MikeTinCT

iTrader: (1)

Weekend warrior here, just dug the Losi 3.0T out of the basement, needs a new clutch and I'm not sure what I should go with. Buddy wants to get into racing so i'm going to do my best.

Need new shoes, flywheel and prolly a new clutch bell.

Let me know your thoughts.

token

TLR9101 TLR Pre-Built Aluminum 4 Shoe Clutch
LOSA9125 - Losi 12T High Endurance Clutch Bell
LOSA9103 - Losi 4 Shoe Clutch Nut & Hardware Set
LOSA6356 - Losi 5mm/6mm Metric Shim Set

You can also but the flywheel, clutch shoes and pin separately.

Jerm13

iTrader: (36)

Yup... Losi clutch. very easy to use, tune and get parts for. Buku is also good, but can be harder to get parts if your LHS doesn't stock em..

MikeTinCT

iTrader: (1)

Would you suggest any different shoes or is the aluminum and composite the way to go?

token

aluminum and composite - Ive tried all alum, but it seems like it gets way to hot an cause slippage.

Jerm13

iTrader: (36)

Very true.... I have been running the vented Losi bells that LutzRC sells. They seem to help a lot when running an all aluminum. But I only do that on higher traction surfaces. Mainly aluminum and composite like you said... with green and gold springs.