Murnan Modified Motors
#2311
Ill definitely give it a try next season, if my race schedule goes as I planned.
Which brands of fuel do you use with success? Only some of the brands are availible in our country.(Mugen, Merlin, Byron, Morgan, and some other poor brands.)
Is this engine T9 based or R3 based? First you wrote R3, and than you changed it as T9 on the website.
Which pipe-manifolt combinations work best on this motor?
Thanks for your replies, and as I heard from other people, your comments shouldnt be for selling stuff... I want to believe.
Which brands of fuel do you use with success? Only some of the brands are availible in our country.(Mugen, Merlin, Byron, Morgan, and some other poor brands.)
Is this engine T9 based or R3 based? First you wrote R3, and than you changed it as T9 on the website.
Which pipe-manifolt combinations work best on this motor?
Thanks for your replies, and as I heard from other people, your comments shouldnt be for selling stuff... I want to believe.
#2312
i still have my M353R for this season, i only raced it once and then cleaned it, oiled it and back into the bag. 1 race = 1 National champioship
cheers
Ali
#2313
Ill definitely give it a try next season, if my race schedule goes as I planned.
Which brands of fuel do you use with success? Only some of the brands are availible in our country.(Mugen, Merlin, Byron, Morgan, and some other poor brands.)
Is this engine T9 based or R3 based? First you wrote R3, and than you changed it as T9 on the website.
Which pipe-manifolt combinations work best on this motor?
Thanks for your replies, and as I heard from other people, your comments shouldnt be for selling stuff... I want to believe.
Which brands of fuel do you use with success? Only some of the brands are availible in our country.(Mugen, Merlin, Byron, Morgan, and some other poor brands.)
Is this engine T9 based or R3 based? First you wrote R3, and than you changed it as T9 on the website.
Which pipe-manifolt combinations work best on this motor?
Thanks for your replies, and as I heard from other people, your comments shouldnt be for selling stuff... I want to believe.
i have run byrons and j-tech and i am pretty sure uriah uses rocket science and j-tech my rb m3 was really fast ojn 16% and run time is outstanding.
#2314
hi Uriah,
in the break-in "idle method", it suggests
-to run rich idle at approximately 7000rpm
-run the car at the track at approximately 14000rpm
any suggestion on how an average joe can hit the rpm mark?
i understand it doesn't necessarily mean hit it exactly right but i don't wanna overdo things especially at break-in. when at the throttle, i just don't have any idea what rpm i'm running
t-i-a
in the break-in "idle method", it suggests
-to run rich idle at approximately 7000rpm
-run the car at the track at approximately 14000rpm
any suggestion on how an average joe can hit the rpm mark?
i understand it doesn't necessarily mean hit it exactly right but i don't wanna overdo things especially at break-in. when at the throttle, i just don't have any idea what rpm i'm running
t-i-a
#2315
hi Uriah,
in the break-in "idle method", it suggests
-to run rich idle at approximately 7000rpm
-run the car at the track at approximately 14000rpm
any suggestion on how an average joe can hit the rpm mark?
i understand it doesn't necessarily mean hit it exactly right but i don't wanna overdo things especially at break-in. when at the throttle, i just don't have any idea what rpm i'm running
t-i-a
in the break-in "idle method", it suggests
-to run rich idle at approximately 7000rpm
-run the car at the track at approximately 14000rpm
any suggestion on how an average joe can hit the rpm mark?
i understand it doesn't necessarily mean hit it exactly right but i don't wanna overdo things especially at break-in. when at the throttle, i just don't have any idea what rpm i'm running
t-i-a
During break in my clutch engages just after idle. At 14,000rpm my car will be moving less than 5 mph with lots of smoke at full throttle.
#2317
Hey Uriah,
Congrats on making the A main in the 1/10 roar nats way to go man, i was following you through Liverc.com, i saw you were 5th/6th up to 50 minutes from the race time, then you started loosing positions, what happened man?? anyways, congrats again, man making the A main is just amazing, tell us how the NT1 since its your first major event with it?
cheers
Ali
P.S. i recieved the 2 engines today, they look sweet
Congrats on making the A main in the 1/10 roar nats way to go man, i was following you through Liverc.com, i saw you were 5th/6th up to 50 minutes from the race time, then you started loosing positions, what happened man?? anyways, congrats again, man making the A main is just amazing, tell us how the NT1 since its your first major event with it?
cheers
Ali
P.S. i recieved the 2 engines today, they look sweet
#2318
Tech Addict
iTrader: (11)
Uriah A-main!
He had moved up to 6th and was solid at that point. Thought he had a glitch but he was loosing the front belt. At 53 min in, the front belt broke and he was done. Still, he felt great about running so well, but always have to be a little disappointed for not finishing. Fuel mileage was excellent, 5.10 was very solid and 5.20 was possible. We kept him safe after the first tank at 5.12. We had time to play with after that.
#2319
Hey Uriah,
Congrats on making the A main in the 1/10 roar nats way to go man, i was following you through Liverc.com, i saw you were 5th/6th up to 50 minutes from the race time, then you started loosing positions, what happened man?? anyways, congrats again, man making the A main is just amazing, tell us how the NT1 since its your first major event with it?
cheers
Ali
P.S. i recieved the 2 engines today, they look sweet
Congrats on making the A main in the 1/10 roar nats way to go man, i was following you through Liverc.com, i saw you were 5th/6th up to 50 minutes from the race time, then you started loosing positions, what happened man?? anyways, congrats again, man making the A main is just amazing, tell us how the NT1 since its your first major event with it?
cheers
Ali
P.S. i recieved the 2 engines today, they look sweet
www.murnanmodified.com
Congratulations to my team drivers that made the A main.
Bobby Flack
Scotty Gray
Chrus Doseck
Tommy Desantis
Myself
#2320
Hey Uriah,
man 5 cars in the Amain run Murnan Modified engines thats a record mate,
congrats to you and all your team drivers again.
cheers
Ali
man 5 cars in the Amain run Murnan Modified engines thats a record mate,
congrats to you and all your team drivers again.
cheers
Ali
#2321
It was great to finaly meet you sunday. Especially after watching your run to bump up to the final. Great driving. And thanks for the decals and manifold.
#2323
#2324
Yes, that is a record for us. We were all running the RBM3 in the X-RAY NT-1 chassis. It is amazing how much power you can lay down with the NT1. The car is dialed.
#2325
Tommy D
Last edited by RCAKid; 09-10-2009 at 06:23 PM.