Go-Tech Engines Thread
#1
Go-Tech Engines Thread
Hi All
We have a Go Tech engines thread in the exclusive nitro engines area in on road but we would like to have one in off road too for all your general questions and set up information for your GO Tech
Cheers MM
We have a Go Tech engines thread in the exclusive nitro engines area in on road but we would like to have one in off road too for all your general questions and set up information for your GO Tech
Cheers MM
Last edited by MassiveMods; 12-30-2010 at 01:00 PM.
#2
I want to be one of the first to say go tech engines are amazing! I was wondering...I bought a used mit mod 7port go tech and am gonna race in a big race in september and was wondering if I am still eligable for the contengincy program even though I dont have a reciept?
Thanks
-Drew
Thanks
-Drew
#3
Tech Fanatic
iTrader: (8)
Yes i would also be interested in a contingency program.
I bought a 5 port Go Tech off Darren @ http://www.rchobbyzone.com.au/Location.php
I ran My Go Tech at the Whyalla interclub meeting on Sunday and came 3rd in my class.
Although my tune was off slightly i found this motor to have massive bottom end and reved very high and produced good power.
If there was a contingency program i would consider running these motors on a permanent basis and help give them the good name they deserve.
http://www.users.on.net/~danzig/Picture%20069.jpg Powered by Go Tech.
I bought a 5 port Go Tech off Darren @ http://www.rchobbyzone.com.au/Location.php
I ran My Go Tech at the Whyalla interclub meeting on Sunday and came 3rd in my class.
Although my tune was off slightly i found this motor to have massive bottom end and reved very high and produced good power.
If there was a contingency program i would consider running these motors on a permanent basis and help give them the good name they deserve.
http://www.users.on.net/~danzig/Picture%20069.jpg Powered by Go Tech.
Last edited by GenReaper; 08-15-2007 at 02:01 AM.
#4
Hey everyone unfortunately the contingency program is not put on by the mfgr. but it is put on by the U.S. dist and so its only currently available in the U.S.
Drew as long as you have the Racefactor Industries sticker properly assembled on your car you will be eligible.
Drew as long as you have the Racefactor Industries sticker properly assembled on your car you will be eligible.
#5
I was wondering if there was a way to get those stickers mailed to me? I would need them in the next 2 weeks if possible!
Thanks
-Drew
Thanks
-Drew
#6
Tech Elite
iTrader: (7)
#7
Yeah Drew you can reach me thru email at that website and I can set you up with some stickers.
Also I would like to point out something about the Go Engines and current customers already know, These engine get good run time and will run with anything on the track they have also proven to have a very good lifespan, but the absolute best thing about a Go engine that can't be denied is the powerband is amazingly strong and linear, There is no flat spots it just hits and pulls all the way to the top. When I first tested the Go's that is what sold me more than anything. First i come from an electric racing and when i got into Nitro I ran the Italian mills and the power band left a lot to be desired but I just figured that it was just the way Nitro is, When I ran the Go its the closest any Nitro engine has felt to electric to me. Having a consistant smooth powerband really makes these engines perfect for racing.
This powerband I feel is the main reason the Go engine owners have been so happy with their purchase. But don't go by what I say Let the current owners tell you what they think.
Also I would like to point out something about the Go Engines and current customers already know, These engine get good run time and will run with anything on the track they have also proven to have a very good lifespan, but the absolute best thing about a Go engine that can't be denied is the powerband is amazingly strong and linear, There is no flat spots it just hits and pulls all the way to the top. When I first tested the Go's that is what sold me more than anything. First i come from an electric racing and when i got into Nitro I ran the Italian mills and the power band left a lot to be desired but I just figured that it was just the way Nitro is, When I ran the Go its the closest any Nitro engine has felt to electric to me. Having a consistant smooth powerband really makes these engines perfect for racing.
This powerband I feel is the main reason the Go engine owners have been so happy with their purchase. But don't go by what I say Let the current owners tell you what they think.
#8
Yes i would also be interested in a contingency program.
I bought a 5 port Go Tech off Darren @ http://www.rchobbyzone.com.au/Location.php
I ran My Go Tech at the Whyalla interclub meeting on Sunday and came 3rd in my class.
Although my tune was off slightly i found this motor to have massive bottom end and reved very high and produced good power.
