Rossi LS1 .21 onroad
#2
I have used several Rossi engines in the past, and was excited to see a new importer & new engines. I tried the LS1. VERY disapointed. Worst quality machining I have seen, very low-tech design of piston/sleave etc., Poor fit of all components, if that weren't enough, the engine has NO power!
#3
do you have a link for this engine on the net??
#4
#5
Originally Posted by duneland
if that weren't enough, the engine has NO power!
#6
I ran the engine... It has less power than ANY 21 on-road engine I have tried & that is quite a few.
#10
Tech Addict
iTrader: (1)
That's strange...in our group, there's at least about a dozen Maranello's, and not a problem. We run 'em hard, and when we get hardcore, we'll dump 60% boat fuel in 'em, and they run like a scalded dog. They REALLY respond well to tuning, also. We mostly run 'em in HPI Racer 2 and Super Nitro chassis' with .21 conversions, and 37T/26T gearing for top-speed runs.
Only complaint we really have, is the Rossi carbs are finicky as hell.
Only complaint we really have, is the Rossi carbs are finicky as hell.
#11
Hello
Hello we are the new distributers of the Rossi Line of Engines we will be on hear evryday adressing any problems with the line of motors,the name of our company is Tq Fuel.We are also going to be working closley with two well nown tuners to work all the kinks out with the motors,Richey Mods and Eb Mods.
For the gentleman that was not happy with his engine please send me a private email and we will help you with that engine we want all of our customers that have been using the rossi line to be happy.
We Have a website and will uploading all info about the motors,www.TQFUEL.COM.
For the gentleman that was not happy with his engine please send me a private email and we will help you with that engine we want all of our customers that have been using the rossi line to be happy.
We Have a website and will uploading all info about the motors,www.TQFUEL.COM.
#12
I'm trying to breakin this motor when the wheather is right so anyone has any comments on breaking in this engine?? Checked the carb setting straight out from the box is 3 1/2 turn out for top needle and 2 1/2 turn out for the low end. Is this the factory setting??
Thanks,
Thanks,
#13
Originally Posted by mrx
I'm trying to breakin this motor when the wheather is right so anyone has any comments on breaking in this engine?? Checked the carb setting straight out from the box is 3 1/2 turn out for top needle and 2 1/2 turn out for the low end. Is this the factory setting??
Thanks,
Thanks,
#14
mrx
hows that 960 is it ready for and out of state race ?
hows that 960 is it ready for and out of state race ?