Who re pinches engines and ship worldwide?
05-30-2016, 01:07 AM
#1
Who re pinches engines and ship worldwide?
I need to re pinch a reds r7 after around 3-4 gallons (!!)
Ive tried to contact a couple but with no respond.
Anyone knows who to contact and if they ship worldwide?
Ive tried to contact a couple but with no respond.
Anyone knows who to contact and if they ship worldwide?
05-30-2016, 02:24 AM
#2
Rex from RW Mods does a great job pinching my engines, and he ships worldwide. His name on these forums is 22Racer, it would be best to send him an email at [email protected]
www.rw-mods.com
www.rw-mods.com
05-30-2016, 09:52 AM
#3
Tech Master
RayAracing.com is the original, the expert, the number 1 guy. Why use 2nd best when you can use the market leader with the most experience, the original.
05-30-2016, 06:36 PM
#4
Ray A Racing is why there is even a engine pinching business. He is simply my and engine builders go to guy. He builds a pinching system people can buy. Rex may be good but I have not used him.
05-31-2016, 12:57 AM
#5
I've been pretty satisfied work RcRenew.com I put the whole engine in a box and ship it. Lance calls me a couple of days later and tells me what it needs, pinches it etc, puts it back together and sends it back. Worldwide shipping no idea, but a phone call or email frm the website should get u the info. I haven't tired the other guys, but I'm sure they're good too. I just really like the idea of not having to take my engine apart to get the p/s/r out to send.
06-01-2016, 05:34 AM
#6
06-01-2016, 05:53 AM
#7
As others have pointed out, stick with people that use Ray's equipment. That means Ray himself or I believe both RW and RCrenew use his stuff as well.
06-01-2016, 02:17 PM
#8
www.rwmods.com
Rex
06-01-2016, 03:48 PM
#9
Tech Master
The equipment used is only part of it, the years of experience and results provided is what counts.
I have sent scratched up, horrible pistons where engines have had sand get in, and RayA have given them a slight polish and made it work as good as new.
For this reason, I wholeheartedly recommend RayAracing.com as the number 1 in the resize-market. He has the most experience (done it longest) and the most knowhow (understands how to make it work).
I have sent scratched up, horrible pistons where engines have had sand get in, and RayA have given them a slight polish and made it work as good as new.
For this reason, I wholeheartedly recommend RayAracing.com as the number 1 in the resize-market. He has the most experience (done it longest) and the most knowhow (understands how to make it work).
06-01-2016, 07:46 PM
#10
Ray did the same for me. He made it real nice.
06-02-2016, 05:29 PM
#13
I do not use Ray's equipment, I developed my own. A friend of ours has one of Ray's tools and I just dont feel using an arbor press is accurate enough for me. With mine i can dial in even the smallest adjustment.
www.rwmods.com
Rex
www.rwmods.com
Rex
06-02-2016, 07:34 PM
#14
Tech Fanatic
iTrader: (23)
Join Date: Nov 2002
Location: 4373 Creek Road Chaffee,NY 14030 USA (716)783-5198
Posts: 831
Trader Rating: 23 (100%+)
RayAracing Reconditioning-Reaizing Service
The equipment used is only part of it, the years of experience and results provided is what counts.
I have sent scratched up, horrible pistons where engines have had sand get in, and RayA have given them a slight polish and made it work as good as new.
For this reason, I wholeheartedly recommend RayAracing.com as the number 1 in the resize-market. He has the most experience (done it longest) and the most knowhow (understands how to make it work).
I have sent scratched up, horrible pistons where engines have had sand get in, and RayA have given them a slight polish and made it work as good as new.
For this reason, I wholeheartedly recommend RayAracing.com as the number 1 in the resize-market. He has the most experience (done it longest) and the most knowhow (understands how to make it work).
Just completed a 16 set order for Richard out of Parkville NY whom feels the same way. 16 piston&sleeve sets with improved sealing surface finish condition and new designed fit, return ships tomorrow 😉
Last edited by RayA; 06-02-2016 at 07:36 PM. Reason: spell
06-03-2016, 07:25 AM
#15
I started with just a .21 set from Ray 8 years ago but 2 months later made my own design tooling for 12 to .28 size engines.
I just found a way I think works better to me so I made my own tooling.
But just stick with the guys who you like and you will be good.
It is like giving 5 guys a hammer and material and telling him to build a house. Even if the similar tools, always because of the skill of the guy behind the tools outcomes will differ and one will be better than the others.
I just found a way I think works better to me so I made my own tooling.
But just stick with the guys who you like and you will be good.
It is like giving 5 guys a hammer and material and telling him to build a house. Even if the similar tools, always because of the skill of the guy behind the tools outcomes will differ and one will be better than the others.