If there was a contingency program i would consider running these motors on a permanent basis and help give them the good name they deserve.
http://www.users.on.net/~danzig/Picture%20069.jpg Powered by Go Tech.
I bought a 5 port Go Tech off Darren @ http://www.rchobbyzone.com.au/Location.php
I ran My Go Tech at the Whyalla interclub meeting on Sunday and came 3rd in my class.
Although my tune was off slightly i found this motor to have massive bottom end and reved very high and produced good power.
If there was a contingency program i would consider running these motors on a permanent basis and help give them the good name they deserve.
http://www.users.on.net/~danzig/Picture%20069.jpg Powered by Go Tech.
Go here. http://www.racefactorindustries.com/
#9
Tech Fanatic
iTrader: (8)
WOW! That thing is sweet. Are you sure you even rACE that thing? It looks like its never seen dirt.lol. JK, looks good.
Im not sure if the stickers are available to everyone though. Like Ive seen them on eBay coming out of China but I dont think they are eligible for the contingency program. but like kamlooper says you can check with them at RACEFACTORINDUSTRIES. Well, get your engine NOW and GO race and win because they are HOT produce crazy power and will make you win races. Have fun guys.
Im not sure if the stickers are available to everyone though. Like Ive seen them on eBay coming out of China but I dont think they are eligible for the contingency program. but like kamlooper says you can check with them at RACEFACTORINDUSTRIES. Well, get your engine NOW and GO race and win because they are HOT produce crazy power and will make you win races. Have fun guys.
GO Tech is in the background, lol :] Also and Older .25CXP Go tech and boy did that have some balls, I hope they bring out a .28 ill put one straight in my basher car, awsome engines IMO.
http://www.users.on.net/~danzig/Race1.jpg
http://www.users.on.net/~danzig/DSCF2832.JPG
http://www.users.on.net/~danzig/DSCF2834.JPG
Here it is in action, it was a bit lean and had a slight bog at stages "learning to tune :] ", but it pulls like a monster and i love my Go Tech.
http://www.zone3adelaide.com/rcmovie...0round%203.wmv 18 meg, enjoy. You know what it looks like, just look for the car doing barrel rolls GG to Paul Savage for the video. The first part that you see is actualy my Nosram " LRP" engine but that later part i plonked the Go Tech in and it hammered
My question would be are they gonna bring out a .28 motor ?
Ive been running Massive Mods fuel in my Go Tech what glow plug do you reccomend?
Its a 5 port .21
Last edited by GenReaper; 08-16-2007 at 04:54 AM.
#10
Nice, it looks good. I love my GO .21 5-Port too. I think it screams for the price you pay and the contingency program just makes it an awesome motor.
I think they already have a GO .28, Ive seen it saying that on one site, cant remember where, maybe the OFNA but not sure. GO to www.racefactorindustries.com and Im sure Russell will know. Or if you already know Massive Mods then Im sure he might know.
Oh, nice vids and pics.. that thing was GOing pretty good.
I think they already have a GO .28, Ive seen it saying that on one site, cant remember where, maybe the OFNA but not sure. GO to www.racefactorindustries.com and Im sure Russell will know. Or if you already know Massive Mods then Im sure he might know.
Oh, nice vids and pics.. that thing was GOing pretty good.
#11
here ya go straight off the race factor industries website
http://www.racefactorindustries.com/catalog/i63.html
http://www.racefactorindustries.com/catalog/i63.html
#12
Yes the Go Tech comes in .25 and .28 with and without ext start mech with roto and pull start options or back plate option. We will be bringing these in for the Australian market in a few weeks , please pre order now as they will be gone before they hit our shores.
All retail pricing will be avalable from us
Cheers M
PS we use Go tech #5 plugs or LRP #6 Turbo
Cheers MnM
All retail pricing will be avalable from us
Cheers M
PS we use Go tech #5 plugs or LRP #6 Turbo
Cheers MnM
#13
hey guys if ur lookin for a go motor i have a 7 port 4sale in the 4sal page of rctech.. its under hobby room clen out... sorry to bother just trying to sell it...
#15
We ran a Go 7 port in a 2 hour endurance... I was pretty damn impressed. Each stop it temped at 215.. and we had amazing power the whole night.
I was a skeptic due to the cost of the engines.... I am a believer now.
I was a skeptic due to the cost of the engines.... I am a believer now.