STS engines
#122
Originally posted by 20 SMOKE
look at the STS pipe its only $40, one piece pipe its very durable saw a car that got hit on the pipe side didnt make a mark on it
look at the STS pipe its only $40, one piece pipe its very durable saw a car that got hit on the pipe side didnt make a mark on it
#123
Originally posted by Thunder racer
i still have all the stock shims on it. Im running 16% nitro.
And the back straight is about 70-80 metres. i think its around that.
i still have all the stock shims on it. Im running 16% nitro.
And the back straight is about 70-80 metres. i think its around that.
#124
Originally posted by Top Gun 777
Very interesting moding done on.. caliper! is that Mitutoyo modded by STS?
Please send me some STS stekers and I garranty I will put on my tools them!
Very interesting moding done on.. caliper! is that Mitutoyo modded by STS?
Please send me some STS stekers and I garranty I will put on my tools them!
#125
and if hec is not in stock, what do you think about the pipes I own (Sirio and Nova), or Hong Nor X12?
#126
Originally posted by tonimccloud
and if hec is not in stock, what do you think about the pipes I own (Sirio and Nova), or Hong Nor X12?
and if hec is not in stock, what do you think about the pipes I own (Sirio and Nova), or Hong Nor X12?
I only have problem with LD3's stock pipe(come with box).abnormal back pressure and hard to adjust.Also it is a bit too long so fit for small tight track.Some people use it and feel not enough top-end,so just lean it and lean it till....engine die.Then blame STS suck....
#127
Originally posted by dino.tw
Nothing can not be hidden to your eyes.....
Nothing can not be hidden to your eyes.....
So, are going to send me some stikers? Or I have to buy whole engine?
#128
sts rs5 bearing size?
hey srry to get off subjecti just wanted to know what he 2 bearing sizes are in the engine because i am going to replace them with ceramic bearings. One more question does the d5 6.5mm carb fit in the rs5 and is it worth buying?
#129
Re: sts rs5 bearing size?
Originally posted by STS211
hey srry to get off subjecti just wanted to know what he 2 bearing sizes are in the engine because i am going to replace them with ceramic bearings. One more question does the d5 6.5mm carb fit in the rs5 and is it worth buying?
hey srry to get off subjecti just wanted to know what he 2 bearing sizes are in the engine because i am going to replace them with ceramic bearings. One more question does the d5 6.5mm carb fit in the rs5 and is it worth buying?
I have tested Boca on my STS for a while and work fine.
If your crank case is black old version,the new carb can't fit.
#130
i have the newer rs5 with the silver case. so its all good?
#131
Originally posted by STS211
i have the newer rs5 with the silver case. so its all good?
i have the newer rs5 with the silver case. so its all good?
#132
About breaking the engine in.
I am going to be using 20% nitro fuel. Do i really need to change the head shims to 0.4mm?
#134
Tech Initiate
Originally posted by jscamry
The STS pipe are still in production, I posted a question about the pipes on Teamcrc.com, and John replied that they are still being made and in stock. Since I am planning on getting one.
thanks Jason
The STS pipe are still in production, I posted a question about the pipes on Teamcrc.com, and John replied that they are still being made and in stock. Since I am planning on getting one.
thanks Jason
Great Stuff !!