Palmaris engine thread
#1396
Re: Re: another Good Result for BRB
Originally posted by Top Gun 777
Hey Chris. Somebody still have 1st generation alive?
It is one more prove that number of ports and moddings on them (as tear drops, cuts, polishing etc) don't metter for performance. Right angles, right tapering and right materials on sleeve and piston-those are the keys for power, the rest is just marketing.
Edward
Hey Chris. Somebody still have 1st generation alive?
It is one more prove that number of ports and moddings on them (as tear drops, cuts, polishing etc) don't metter for performance. Right angles, right tapering and right materials on sleeve and piston-those are the keys for power, the rest is just marketing.
Edward
changed the conrod and the crankshaft once because it was old Max crankshaft when we first fitted.
no tear drop, no cuts, just stock original 3 ports.
#1398
Tech Master
Re: Re: Re: another Good Result for BRB
Originally posted by kitracer
Yes, still 1st generation. funny he complaint that still use 1st gen but his engine is still fast and stable so we did not care.
changed the conrod and the crankshaft once because it was old Max crankshaft when we first fitted.
no tear drop, no cuts, just stock original 3 ports.
Yes, still 1st generation. funny he complaint that still use 1st gen but his engine is still fast and stable so we did not care.
changed the conrod and the crankshaft once because it was old Max crankshaft when we first fitted.
no tear drop, no cuts, just stock original 3 ports.
#1399
Re: Re: Re: Re: another Good Result for BRB
Originally posted by cow buster
3 port against .15 engines
3 port against .15 engines
Here is the qualify result, ( thanks for the camera man)
In fact, our BRB should have TQ instead of Second in qaulify, but the so call TQ car with MAX15 did not have enough fuel to run the last lap HOWEVER the pitman walk over the sensor with his car.
Guess what , the orgainiser is the pitman!!!!
#1401
Our web site is already partly operational and will be updated and finished within a day or two. My son working intensevely to finish it. Thaks Leo-realy good work!!!!! Finishe it please faster.
www.palmarisracing.com
Edward
www.palmarisracing.com
Edward
#1404
Tech Addict
iTrader: (4)
ps12 with the centax clutch
I recently got an mtx3 so I want to put my ps12 in it. It used to be in my ntc3, I have to put at least 3 shims behind the collet. I probably could use at least one more. Is this usual? I only need 1 with my Rb. It looks like the ps12 has an extra thread or 2 on the crank compare to the rb.
Thanks
Thanks
#1405
Re: ps12 with the centax clutch
Originally posted by CHUCKMANDO
I recently got an mtx3 so I want to put my ps12 in it. It used to be in my ntc3, I have to put at least 3 shims behind the collet. I probably could use at least one more. Is this usual? I only need 1 with my Rb. It looks like the ps12 has an extra thread or 2 on the crank compare to the rb.
Thanks
I recently got an mtx3 so I want to put my ps12 in it. It used to be in my ntc3, I have to put at least 3 shims behind the collet. I probably could use at least one more. Is this usual? I only need 1 with my Rb. It looks like the ps12 has an extra thread or 2 on the crank compare to the rb.
Thanks
#1408
Tech Adept
Ed
Hello Ed,
Congratulation on your web page !!
So when the whole package, i.e crankshaft, Bi metal P/S, rod and button head be available ? Got two spare nova rossi crankcases waiting.....PM with further info if possible...never the less the 1st generation BRB set is still going strong and well, hence waiting for the next level of performance !!!!
Thanks
philip
Philip
Congratulation on your web page !!
So when the whole package, i.e crankshaft, Bi metal P/S, rod and button head be available ? Got two spare nova rossi crankcases waiting.....PM with further info if possible...never the less the 1st generation BRB set is still going strong and well, hence waiting for the next level of performance !!!!
Thanks
philip
Philip
#1409
Re: Ed
Hi Philip.
The Bi-Metal sets wont be available for some time yet. There is still a lot of testing to be done to make sure they are perfect.
Will you be at Mendip next weekend? Should be a good meeting. Look me up. Will be pitting in with Lee and Martin.
The Bi-Metal sets wont be available for some time yet. There is still a lot of testing to be done to make sure they are perfect.
Will you be at Mendip next weekend? Should be a good meeting. Look me up. Will be pitting in with Lee and Martin.
Originally posted by xtreme888
Hello Ed,
Congratulation on your web page !!
So when the whole package, i.e crankshaft, Bi metal P/S, rod and button head be available ? Got two spare nova rossi crankcases waiting.....PM with further info if possible...never the less the 1st generation BRB set is still going strong and well, hence waiting for the next level of performance !!!!
Thanks
philip
Philip
Hello Ed,
Congratulation on your web page !!
So when the whole package, i.e crankshaft, Bi metal P/S, rod and button head be available ? Got two spare nova rossi crankcases waiting.....PM with further info if possible...never the less the 1st generation BRB set is still going strong and well, hence waiting for the next level of performance !!!!
Thanks
philip
Philip
#1410
Originally posted by Top Gun 777
Hi guys. We do have available turbo head bottons for .12 Novas based engines.
Edward
Hi guys. We do have available turbo head bottons for .12 Novas based engines.
Edward