
I believe that for 30%, you should use 0.5mm shimms. And a #7 glow plug. I remember those engines screaming from 250 to 280. But this will all depend on the pipe you use, weather and fuel.
I believe that for 30%, you should use 0.5mm shimms. And a #7 glow plug. I remember those engines screaming from 250 to 280. But this will all depend on the pipe you use, weather and fuel.
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
