Collari XS 200 problems please help
#2
Tech Initiate
HSN 5 full turns from close
LSN 3.25 turns from close
the mid needle should be flush with the carb casing
take the carb off, put some sealant around the o rings and pinch bolt, refit the carb.
i did notice on my engine that the front bearing leaked around the shaft, to fix this i simply used some bearing fix liquid, high temp, medium strength.
LSN 3.25 turns from close
the mid needle should be flush with the carb casing
take the carb off, put some sealant around the o rings and pinch bolt, refit the carb.
i did notice on my engine that the front bearing leaked around the shaft, to fix this i simply used some bearing fix liquid, high temp, medium strength.